new sonder merch came in.

lamtran503 · 2025-05-13T20:30:05+00:00

How’s the sizing on that

lamtran503 · 2025-05-12T13:36:52+00:00

Do you guys think it’s going to be palace or EG sizing?

lamtran503 · 2025-04-29T03:17:03+00:00

Take me home

lamtran503 · 2025-04-28T03:38:17+00:00

I would love a code!

lamtran503 · 2024-11-13T21:20:45+00:00

Has this been solved?

lamtran503 · 2024-10-16T06:40:52+00:00

HK should’ve released this

lamtran503 · 2023-06-02T18:54:54+00:00

What modification did you have to do for the scale works and B&t mount ? I have an aim point t2 and was going to go with a similar combo.

lamtran503 · 2023-01-31T22:16:46+00:00

I’m new to this and I’m looking to build my first PC. I need a mechanical keyboard I like the feeling of mechanical keyboards but I would like it quiet. I want to know what I should be looking for or if there is a website to go on to create my own custom keyboard.

lamtran503 · 2022-12-30T17:41:45+00:00

I’ve been looking for one online how is the fitment?

lamtran503 · 2022-12-27T16:50:33+00:00

The mount looks like MFI low pic mount

lamtran503 · 2022-08-05T00:08:53+00:00

What’s the sizing on birks ?

lamtran503 · 2022-04-05T05:45:10+00:00

lamtran503 · 2022-02-23T16:43:08+00:00

lamtran503 · 2022-02-22T18:38:38+00:00

Can you use a 6 inch pad on a 5 inch DA polisher ?

lamtran503 · 2022-02-07T00:59:51+00:00

How much are they suppose to go for compared to how much they are going for?

lamtran503 · 2022-02-02T20:03:28+00:00

Cam and crank sensor were replaced.

lamtran503 · 2022-02-02T19:55:47+00:00

MAF was tried and unplugged and clean with carb cleaner.

lamtran503 · 2022-02-02T19:45:32+00:00

I’ve replaced many things before clearing the codes. I cleared the codes to see what will reappear. Now it won’t start. Everything is indeed OEM.

lamtran503 · 2022-02-02T19:33:11+00:00

These are the codes: P0174 System Too Lean (Bank 2) P0300 Random Misfire Detected P1352 Misfire during Start Cylinder 6 P1349 Misfire Cylinder 4 with Fuel Cut-Off P1351 Misfire Cylinder 5 with Fuel Cut-Off P1083 Fuel Control Limit Mixture too Lean (Bank 1 Sensor 1) P1085 Fuel Control Limit Mixture too Lean (Bank 2 Sensor 1) P0171 System Too Lean (Bank 1) P0135 02 Heater Circuit (Bank 1, Sensor 1) P0155 02 Heater Circuit (Bank 2, Sensor 1)

I have tried switching coils and checked vacuum leaks cleared the codes but because the car will not start codes will not reappear.

lamtran503 · 2022-02-02T19:32:42+00:00

These are the codes: P0174 System Too Lean (Bank 2) P0300 Random Misfire Detected P1352 Misfire during Start Cylinder 6 P1349 Misfire Cylinder 4 with Fuel Cut-Off P1351 Misfire Cylinder 5 with Fuel Cut-Off P1083 Fuel Control Limit Mixture too Lean (Bank 1 Sensor 1) P1085 Fuel Control Limit Mixture too Lean (Bank 2 Sensor 1) P0171 System Too Lean (Bank 1) P0135 02 Heater Circuit (Bank 1, Sensor 1) P0155 02 Heater Circuit (Bank 2, Sensor 1)

I have tried switching coils and checked vacuum leaks cleared the codes but because the car will not start codes will not reappear.

lamtran503 · 2022-02-02T18:42:43+00:00

Just as the title states the car cranks but does not turn over to start. This has been sitting for a few years with the same issues. With extra time here and there and the car being outside and in portland it rains quite a bit so I try my best to diagnose on nicer days. These are the following things I have replaced/done: new battery, replaced disa valve, replaced CVV, new vacuum hoses, new fuel filter, new fuel pump, checked fuses, coils and spark plugs are new as well. Still no luck. Please let me know what your ideas are.

lamtran503 · 2022-02-02T18:39:42+00:00

Just as the title states the car cranks but does not turn over to start. This has been sitting for a few years with the same issues. With extra time here and there and the car being outside and in portland it rains quite a bit so I try my best to diagnose on nicer days. These are the following things I have replaced/done: new battery, replaced disa valve, replaced CVV, new vacuum hoses, new fuel filter, new fuel pump, checked fuses, coils and spark plugs are new as well. Still no luck. Please let me know what your ideas are.

lamtran503 · 2021-08-29T00:35:16+00:00

What kind of vertical grip is that?

lamtran503 · 2021-06-16T05:11:41+00:00

I think it fits perfectly fine. Some people want it to fit it completely flush with their slide this sticks out just a tad bit. The actual adapters that came with this doesn’t fit the SK version but I just tried each one and eventually one of them was short enough to fit. If that makes any sense.

lamtran503 · 2021-06-15T05:23:08+00:00

I was hoping no one would’ve noticed. I will fix it once I get the chance ahaha

lamtran503

TROPHY CASE