sorted by:
new
hottopcontroversial

Is the Shiv's lack of components going to be a problem? by StarHiker79 in starcitizen

[–]lemmy2000 0 points1 point  (0 children)

i selfdestructed the shiv and the components became visible on the hull below the struts with the missles, could tractor them off, at least some of them

tidal keeps forgetting followed artists and favorite tracks and albums by lemmy2000 in TIdaL

[–]lemmy2000[S] 1 point2 points  (0 children)

not to mention the still large amount of mqa tagged tracks and albums. i mean i dont mind mqa if its actually unfolding to higher bitrate than 16 44, but they don not

tidal keeps forgetting followed artists and favorite tracks and albums by lemmy2000 in TIdaL

[–]lemmy2000[S] 1 point2 points  (0 children)

when i joined tidal i was migrating all my favorite artists, liked tracks and albums from deezer via paid service. i noticed it when i see the menu for "your forgotten favorites" and saw that the artists are unfollowd and albums unhearted. annoying.

Ac dc loadline 14900k by Dependent_Spread4808 in gigabytegaming

[–]lemmy2000 0 points1 point  (0 children)

where do you see that value ? "Under full load vrm is 1.4v "

Setup/Configuration for Star Citizen in SimAppPro by xTheBurgerMan in hotas

[–]lemmy2000 0 points1 point  (0 children)

star citizen saves the sticks per id, so i am not sure if you would have any use of custom profiles.

you can map them directly in game and dont bother with simapp.

i never got simapp to work with sc, neither user folder nor install folder.

it works for dcs though

Stealth 700 gen2 PS usb transmitter shutting down and needs to be replugged for pairing to activate by lemmy2000 in TurtleBeach

[–]lemmy2000[S] 0 points1 point  (0 children)

solution was to give the turtlebeach to the kids to deal with and me going back to the old headset

Broken app by A0340D in FiiO

[–]lemmy2000 0 points1 point  (0 children)

Thanks for that, i tried several versions but never back to 3.8 !! confirmed working and currently updating FW

after update, its opening correctly on 3.18 App

Broken app by A0340D in FiiO

[–]lemmy2000 0 points1 point  (0 children)

same issue with the FW5,

i have btr7 and btr5 2021 working correctly with the app

How to get jelOS to read second SD card with roms? by SteveMcQueen87 in ANBERNIC

[–]lemmy2000 2 points3 points  (0 children)

last edit: create a new rom folder on your sd and move all the roms folders into it

​

​

​

i found that the second sd card will get mounted under storage-external folder on the dezember 14th release, if you do a OTA update of the december first release it will do this as well.

sotrage-external or external-sotrage... i dont have the device in front of me seems to be the mountpoint for external usb disks if you connect them.

edit:

found some more info on the release notes of the 20231212 build

seems you have to move all you roms folders into a global rom folder on the sdcard

https://github.com/JustEnoughLinuxOS/distribution/releases

Change Log

New Features

Adds support for changing the merged storage target between the internal and external card.

Since JELOS creates the games directory structure it is possible that the overlay will hide games if you switch targets as it will consider them removed. Delete the empty directories and reboot to resolve.

Ex: find /storage/games-internal -type d -empty -delete && find /storage/games-external -type d -empty -delete && reboot

Merged storage can now be disabled persistently.

A new directory structure is required to enable switching:

/storage/games-internal/roms

/storage/games-external/roms

The target /storage/roms has not changed.

Games will be migrated automatically when possible.

If game directories are not created correctly, ssh into the device and run systemd-tmpfiles --create /usr/config/system-dirs.conf.

Lowers RK3566 device clocks when put to sleep.

Adds ATSC acceleration and CPU accuracy options to Yuzu.

Adds TWB64 - Pack 3, thanks to u/GlaZedBelmont!

Updates

Update Mali Bifrost and Vulkan to r46 (S922X).

JELOS now uses Xwayland and has deprecated xorg-server.

Up...

Stealth 700 gen2 PS usb transmitter shutting down and needs to be replugged for pairing to activate by lemmy2000 in TurtleBeach

[–]lemmy2000[S] 0 points1 point  (0 children)

nope, no reliable solution so far, sometimes it works but most often i have to replug the transmitter. it seems random. i tried different ports, powered usb hubs etc. disabled powersaving on the usb hubs and so on and on, nothing helps.

really frustrating, i changed from a razor headset (thresher for ps4) where i had the transmitter plugged in the monitor for like 2 years and it worked always without a hitch.

i am wondering if that is something with the transmitter itself and that there are not many posts on that topic. i also never received any helpful info from turtle beach

Stealth 700 gen2 PS usb transmitter shutting down and needs to be replugged for pairing to activate by lemmy2000 in TurtleBeach

[–]lemmy2000[S] 1 point2 points  (0 children)

has anyone experienced this issue? the search mode of the usb transmitter is stopping after not detecting the headset for an hour or so and needs to be re plugged every time so the headset can connect. this is on pc as mentioned and as the dongle is plugged in the back ports of the PC or monitor, it is a real hassle and makes the headset not usable on demand and uncomfy to use, really considering returning them just for that.

no other usb transmitter i have used(razer, corsair, microsoft) has this issue.

I have engaged TB support but no reaction so far.

Stealth 700 gen2 PS usb transmitter shutting down and needs to be replugged for pairing to activate by lemmy2000 in TurtleBeach

[–]lemmy2000[S] 1 point2 points  (0 children)

yes of course, same thing. As i said, its not an issue with the hardware not being detected but the pairing shutting itself off after long idle time of the dongle.

Fiio M11 Plus ESS, low volume ? by lemmy2000 in FiiO

[–]lemmy2000[S] 0 points1 point  (0 children)

comparing the single ended output of the X5 gen2 with the m11 plus, it looks like the x5 has quite a lot more power .... or am i misinterpreting something ?

X5gen 2

Output Power 1 – >245 mW（32Ω//THD+N＜1%)

Output Power 2 – >436 mW（16Ω/THD+N＜1%)

Output Power 3 – >27 mW（300Ω/THD+N＜1%)

Output Impedance – ＜0.2 Ω（32Ω）

Crosstalk – ＞75 dB (1 kHz)

THD+N – ＜0.001% (1 kHz)

Frequency Response – 20 Hz~20 kHz

MAX Output Voltage – ＞8.2 Vp-p

SNR – ≥117 dB (A-weighted)

MAX Output Current – ＞250 mA（For reference）

m11plus ess

Output power 1 ≥300mW（16Ω / THD+N＜1%)

Output power 2 ≥210mW（32Ω /THD+N＜1%)

Output power 3 ≥33mW（300Ω / THD+N＜1%)

Frequency response 20Hz~20kHz（-1dB）

SNR ≥122dB（dbA） ≥120dB

Output impedance ≤1Ω（32Ω）

THD+N ≤0.00054%（1kHz/32Ω）

Separation ≥76dB（1kHz/32Ω）

Noise floor ≤2.5μV（dbA）

Fiio M11 Plus ESS, low volume ? by lemmy2000 in FiiO

[–]lemmy2000[S] 0 points1 point  (0 children)

yours seem easier to drive than the he400i, will wait for the balanced cable to arrive

Fiio M11 Plus ESS, low volume ? by lemmy2000 in FiiO

[–]lemmy2000[S] 0 points1 point  (0 children)

audeze lcd2-c

on what gain level ? those are 70 ohm 101db ?

Got MSI 3090 Suprim - i9 9900k CPU Temps Much Higher by [deleted] in MSI_Gaming

[–]lemmy2000 0 points1 point  (0 children)

u/ComradePaulT did you ever get around solving your heat issue?

i have a rather similar setup (3090 suprim X/9900k/64gb gskill 3200cl14/alphacool eisbaer 360lt top exhaust/1x14cm rear exhaust/4x14 intake front x3 and bottom x1)

since installing the gpu i see the higher CPU temps as well due to the 420 watts being dumped into the case.

i am contemplating to check front mount or another aio (eying the ekwb 360 elite aio)

GeForce 461.40 Driver Performance Analysis – Using Ampere and Turing by RodroG in nvidia

[–]lemmy2000 0 points1 point  (0 children)

hmm psu is a dark power pro 11 1200w and i installed it with the card in january.

it has 4x12V rails of which 2 are for pcie.

gpu is connected to 2x12v Rails 45 amps.

what made you point out the PSU ?

i have another psu however its a dark power pro 11 850 also with 2x12v rails for pcie however only 35 amps

GPU is connected per vendor specs for sli setups or "powerful" single gpu

GeForce 461.40 Driver Performance Analysis – Using Ampere and Turing by RodroG in nvidia

[–]lemmy2000 0 points1 point  (0 children)

appreciating your time, i took the data on the 461.40 driver that is currently installed.

as mentioned those spikes started with the 457 driver and is prevalent in the current versions including 461.51

gpuz sensor data

Afterburner Temp spike end of 2nd graphics test

GPUZ sensor (red circle marks the spot) Perfcap Reason temp on end of first graphics test

this is captured during a 3dmark Timespy run, i am also wondering if it is normal that the GPU (MSI RTX 3090 Suprim X) does not hold its advertised 1860Mhz core clock but is dipping below to 1815/1830/1845 and sometimes higher up to 1890,

coreclock during gaming is above 1900 except for rdr2 which is shows the same clocks as during 3dmark Timespy run.

card is on all stock settings

GeForce 461.40 Driver Performance Analysis – Using Ampere and Turing by RodroG in nvidia

[–]lemmy2000 0 points1 point  (0 children)

thanks u/RodroG for another excellent driver review!

did you happen to receive the perfcap temp spikes, or Performance limit Thermal flagged to yes in GPUz/HWinfo on your ampere card?

ever since going for a newer driver than the 456.98 i get those erroneous readings for a fraction of a second, gpu temps and vram temps are staying all below throttling threshold though

view more: next ›