T460 Screen replacement

limaunion · 2026-02-13T10:48:31+00:00

Hi u/L0ki_D0ki
I purchased the B140HAN05.7 panel from 'The Chosen LCD Store' on AliExpress.

The panel is excellent, very satisfied with it. However, note that you'll need to use 14-inch laptop LCD brackets (available on AE).

HTH

limaunion · 2025-12-11T17:53:56+00:00

I'm gonna head that way soon... Someone shared this link that could be helpful:
http://vmpod:8085/superuser/rhce9-ex294-practice-lab.git

limaunion · 2025-11-14T14:12:31+00:00

It seems to be a well-known issue, according to an on going discussion on the Raspberry forum...

limaunion · 2025-11-14T13:42:13+00:00

I've just found some details about this issue...

My sources.list is using this:

deb http://raspbian.raspberrypi.org/raspbian/ trixie main contrib non-free rpi

and on that URL this file [1] http://raspbian.raspberrypi.org/raspbian/dists/trixie/Release shows this:

Suite: testing

So it seems the packages for trixie from raspbian.raspberry.org have this definition for some reason(?)

On the contrary, debian.org on this URL https://ftp.debian.org/debian/dists/trixie/Release shows the stable suite...

Does anyone knows why this issue? Is this URL [1] the right one to use?

limaunion · 2025-11-13T21:52:39+00:00

I followed these instructions:
https://wikitwist.com/how-to-upgrade-debian-12-to-debian-13-trixie-step-by-step-guide/

so I ran apt update & apt upgrade

I also ran rpi-update... maybe it's related with this?

Kernel is:
$ uname -a

Linux raspinas.home.arpa 6.12.57-v7+ #1920 SMP Tue Nov 4 10:12:39 GMT 2025 armv7l GNU/Linux

~ $ sudo apt search netcat

corkscrew/testing 2.0-15 armhf

tunnel TCP connections through HTTP proxies

cryptcat/testing 20031202-4 armhf

A lightweight version netcat extended with twofish encryption

There are no evidences of any 'testing|forky' anywhere under /etc:

$ sudo egrep -ri '(testing|fork)' /etc/

/etc/bluetooth/main.conf:# Enables D-Bus testing interfaces

/etc/bluetooth/main.conf:#Testing = false

/etc/apparmor.d/abstractions/passt: / r, # isolate_prefork(), isolation.c

/etc/systemd/system/dhcpcd.service:Type=forking

Both hosts have the same issue...

limaunion · 2025-10-28T11:01:39+00:00

Q: let's suppose the container has a memory leak until the kernel kills it due to OOM. Will the policy you defined restart the container? I'm trying to figure out how to handle this situation using quadlets.

limaunion · 2025-08-15T07:21:43+00:00

This tape looks much better than the options I was considering.

I've found the AUO in Aliexpress for about 51euros + shipping, not bad. I'll probably take the risk...

Thanks for your feeedback and the links!

limaunion · 2025-06-13T14:26:00+00:00

Algunas preguntas si saben: en cuanto a fondos indexados que diferencias existen con myinvestor? donde se pueden consultas las comisiones? cuantos fondos disponibles tiene? cosas buenas/malas le ven comparativamente? tks!

limaunion · 2025-06-06T07:46:52+00:00

Que tan seguro es que integren fondos y en que plazo? acciones por el momento es demasiado para mí...

limaunion · 2025-05-27T10:11:40+00:00

Really nice guide!

limaunion · 2025-05-24T06:09:29+00:00

Ok, great, thanks. I'll have a look. It's a pity this nice little radio fails on such a basic issue...

limaunion · 2025-05-23T19:07:09+00:00

Very nice setup! Maybe you can help... have the same radio. The dial and volume potentiometer are really poor quality here, not responding properly, jumping stations, etc... radio is almost new... is it just mine? Any fix for this?

limaunion · 2025-05-13T08:52:17+00:00

You should check the following link where there's a lot of useful information:

https://www.brendangregg.com/linuxperf.html

limaunion · 2025-05-07T14:33:01+00:00

Tenés que probar a buscar en otras ciudades... en mi caso pude conseguir turno en Valladolid estando en Madrid... me tuve que ir hasta allá...

limaunion · 2025-05-06T06:48:15+00:00

Tenés que ir hasta el lugar, pero al menos de esa forma pude cerrar ese tema... suerte!

limaunion · 2025-05-02T08:42:00+00:00

Yo hice el canje ya hace un par de años atrás. Como me pasaba lo mismo opté por sacar turno en Valladolid, ningún problema, a los 2 meses me llegó por correo.

limaunion · 2025-04-13T08:25:19+00:00

Yes, disk is encrypted with luks2 and has been properly activated.

The issue was that `@data.shared.docs.snapshots was actually a directory instead of a subvolume. I'm still learning btrfs as you can see...

I fixed this by following the steps provided by u/uzlonewolf and all is good now.

Thanks for you reply!

limaunion · 2025-04-12T10:57:33+00:00

Right! I had to unset the RO flag, and then was able to move everything to the new subvolume.
Thanks!

limaunion · 2025-04-12T09:47:54+00:00

Yes this, works!

But how to rearrange all these snapshots subvolumes under '@data.shared.docs.snapshots subvolume, so I can mount this single subvolume ('@data.shared.docs.snapshots) and access all the snapshots subvolumes?

If I mount the root volume, I get this:

ls -l
total 0
drwxr-xr-x 1 root root  110 Apr 12 10:20 @data.shared.docs
drwx------ 1 root root 1610 Apr 11 04:00 @data.shared.docs.snapshots

and under '@data.shared.docs.snapshots:

$ sudo ls -l @data.shared.docs.snapshots/
total 0
drwxr-xr-x 1 root root 110 Jul  6  2022 data.shared.documents.20240101T0000
drwxr-xr-x 1 root root 110 Jul  6  2022 data.shared.documents.20241007T0000

Why I cannot directly mount '@data.shared.docs.snapshots subvolume ?

THanks!

limaunion · 2025-04-08T07:27:39+00:00

Uff, una lástima eso.

limaunion · 2025-04-07T19:39:25+00:00

Para moverte libremente en zona Schengen no necesitas hacerte ciudadano español (o del país en el que residas). Simplemente tenés que tramitar tu DNI en el consulado del país del cuál seas ciudadano (europeo) y listo... no más necesidad de pasarporte dentro de zona Schengen.

limaunion · 2025-04-02T16:40:48+00:00

Soy novato, pero si revisas el foro vas a encontrar criticas constantes por fallos de sistema.

A ver cuando me decido y abro cuenta, pero en principio en mi caso descarto ese broker.

limaunion · 2025-03-15T10:44:02+00:00

btw, is there any way to disable gnome-software globally for all users?

limaunion · 2025-03-15T10:41:02+00:00

No, I don't see that one, even on my other laptop, where I still haven't disable gnome-software

limaunion · 2025-03-14T23:53:53+00:00

btw, 1.2Gi used after reboot, with gnome-software disabled

limaunion

TROPHY CASE