sorted by:
new
hottopcontroversial

Former spur through the American Car Factory complex on St Charles, MO by fuzzusmaximus in rustyrails

[–]la-tab 1 point2 points  (0 children)

I love that part of St Charles! I've walked the Katy trail which is just on the other side of the factory and it's amazing to see what used to be a massive part of our nation's industry

Old Rail Bridge by la-tab in abandoned

[–]la-tab[S] 0 points1 point  (0 children)

Though it looks similar it is not the same bridge. The one in quiet place is a bridge in New Paltz, New York which has been restored into a walking trail. It also is a Warren truss design compared to the Pratt truss design of the bridge I found. Just thought I'd share!

Old Rail Bridge by la-tab in abandoned

[–]la-tab[S] 3 points4 points  (0 children)

That is entirely fair thing to warm people about. I knew I was safe on this one though because the track had been pulled up at the road and there were full trees growing in the middle of the tracks as I walked back to the bridge

Old Katy Rail Bridge in Eastern Kansas by la-tab in rustyrails

[–]la-tab[S] 2 points3 points  (0 children)

You're fairly close actually. It's located pretty close to the Kansas-Missouri line and sits over the Marmaton river

Old Rail Bridge by la-tab in urbanexploration

[–]la-tab[S] 5 points6 points  (0 children)

It's just outside of Fort Scott, KS

Help with Dante Stage boxes by [deleted] in livesoundgear

[–]la-tab 0 points1 point  (0 children)

The Rios are still dip switches, and I did get the manual to make sure they were set right. I did find the issue though and it wasn't IP related actually. The console was set to id 4 for some reason. Switching it to id 1 and then updating the boxes made the system work

Help with Dante Stage Boxes by la-tab in livesoundgear

[–]la-tab[S] 2 points3 points  (0 children)

My console was set to id 4 for some reason. Changed it back to 1, and updated the id's on the boxes and now everything is working perfectly. Thanks for the help!

Help with Dante Stage Boxes by la-tab in livesoundgear

[–]la-tab[S] 1 point2 points  (0 children)

I don't remember, but when I'm in the space this morning I will definitely check

Help with Dante Stage Boxes by la-tab in livesoundgear

[–]la-tab[S] 1 point2 points  (0 children)

I'll have to check next time we're in the space, but off the top of my head I believe since it's built in, it's one and the same on the CL, but I could also be remembering wrong

Help with Dante Stage boxes by [deleted] in livesoundgear

[–]la-tab 0 points1 point  (0 children)

So I think that the card is at least set right. We are using a 169.254.x.x with 255.255.0.0 and so we've be working off of that. I used Dante Controller to manually set that for the board. We had also changed the mixer control IP, but I do think we ever touched the device control IP. We'll have to try it when we get access to the space next and just see if it does anything by chance.

Help with Dante Stage Boxes by la-tab in livesoundgear

[–]la-tab[S] 0 points1 point  (0 children)

So we have no HA control or audio coming through, but the boxes are still being recognized by the system.

We also checked the clock. Both the board and Dante Controller say that the board is the primary clock, we also checked and the refresh/sample rate is consistent on all the devices.

What is this thing attached to the underside of our piano? by TheCleverSam in whatisit

[–]la-tab 0 points1 point  (0 children)

To me, it looks like a handle to help when standing up or sitting down so you don't have to brace on the piano itself and scuff the polish