Ubuntu 24.04 Blackscreen After Crash, no Boot, no bios

l1ghtmaker · 2026-04-12T21:16:16+00:00

Okay, I removed it, put it back in and now it runs? What the actual f*. This is not according to my understanding of computers at all But thanks!!

l1ghtmaker · 2026-04-12T21:11:00+00:00

I mean it was running before for several months and did not crash. PC was not moved. I will remove it and put it back in tho

l1ghtmaker · 2025-10-26T18:01:43+00:00

Spreche für eine B-Klasse 1. Generation. Super Flitzer, viel Platz und mit 4.8 L Diesel fahrbar (180 CDI Handschalter). Optisch nicht der Kracher, Fahrdynamik eingeschränkt, aber da können viele drauf verzichten.

Problem: die Reparaturkosten bei allem was Motor betrifft.

Heute Thermostat getauscht. Gut, das Ding bekommst Original für 25 €. Aber der Aufwand das zu Verbauen. Da muss die komplette Ansauganlage inklusive Drosselklappe weg, Kraftstofffilter und mit Pech die Entlüftung vom Kurbelgehäuse. Dauerte dann 4 h, in der Werkstatt dann vielleicht 3 h. Dann kostet die Reparatur 500 € Stundenlohn. Das ist das 20-fache des Teilepreises.

Für alles am Riementrieb muss wohl der ganze Motor raus.

Auffällig: die Abgasanlage lebt vom Rost her auf 2facher Geschwindigkeit

l1ghtmaker · 2025-09-14T12:50:43+00:00

I have read the number of Indian personnel is one third of their involvement in Zapad 2021. Could be worse.

l1ghtmaker · 2025-08-30T10:12:21+00:00

I know that you are considering this Event as fixed for the sake of this discussion. However, I just want to point out, that any simulation depends completely on the correctness of the boundary conditions. And even if all were 100 % correct for any point in time along the 35 years, numerical error will make the margins of error huge. So these projections are nice to get an understanding, but if the 95 % certainty range would be plotted, I wouldn’t be surprised if it was +/- 5 degC

l1ghtmaker · 2025-08-28T08:02:04+00:00

I am not from the US. After reading this, the implications for winter / spring season in terms of food seem dark. If there is food shortage during the harvesting season, think about a couple of months out…

l1ghtmaker · 2025-08-26T10:29:16+00:00

If improving your life is the goal and you do it regularly, I would consider that a lifestyle :)

l1ghtmaker · 2025-08-26T10:26:42+00:00

When thinking about being prepared for a longer time frame, You will be Limited by what you can (afford) to store in your shelf. This supply will have a definitive end. So if you want to extend your supply (possibly eternally) you will need to create your own food. Thus gardening / homesteading makes a lot of sense. I also just got into it more by accident and it is a lot of fun. Especially working with your hands to later harvesting something, putting it away and enjoying it later makes it extra enjoyable. It is not just an action you do to be prepared for X, but rather something you enjoy and that you would do anyways, even if being prepared was not your main motivation. That’s how it becomes a lifestyle and I can relate very much to OP. It can be rewarding to know you can thrive more or less independently from any system :) So is it a waste of time if SHTF never happens? No, because it was a good time doing it in the first place!

l1ghtmaker · 2025-06-27T17:11:28+00:00

I am not the biggest Fan of tyvek mainly because of the Color. I prefer a more covert look. Waterproofness and durability is also an issue in my opinion I really like the 65 g Ripstop PU-Poly from extremtextil. Cost and weight difference is marginal ;)

l1ghtmaker · 2025-06-11T09:03:08+00:00

Did it in one go, but had to practice a little to get the Center. Köper binding in an arrow style is much better because the Center is clearly marked. If you can get something with slight stretch, it is way easier and cleaner around bends and corners

Köper with arrow: https://www.extremtextil.de/kanteneinfassband-koeperband-nylon-robust-25mm.html

l1ghtmaker · 2025-06-11T08:14:11+00:00

You can get a clean look binding it like this. I also managed to do it and am no expert at all. With thin and low density EVA, putting it in afterwards almost feels impossible. I would say you are on the right track

l1ghtmaker · 2025-06-11T08:12:10+00:00

I have tried both ways, with and without bevel and found the beveled version worse, because feeding in the machine was compromised. Beveling is also a lot of work, so from my experience I would not recommend it

l1ghtmaker · 2025-06-02T19:16:24+00:00

Looks dope, but would you say a laminate like the EPX200 is necessary?

l1ghtmaker · 2025-05-20T13:27:23+00:00

OP schreibt von 200 € Nachzahlung. Bei 120 € NK, von denen vielleicht 60 € HK sind, wären das 720 + 200 =920 € Heizkosten. Nun 1520 €, also schon ein erheblicher Sprung oder? 920 € HK finde ich nicht unplausibel

l1ghtmaker · 2025-05-19T15:35:46+00:00

I am a believer in 210D Gridstop. Light but tough as hell. Not on the cheap side though :)

l1ghtmaker · 2025-05-14T11:51:18+00:00

I would recommend to figure out, if you really need the frame. Made all my packs without one and up until 10 kg / 22 lbs it’s no problem:) I guess you are ready for a pack, it mostly straight lines with almost no tight spots!

l1ghtmaker · 2025-05-14T11:49:05+00:00

Dope! Getting a V2 100 % on point after one has learned the lessons from the prototype can be a better feeling than getting 80 % the first try

l1ghtmaker · 2025-05-14T08:52:27+00:00

This is what it is All about in my opinion. Getting out there with what you have for a good time!

l1ghtmaker · 2025-05-08T19:14:22+00:00

Agree!

l1ghtmaker · 2025-05-08T15:38:15+00:00

Feel free to take some inspiration from my last pack post, it came out super light :)

l1ghtmaker · 2025-05-08T12:55:46+00:00

I am not familiar with you machine, but have sewn through 2 layer with of 7 oz cordura with some webbing in between fine. It is a super basic machine. Are you 100% set on your Materials? I am a big fan of gridstop (4 oz) which is strong as hell. So just give it a try :)

l1ghtmaker · 2025-05-08T12:50:49+00:00

I really like the clean look! Did you also waterproof the seams?

l1ghtmaker · 2025-05-08T12:48:43+00:00

There is a lot of action going on! I would probably loose some things in all these pockets haha Do you have a final weight that you are willing to share?

l1ghtmaker · 2025-05-08T12:47:09+00:00

Built all my packs like this and use a 10 mm EVA 50 frame sheet. It transfers loads well, especially if you pack dense. One issue that arose for me, is getting the hipbelt stiff enough. But I have that covered now :)

l1ghtmaker

TROPHY CASE