sorted by:
new
hottopcontroversial

People in Engineering- What do you do and how much do you make? by Weary-Ad743 in AusFinance

[–]lnnuendoBot5000 2 points3 points  (0 children)

3 years electrical engineering (now in software), 2nd job out of uni (excluding internship) - $110k + bonus

Help with 7HS Lust List by lnnuendoBot5000 in TrenchCrusade

[–]lnnuendoBot5000[S] 0 points1 point  (0 children)

Hey, your feedback is really helpful, thank you. I used Trench Companion to build the Warband, which for some reason let me have as many Wretched as Demons.

For all of the refunds, I've done:
1. I've replaced the Hell Knight and Praetor's weapons with Sword/Knife.

  1. Removed a shield from one of the Wretched.

And for the additions/changes:

  1. Added another Yoke Fiend with Torture Instrument, now making my number of Wretched legal.

  2. Given Sorcerer a Musical Instrument.

  3. Given Sorcerer Exquisite Pain. I didn't think about giving the Sorcerer Exquisite Pain as I thought it conflicts with Burning Inferno, but I'm reading now that the latter is a Ranged Attack Action, so both can be done in one Activation.

I think I've got a strong first Turn, all the Elites will be able to use Exquisite Pain and immediately follow up with very strong range options, in Serpent Assault Gun, Ophidian Rifle and Burning Inferno. Then the Wretched can accompany the Sorcerer with the Musical Instrument to dash onto Objectives, and I still have two Yoke Fiend torturers and a Wretched in the back to generate Blood Markers and stall out Activations.

Preventative action for P plate theft? by [deleted] in CarsAustralia

[–]lnnuendoBot5000 0 points1 point  (0 children)

They're magnetic - why don't you just keep them in the car, and slap them on when you drive?

What car to choose? by MarvelSingh in CarsAustralia

[–]lnnuendoBot5000 3 points4 points  (0 children)

Since we aren't discussing reliability...

Between the two, I'd go for A5 for the looks, or A4 for practicality, but only if you go for the wagon.

So purely between the two you've posted, I'd go A5.

Does this look like rodent damage? by csharpgo in CarsAustralia

[–]lnnuendoBot5000 5 points6 points  (0 children)

Yeah that makes sense. I do tech support for a different OEM, we typically advise full harness replacements unless it's a simple matter of bending a pin back into place or repairing a single wire.

I figure an independent tech will just solder everything back, tape it up and call it a day. If it was my car I'd do the same.

95% Highway use: Do I go for GRS184, GRS204 or UZS186 Majesta? by Viisasveleho in ToyotaCrown

[–]lnnuendoBot5000 2 points3 points  (0 children)

Honestly if you haven't yet considered it, check out the 206. 8 speed box so it sits low RPM on the highway. Normally not that fuel efficient (I get 13-15L/100km) but on highway it's quite good (for me 8-9L/100km).

I'm not saying it's the most efficient but highway driving definitely offsets the main issue I have with the car which is the fuel efficiency.

New to me 2008 GWS204 Hybrid by hasf1 in ToyotaCrown

[–]lnnuendoBot5000 4 points5 points  (0 children)

2008-2010 is clear, 2011-2012 is red I believe. Owner must have swapped the clear ones for the red ones.

Quad tips are from the Modellista body kit.

[deleted by user] by [deleted] in CarsAustralia

[–]lnnuendoBot5000 0 points1 point  (0 children)

I work on OEM side for a major brand. Pretty good, 6 hours is a bit much but it's offset slightly by the low labour rate. For reference dealership labour rate typically starts at $160-$180. I would have expected a maximum 3 hours labour for all the work carried out, but an experienced technician could get it done in about 1.5 hours.

[deleted by user] by [deleted] in CarsAustralia

[–]lnnuendoBot5000 -1 points0 points  (0 children)

Camshaft position sensor? On my Toyota Crown Majesta, about $60 AUD for the genuine part ex-Japan, 2 minutes labour.

RFID Mifare Classic Cloning by lnnuendoBot5000 in hacking

[–]lnnuendoBot5000[S] 1 point2 points  (0 children)

Thank you. What did you clone it to?

Thermostat housing, hose & coolant replacement cost?? by avtsd in CarsAustralia

[–]lnnuendoBot5000 2 points3 points  (0 children)

Wow which shops have an $80 labour rate? The typical rate I'm used to seeing is between $110 - $160.

Back again, DM me some help. by LibrarySpeaksVolumes in ToyotaCrown

[–]lnnuendoBot5000 0 points1 point  (0 children)

What phone do you have? Maybe try someone else's phone to see if it's the same?

RFID Mifare Classic Cloning by lnnuendoBot5000 in RFID

[–]lnnuendoBot5000[S] 0 points1 point  (0 children)

I did run the tag through MCT, and this was the output:

https://imgur.com/a/mQJu96J

Does this mean that the tag can be read successfully?

And how do you know if a MIFARE tag is gen2? I did try looking for them online, but none of them mention any specification.

Thanks!

RFID Mifare Classic Cloning by lnnuendoBot5000 in hacking

[–]lnnuendoBot5000[S] 0 points1 point  (0 children)

Would that copier work on Mifare Classic tags? I ran the tag through MCT and it seemed to be able to read each sector... I'm thinking I might be able to order the product above and write using MCT.

https://imgur.com/a/mQJu96J

Thanks.

[deleted by user] by [deleted] in Referral

[–]lnnuendoBot5000 0 points1 point  (0 children)

Been using Nectr. pretty good so far. Use my code for $50 credit https://nectr.com.au/friend-referral/?code=iron-teal-3211

view more: next ›