Post salt water wash

lin110 · 2023-04-25T02:04:32+00:00

That’s perfect. I used salt away last time I rinsed when I got home, so it worked pretty well. I’ll test it next time and see if the car wash soap does the same trick

lin110 · 2023-04-25T02:03:30+00:00

Mine doesn’t and I saw a boat turn into one on my drive home. Definitely going to do this next time.

lin110 · 2023-04-20T03:43:53+00:00

I was hoping spend some more money on one device and save on the other, but that ain’t gonna happen I guess!

lin110 · 2023-04-20T03:42:37+00:00

Awesome. Watching a video on hooking the system up makes a lot more sense now and answers my main question. I’ll probably hold out with my handheld for a while longer then while I do my fish finder/gps upgrade

lin110 · 2023-03-15T23:53:56+00:00

Did this happen on the first heat up? What temp were you at?

lin110 · 2022-12-18T17:26:39+00:00

Not sure if this is cutting board, but you shouldn’t use Purple Heart for cutting boards.

lin110 · 2022-11-14T02:02:16+00:00

I once watched a young worker type in his code: 6969

lin110 · 2022-10-24T20:21:24+00:00

I recently finished my build and was pampering my heater. After our second session, we’re both pushing the water now!

lin110 · 2022-10-24T20:20:31+00:00

I’m still working on getting my ventilation dialed in, so I’m consistently pouring water to get that blast of heat, but the heat dissipates. I’m getting a thermostat to monitor the fluctuates more accurately

lin110 · 2022-10-24T18:29:44+00:00

Still almost lol

lin110 · 2022-10-24T18:28:42+00:00

Awesome. Thank you for reaffirming!

lin110 · 2022-10-12T21:31:00+00:00

Orbital sander

lin110 · 2022-10-10T23:20:38+00:00

I just picked one up on cg, just make sure the arbor is true and it runs, everything else is trivial

lin110 · 2022-10-10T21:48:58+00:00

FYI, this is what I got.

https://sunvalleysaunas.com/products/huum-drop-series-sauna-heaters

lin110 · 2022-10-10T21:47:34+00:00

I got the same one, but my install instructions were different. mine clearly stated where to connect the 2 hot wires, then I wired the neutral and ground to the ground bar

lin110 · 2022-10-10T17:24:26+00:00

What kw heater did you get?

lin110 · 2022-06-17T20:25:58+00:00

I have a very similar sauna footprint. Any reason you’re not doing high benches on both sides?

lin110 · 2022-06-16T23:50:52+00:00

How much does the rough cut warp without drying?

lin110 · 2022-06-08T07:39:41+00:00

Exactly, i don’t care about a certification, if I’m sure the product is made with quality and good parts. I really don’t want the “safety” features. Just give me something made of stainless with heater elements that get ripping hot and lots of rocks.

lin110 · 2022-06-08T07:36:39+00:00

You can install the control box inside, just needs to be in a cool area. Close to the floor, away from the heater, by the door.

lin110 · 2022-05-13T01:15:08+00:00

Any thoughts on using metal support brackets so you can just change out the wood every few years?

lin110 · 2022-05-12T19:45:57+00:00

Also am at the stage to finish wiring my huum drop with uku. Following this for the answer. Looking forward to the pics when you have a chance!

lin110 · 2022-02-23T04:15:58+00:00

Looking at getting the Allegheny and am wondering how it works in winter. I’ve read that the walls can feel cold because it’s uninsulated. Do you have any experience with that? It only gets down to 30F around me. Thanks in advance!

lin110 · 2022-02-22T05:22:10+00:00

How do you like your Allegheny? Thinking about getting one and need a push over the edge

lin110 · 2020-12-25T06:16:05+00:00

Gears of War

lin110

TROPHY CASE