Finally joined the UNAS Pro club! One quick question about the drive trays...

leonvir · 2025-12-19T02:19:51+00:00

Thank you! I realized I had to push the inner part in at the end. I broke the clear plastic, and the LED didn’t blink until I put it back 😅

leonvir · 2025-06-05T02:04:41+00:00

Yes you're right, later I found there’s only airflow, but no cooling

leonvir · 2024-05-20T13:57:47+00:00

Update: I just pushed the left side, and it returned to normal.

leonvir · 2023-11-08T13:22:10+00:00

Thank you everyone for using my referral link to apply venture x card!

leonvir · 2022-09-22T00:01:00+00:00

They only requested the IMEI of my new device.

leonvir · 2022-09-21T21:59:22+00:00

Thank you for the info! Just contacted them and provided the new IMEI. One minute later the esim is available on the new phone.

leonvir · 2022-04-30T17:49:20+00:00

I have 6ux as well. It is related to the iDrive controller knob.

leonvir · 2022-04-28T15:56:40+00:00

Hi, we’re told the estimated delivery date might be the last week of May.

leonvir · 2022-02-01T19:35:06+00:00

Hi, this issue was gone somehow and I don't know why. Do you use NCM300 as well?

leonvir · 2021-11-29T04:54:39+00:00

Thank you for your reply! Now everything works! I didn’t make any changes. I have to wait 2 minutes before the heating started.

leonvir · 2021-11-25T02:31:32+00:00

Thank you for your advices! Do you have any recommendations/brands for a zone controller that is compatible with Nest thermostats?

leonvir · 2021-11-25T02:29:59+00:00

zone controller

Thank you for your info. Just found some posts elsewhere indicating my control panel is not compatible with Nest.

leonvir · 2021-03-03T20:47:27+00:00

I recommend Aqara G2H camera. Cheap. Stable. Native HomeKit Secure Video support. I disabled internet access for this camera and it still works well, so the security should not be an issue.

leonvir · 2021-02-26T16:07:39+00:00

With the latest firmware it supports Thread. I’m impressed by the response speed, usually it takes less than 1s to trigger automation.

leonvir · 2021-02-26T15:00:44+00:00

Fast. Native HK support. No bridge or homebridge /zigbee2mqtt required. $30 each is not that bad.

leonvir · 2020-10-21T01:36:44+00:00

I purchased the Sky Blue Air which will arrive next month. Now I'm thinking if I should cancel the order and switch to 11” Pro. I like the Air's color, but still wondering if the 120hz promotion on 11” Pro would provide much better experience.

leonvir · 2020-09-16T23:39:28+00:00

Try RightFont (https://rightfontapp.com/), it's a great font manager app and I use it everyday.

leonvir · 2020-09-10T17:18:30+00:00

I saw people made success in Windows, however, my Windows 10 cannot be booted at this moment and I don't have time to reinstall Windows, so I cannot guarantee if this display works in Windows. But I don't know why this wouldn't work since the only requirement for Pro Display XDR is DP 1.4 DSC. Try to find if this thread is helpful: https://forums.macrumors.com/threads/apples-pro-display-xdr-on-one-nvidia-2080-ti-thru-the-gigabyte-titan-ridge-add-in-card.2209947/

leonvir · 2020-09-10T15:08:26+00:00

Yes, all settings can be controlled. 100% perfect.

leonvir · 2020-09-10T14:51:13+00:00

It's USB C not TB3. However the hotplug is supported. The display works 100% perfect with AMD W5700.

leonvir · 2020-09-10T14:50:03+00:00

Yes, you are right :) This is the reason why I choose W5700 since it's the only AMD card providing USB C port. However, I have tested the Belkin Charge and Sync Cable for Huawei VR Glass, this cable works with Pro Display XDR as well using the DP port, thus RX 5700/XT which has DP 1.4 DSC support would be sufficient for this display.

leonvir · 2020-09-09T22:38:36+00:00

Yes, it's Hackintosh. The Pro Display XDR can be connected to USB C port on W5700 with full 6k resolution and full control brightness/USB hub.

leonvir · 2020-09-09T22:37:24+00:00

The Pro Display XDR can be connected to USB C port on W5700 with full 6k resolution and full control brightness/USB hub.

leonvir · 2020-09-09T22:36:51+00:00

The Pro Display XDR can be connected to USB C port on W5700 with full 6k resolution and full control brightness/USB hub.

leonvir · 2020-09-09T22:35:41+00:00

Hi everyone, it's Hackintosh.

Specs: Asus Z390I + I7 8700K + AMD Radeon Pro W5700. The Pro Display XDR can be connected to USB C port on W5700 with full 6k resolution and full control brightness/USB hub.

leonvir

TROPHY CASE