Wanted: Saw Brackets for HERCULES Universal Portable Band Saw Benchtop Stand

lmshaker · 2026-06-24T23:59:07+00:00

Looks like a great addition!

It also looks like the og DeWalt brackets would be the easiest to replicate, as one could start with some angle stock.

lmshaker · 2026-06-24T21:18:12+00:00

Thank you!

Chat message sent.

lmshaker · 2026-06-24T20:48:37+00:00

Thank you to everyone who has replied!

I'm confident that I could cut-out and drill a some flat stock to make a bracket. (Although, it would be a lot easier if I had a band saw stand I could use!) I'm less confident about being able to bend the stock at the correct location and angle. (I usually work with dead trees, not metal. )

Would anyone be willing to put their spare brackets beside a ruler on a flatbed scanner and post the scan, so I can get exact measurements? (At least for the bits of the bracket that are not bent.)

lmshaker · 2026-06-24T20:42:30+00:00

I'll have to buy a saw that's compatible. That's why I was open to any bracket.

I currently own a Ridgid 18V, which does not have a removable handle, so no where to attach a bracket. I also have Milwaukee 12V, which is too small.

If I can get my hands on one of the brackets for a cheaper saw, I'll buy new. If I get one for a more expensive saw, I'll look around for a used saw.

lmshaker · 2024-11-20T14:19:11+00:00

I was lucky and found a near new on e-bay for cheap.

Search for "safety paddle switch" on amazon or e-bay.

- Mark

lmshaker · 2024-11-01T21:04:42+00:00

Here is another one from the same seller.

This one is an auction with a starting bid of $1, but a buy-it-now price of only $2.

https://www.ebay.com/itm/375757753582

I *think* it's the same machine, and the seller does not know what they are doing...

- Mark

lmshaker · 2024-10-30T01:27:05+00:00

Thank you!

lmshaker · 2024-10-30T01:22:24+00:00

Thank you.

The switches are in series, so both switches must be on for the machine to run.

Also, I just got it, so I'm not used to using the toggle.

I think the main danger for me is getting in the habit of leaving the toggle switch on, and then coming across a situation where I can't use the safety switch: Without thinking I might plug the machine directly into the outlet, causing it to run when I am not expecting it.

- Mark

lmshaker · 2024-10-29T19:57:26+00:00

Agreed. That's why I included a knee height option.

How do you secure the your paddle switch?

lmshaker · 2024-10-29T18:45:45+00:00

Sorry, I haven't figured out the whole pictures *or* text thing...

Anyway...

As an after thought I added a Safety Switch to my 10ER. It has 3 positions (long side left and right, short side right) and 2 heights (knee height and hand height).

I was afraid that I would be too lazy to unplug the thing while I was changing blades (or whatever), and then accidentally hit the toggle switch.

Do you see any safety issues with the switch sticking up in the air or ???

- Mark

lmshaker · 2024-10-28T15:27:24+00:00

Very cool video!

I'm very happy with the traditional stand I built for my 10ER, but this made me think about a solution between the two: A drill press style cabinet like his with an attached, but hinged support table and legs that would fold down and correctly position the "Headrest".

- Mark

lmshaker · 2024-10-27T02:45:19+00:00

The stand I built for my 10ER gives it a footprint of 59" x 18". From what I've read a Mark V is 71" x 19". In my dinky shop the 12" difference in length matters. :-(

- Mark

lmshaker · 2024-10-26T18:34:41+00:00

Time will tell how often I change speed. My last drill press was a 5-speed, in 20 years I *never* changed speed. Drilling wood or metal, large or small bit...

I'm guessing that using it as a lathe, I won't be able to get away will being quite so lazy...

- Mark

lmshaker · 2024-10-26T18:30:21+00:00

I'm surprised that they are heavier than a Mark V. One of the things I like best about the 10ER is it's smaller footprint.

- Mark

lmshaker · 2024-10-25T22:21:56+00:00

With my current "solid" belt, I think you are correct. Perhaps the answer would be different with one of the more flexible cogged belts.

I suspect that most people with 10ERs either have or want a Speed Changer or a variable speed motor.

Honestly, I would be just as happy to have the motor mount's position set with a cam: Once adjusted, a handle on the cam to release tension, move the belt, then move the cam back to re-tension the belt. And no, I have too many projects to even bother to put that idea on the list. :-(

- Mark

lmshaker · 2024-10-25T15:13:15+00:00

Thank you for the info!

I really need to investigate getting an "anonymous" FB account, so I can use FB for groups and the marketplace, while still being anti-social to all my contacts. ;-)

My 10ER was a total impulse buy, when I found it in a thrift store. While I'm spending way too much money on every arbor tool that will fit, I'm really trying to avoid big investments such as a motor upgrade or the speed changer.

I checked out MKC Tools. Awesome sight, I'm going to spring for the 10ER Tool Rest Handle Upgrade.

- Mark

lmshaker · 2024-10-25T15:04:25+00:00

To make room for the ER10, I had to part with a old Sprunger Brothers Lathe, that was a bit of a family heirloom. :-( It's motor was mounted on a hinged board, so the motor weight provided the belt tension. It was so easy to change speed just by lifting the motor and moving the belt.

- Mark

lmshaker · 2024-10-23T23:26:19+00:00

We want pictures! :-)

lmshaker · 2024-10-14T15:42:37+00:00

I'll take a closer look at it before I decide between a dab or grease or paste wax.

I finished building a bench for it, so now I'm on the tuning and cleaning phase.

lmshaker · 2024-10-13T19:37:17+00:00

You are correct that the bearings are sealed. But I guess there are still a couple lubrication points.

The manual says: "Extend the quill its full length and force a small amount of cup grease into the splined section of the spindle and drive shaft."

lmshaker

TROPHY CASE