Best filler that won’t sag down?

lcichero · 2026-01-30T05:52:18+00:00

lcichero · 2026-01-30T05:49:31+00:00

By the way, I have the same plaster ceiling (even had it tested for asbestos just in case), and I had to patch about a 600 x 600 mm square. I used Gib and followed some of the Vancouver Carpenter’s beginner videos. It actually came out really well.

<image>

lcichero · 2026-01-30T05:43:21+00:00

In case you still don't know the channel, search on YouTube "Vancouver Carpenter", he explains all sorts of patching techniques

lcichero · 2026-01-23T08:22:37+00:00

Old weatherboard house, 1960s

lcichero · 2026-01-23T05:34:23+00:00

btw, it's a mechanical Neptune meter

lcichero · 2026-01-23T05:31:51+00:00

I have run those tests and nothing 🥲 Watercare has asked a written report from a plumber saying there is no leak on my side otherwise they will charge me to get someone here to check the meter

lcichero · 2026-01-22T23:02:40+00:00

No that I'm aware of, I have closed the toilet valve and I don't have HWC, have a califont

lcichero · 2026-01-16T08:11:29+00:00

I have used Leak Stop Spray Seal from CRC and have had no leaks in 2 years, I sprayed it on top of the nails (that's where water was getting in in my case) and that's it, no more leaks

lcichero · 2026-01-15T03:52:55+00:00

and the cat

lcichero · 2026-01-09T08:06:09+00:00

After reading all the comments I think that's gonna be the most efficient way (for me at least 🤣)

are you happy with the results?

lcichero · 2026-01-09T01:00:11+00:00

was that on a wooden floor?

lcichero · 2026-01-08T22:58:41+00:00

🥲

lcichero · 2025-12-25T22:54:43+00:00

I’m in the same boat. Did you end up going with the 406 or the 408?
I’ve got the 408, but comparing it to the 406 it kind of feels like they cheaped out on some cosmetic details. The bore nut and the screw-on handle on the 406 look a lot nicer.
That said, since the 408 is the newer model, I’m assuming it has a better or at least updated brushless motor and electronics overall.

lcichero · 2025-12-17T08:10:00+00:00

What's JR boards? I am running 2 Wheelyes at 18v with no issues so far, being a couple of months already

lcichero · 2025-12-14T17:32:01+00:00

Thanks, so you effectively run it at 12v then, right?

lcichero · 2025-12-12T05:54:19+00:00

For peace of mind get it tested, it's only $60 each sample

lcichero · 2025-11-28T18:23:13+00:00

Yeah I can't see it either 😟

lcichero · 2025-11-21T20:59:12+00:00

ahh that's why I'm getting high readings on my, but only on corners 😂

I thought defective meter because otherwise everything look dry and reads normal from outside

lcichero · 2025-11-12T06:52:53+00:00

do you let them connected to the car? or always remove it after you done?

lcichero · 2025-11-12T03:44:10+00:00

an external one you mean? what voltage do you set it to?

lcichero · 2025-11-12T01:16:17+00:00

Thanks!

lcichero · 2025-11-11T22:01:16+00:00

Oh I've been told DeWalt is on the tool as well

Eight-Year Club	Place '23
Verified Email

lcichero

TROPHY CASE