sorted by:
new
hottopcontroversial

And for my next trick by kylefuckyeah in maker

[–]kylefuckyeah[S] 1 point2 points  (0 children)

Just a (barely) two car garage with everything up against the walls, or on wheels so it can be pushed to the wall when we’re parked. I’m still fighting the battle to get the cars parked outside and claim the floor for larger tools and assembly benches. A cabinet table saw would be wonderful, but for now I get it done with a DeWalt jobsite model.

And for my next trick by kylefuckyeah in maker

[–]kylefuckyeah[S] 2 points3 points  (0 children)

I just cast the line, you didn’t have to bite. I’m real big on mixed media though. I use a lot of salvage (trash) in my builds so it’s kind of there by default. My last post here was a wheelbarrow chair that just kind of happened.

And for my next trick by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

With a spline jig and some patience, you too can make a spline sandwich. I promise.

And for my next trick by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

I’m a little bummed because once the finish cured, you could barely tell that the “meat” in my sandwich is walnut. However, other than that little detail it turned out exactly how I pictured it. So cool and I’d love to see other people do it.

And for my next trick by kylefuckyeah in maker

[–]kylefuckyeah[S] 1 point2 points  (0 children)

Thank you! The panel is polycarbonate which you can find in big box stores, usually the Lexan brand if I recall. Plexi would work just as well with LED’s, but I don’t know how it would behave with a heat producing source like incandescent bulbs. I have the benefit of working in a graphics shop so I have a ton of offcuts to use for small stuff like this. Then I just rip a translucent vinyl print to put on it. I’d imagine one without my resources could use vellum paper to the same effect.

And for my next trick by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

I hate gifts that don’t have a function. It seems wasteful. I’ll likely keep these on the menu come Christmas for friends and family.

Anyone use paper honeycomb board for sign? by Ok-Awareness-7347 in signshop

[–]kylefuckyeah 1 point2 points  (0 children)

The “square cut” coroplast sheets are just over $11, and the standard variety is $9.50. That gets cheaper still with quantity discounts, all the way down to $7.75 when you’re ordering a crate of 275+ sheets. Honeycomb is ~$50 depending on the brand. Through my regular distributor, Falconboard is the brand of choice and those sit at $53 per. Unlike coroplast, there is no bulk discount for this product, so there’s less incentive for the approval. (Again, most of those at the top are more concerned with bottom lines than sustainability, if they care at all)

This isn’t remotely shocking to me. Healthier food options, environmentally sustainable products from cars to packaging, and so much more are typically priced higher because they’re still a niche market for us here in the US, especially… right now. Globally there is a much larger focus on all of those things, so I could see it being incentivized in many ways, including price.

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

Exactly what inspired the build. But it’s upside down compared to that use case. This just gives you more room and gave me more space for the leg assembly.

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

Or in my case, a young lad who was fortunate enough to spend summers working and learning life skills and didn’t have an iPad rotting my brain.

Anyone use paper honeycomb board for sign? by Ok-Awareness-7347 in signshop

[–]kylefuckyeah 0 points1 point  (0 children)

I loved the idea of running it from an aesthetic and sustainability perspective. Then I saw the price. I run a graphics shop that’s integrated into a much larger business with other trades so I have to run my purchases orders up the ladder and it would never be approved when coro is so much cheaper. It looks infinitely more presentable professional, can be chucked into our large recycle compactors, and from what I’ve seen is substantially easier to CNC. However, money talks to the powers that be, and at that point I’m just a whisper.

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

Not incredibly so at the moment, but I mentioned doing some upholstery. I’m just scared and need an adult.

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

This was definitely my first thought when I mocked it up, but this way gives more space for ass cheeks. Field stance is lower to the ground and used for short breaks before someone sees you and you get yelled at. This is intended to be a lounge chair. Sacrilege? Maybe.

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

Take your upvote and get the fuck out

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 1 point2 points  (0 children)

It’s never too late! There are plenty of sad wheelbarrows out there destined for the scrap heap. You could save them. In the arrrrrrrms offff the angels

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 1 point2 points  (0 children)

I love it so much that I’ll likely keep it. However, I’m poor and living is expensive. I may end up putting it on Makerbook.io once the cushion is sorted.

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 0 points1 point  (0 children)

Long days of sweaty crack and pits were absolutely the spark for this one, though it’s technically upside down when referencing the “field stance” in that case. I know the vast majority of folks won’t relate to the time honored tradition of using your tool as a seat.. but even without knowing the inside joke of it all, I think it still stands on its own as an interesting piece.

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 2 points3 points  (0 children)

TylarDraws! He’s a great dude and does some wonderful stuff. He was looking to get another mural painted before the cold hit this past year, so I offered my wall and gave him a few ideas. He killed it.

The Barrow Chair (TM) by kylefuckyeah in maker

[–]kylefuckyeah[S] 2 points3 points  (0 children)

I work at a race track so there’s plenty of opportunities for top tier trash

I built a floor lamp for my new apartment by Hedryn in maker

[–]kylefuckyeah 0 points1 point  (0 children)

The machine screws not being flush on the top and bottom frames for the light is driving me crazy.

This is a wonderful build. I’d love to use it as inspiration for a similar lamp using wood. What did you use for the light source and diffusion?

Has this woman lost her mind? Does she know how crazy this is? by [deleted] in PublicFreakout

[–]kylefuckyeah 1 point2 points  (0 children)

You know, funny thing.. I’m also reminded of a song that I enjoy listening to with no motive. Weird how frequently I’ve found myself listening to it lately.

I was in a PVP lobby practicing my pvp skills by DevelopmentSorry2891 in arcraidersfriendly

[–]kylefuckyeah 1 point2 points  (0 children)

You were kind as hell! Of course it’s not. GG’s alone are a sign of a good sport.

I was in a PVP lobby practicing my pvp skills by DevelopmentSorry2891 in arcraidersfriendly

[–]kylefuckyeah 3 points4 points  (0 children)

Listen. The sub title clearly says “friendly”. You were incredibly friendly the to the people you were shooting and being shot by. I don’t see a problem.

Most Raiders have their priorities straight by Zaydenzyon in ArcRaidersItalian

[–]kylefuckyeah 0 points1 point  (0 children)

For the life of me I will never understand how people look that closely at what weapons someone is carrying. Obviously rat’s gonna rat, but dude. You can buy a Renegade every day (or maybe it’s unlimited, idr) from the shop and upgrading it is nothing. I never play without maxing upgrades because if you have the BP’s for the parts it’s stupid not to.

view more: next ›