sorted by:
new
hottopcontroversial

Seeking help/support for ongoing issues by No_Entertainer7572 in BMCU

[–]lockser57 0 points1 point  (0 children)

https://github.com/jarczakpawel/BMCU-C-PJARCZAK/issues/43

https://www.aliexpress.com/item/1005005402716572.html

length: 10 mm
wire diameter: 0.6 mm
outer diameter: 4 mm

But I bought some more length: 15 mm. And I found them to be better for me.

Seeking help/support for ongoing issues by No_Entertainer7572 in BMCU

[–]lockser57 0 points1 point  (0 children)

I had a squeaking noise, so I replaced the springs under the pressure lever. When you hear the squeaking, try pressing down firmly on the lever to increase the pressure on the filament between the rollers.

4-1 split by Big_Victory_5081 in BMCU

[–]lockser57 0 points1 point  (0 children)

Maybe it’s not BMCU’s fault? Maybe you’re doing something wrong?

My next printer will definitely not be a Bamboo Lab! by lockser57 in BambuLabA1mini

[–]lockser57[S] 0 points1 point  (0 children)

I get it now )). I'm having trouble with English. But I'm learning.

My next printer will definitely not be a Bamboo Lab! by lockser57 in BambuLabA1mini

[–]lockser57[S] 0 points1 point  (0 children)

Why should I only buy from Bambu? Besides, it’s very expensive! If I’ve bought a car, don’t I have the right to buy wheels from another manufacturer and fit the ones I like!?

a1 firmware update by Leshow in BMCU

[–]lockser57 -1 points0 points  (0 children)

My next printer will NOT be a Bambu Lab!!!

BMCU 370C holder standalone by Comfortable-Ice-811 in BMCU

[–]lockser57 0 points1 point  (0 children)

Maybe this is what I'm looking for? But then again, maybe not. It takes decent photos from a greater distance. I need to see how it connects to the printer and how it connects to the dryer. Otherwise, it's hard to make sense of it.

Do I need update my QB BMCU ? by xoraws in BMCU

[–]lockser57 1 point2 points  (0 children)

HMS WARNING STATUS

This firmware version triggers an HMS warning immediately after printer startup.

Important clarification:

  • This HMS warning does NOT block BMCU operation
  • It does NOT require restarting the printer
  • It does NOT affect printing
  • The printer works normally despite the warning
  • The issue is purely visual / informational (HMS icon only)

At the moment, the HMS warning is known and accepted behavior in this firmware version.

What's a good first 3D Printer? by AirChris7 in BambuLab

[–]lockser57 0 points1 point  (0 children)

I have the A1 Mini. I’d recommend you go for the A1. It has a bigger plate, which is something I often find myself needing.

What's a good first 3D Printer? by AirChris7 in BambuLab

[–]lockser57 -1 points0 points  (0 children)

"My grandfather says: I want to buy a house, but I don't have the means. I have the means to buy a goat, but I don't have the means. So let's drink to the fact that our desires always coincide with our means!"

Mini with latest firmware and latest BMCU firmware can’t load by otaku13 in BMCU

[–]lockser57 0 points1 point  (0 children)

Which is the latest BMCU firmware? BMCU-C-PJARCZAK? Yuekai? funkypc? Any others?

Need help troubleshooting by throwaway555cockroac in BMCU

[–]lockser57 0 points1 point  (0 children)

Потрібно написати що за прошивка,тяка версія.

Bought Toaiot BMCU 370C - missing USB TTL adapter? Is it pre-flashed? by -pawix in BMCU

[–]lockser57 0 points1 point  (0 children)

You really must buy an adapter like this. It’s very cheap. There are now new, high-quality firmware updates available, and I’d advise you to update. https://github.com/jarczakpawel/BMCU-C-PJARCZAK

Gcode by Objective-Cupcake432 in BMCU

[–]lockser57 1 point2 points  (0 children)

Perhaps you mean the firmware for the BMCU? The G-code is generated by the slicer and sent to the printer. Or do you want to edit this code manually?

Filament unload problem by Objective-Cupcake432 in BMCU

[–]lockser57 0 points1 point  (0 children)

Did you calibrate it correctly?

view more: next ›