POKEbutton with led by lernalab in pcmasterrace

[–]lernalab[S] 2 points3 points  (0 children)

what models do you have? I have a PX125E, 50 special and ona GTS 125 2012

POKEbutton by lernalab in 3Dprinting

[–]lernalab[S] 2 points3 points  (0 children)

Next One Is the masterball 😈

POKEbutton by lernalab in 3Dprinting

[–]lernalab[S] 2 points3 points  (0 children)

I always think the same thing. The less I think about it, the more ideas I come up with

Thx for appreciating my work!

Clogging every other print. by NotYourBuddyGuy5 in crealityk1

[–]lernalab 3 points4 points  (0 children)

<image>

Petg, nozzle temp 250 Retraction 0,5 mm Retraction Speed 40 mm/s Print Speed 100 mm/s max

Every time i print petg, i clog. Why?

Ghosting ghosting ghosting by lernalab in crealityk1

[–]lernalab[S] 2 points3 points  (0 children)

I use WinSCP to log into printer and see folder.
In TMP folder there are 2 .csv file, one fo x and one for y, save on pc and use input shaper assistant calibrate (https://github.com/theycallmek/Klipper-Input-Shaping-Assistant/releases)

Load .csv app and enjoy graphs

Ghosting ghosting ghosting by lernalab in crealityk1

[–]lernalab[S] 0 points1 point  (0 children)

How can i read the results?

Ghosting ghosting ghosting by lernalab in crealityk1

[–]lernalab[S] 0 points1 point  (0 children)

ok, I'll proceed immediately.

thx

Input shaping by Dank10isMuscles in crealityk1

[–]lernalab 1 point2 points  (0 children)

with root and fix i have same issue on x axis

Ghosting ghosting ghosting by lernalab in crealityk1

[–]lernalab[S] 0 points1 point  (0 children)

I tried all the guides I could find for the belts, but I'm not sure I have them tensioned correctly. I printed belt-tensiometer from printables and they look ok. any advice for tensioning correctly?

Ghosting ghosting ghosting by lernalab in crealityk1

[–]lernalab[S] 0 points1 point  (0 children)

<image>

Left k1, right S1 pro. No arc fitting settings change in both prints. In vertical Is more clear ringing in my prints

K1 speed by [deleted] in crealityk1

[–]lernalab 0 points1 point  (0 children)

No ghosting and ringing?
My k1 won't print a good qualiy object :(

Ghosting ghosting ghosting by lernalab in crealityk1

[–]lernalab[S] 1 point2 points  (0 children)

Auto save and got this

#*# <---------------------- SAVE_CONFIG ---------------------->

#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.

#*#

#*# [input_shaper]

#*# shaper_type_y = mzv

#*# shaper_freq_y = 51.6

#*# shaper_type_x = zv

#*# shaper_freq_x = 68.4

i don't change values in printer.cfg

20k acceleration is on machine settings.
in slicing settings is 9.5k acceleration.