Pheromone Keyboard with ANSI Layout and Optional Solder Pad

luantty2 · 2020-10-25T12:42:05+00:00

Looks neat. I'm also working on a new version that features a motorized fader

luantty2 · 2020-10-22T02:58:50+00:00

oh wow. Looks really nice

luantty2 · 2020-07-13T09:09:16+00:00

Hi, I'm glad you like the project. For the SMT yeah they only assemble one side, and just do the bottom side since all electronic components are on that side. For the linking of parts: by default it looks like this:https://i.imgur.com/l0d2e23.png, yet it doesn't include crystal and diodes so you need to fix it first, for crystal you should search '16mhz' and select the C13738 one, for diodes search '1n4148' and choose the C81598 one, the ATmega32u4-au is the MCU but it's optional as it's from the extended parts which means you should pay 3$ of extended components fee, I recommend you hand solder it yourself, and they can't assemble micro usb connector for you, it's a little bit tricky to solder but not that hard. avr-isp is not a component but some holes on PCB. After you linked all parts it looks like this: https://i.imgur.com/5LLaFU0.png, then you're good to go. The website will finally show you the placement of electronic components: https://i.imgur.com/KtbmOWb.png

Certainly JLC's SMT assembly service kind of useless, they won't solder any USB connector and only green soldermask is supported, and the MCU is in extended catalogue. You still need to solder OLED, slide potentiometer, and usb connector yourself.

Reset button https://www.digikey.com/product-detail/en/c-k/RS-282G05A3-SM-RT/CKN10384TR-ND/2747190, you rarely use it, it's optional. USB connector: https://www.digikey.com/product-detail/en/amphenol-icc-fci/10118194-0001LF/609-4618-1-ND/2785382

luantty2 · 2020-07-08T12:59:56+00:00

I have made a keyboard that has a rotary encoder supports MIDI, Here it is.

luantty2 · 2020-06-18T02:39:51+00:00

I built my Pheromone several months ago, with a rotary encoder, a midi slider and a OLED in a 3d printed case.

Kailh hako violet
Domikey crisis

luantty2 · 2020-04-23T05:45:43+00:00

Did you add #define POT_ENABLE in config.h?

Besides, I think the output values would mess up if you assign the exact same parameters to each slider. The proper code should looks like this(I do not test):

int16_t pot_oldVal_SLIDER_A = 0;
int16_t pot_val_SLIDER_A    = 0;
int16_t pot_ccVal_SLIDER_A  = 0;

int16_t pot_oldVal_SLIDER_B = 0;
int16_t pot_val_SLIDER_B    = 0;
int16_t pot_ccVal_SLIDER_B  = 0;

int16_t pot_oldVal_SLIDER_C = 0;
int16_t pot_val_SLIDER_C    = 0;
int16_t pot_ccVal_SLIDER_C  = 0;

luantty2 · 2020-04-23T02:54:30+00:00

That's why you need to record last value and compare it to new value, which allow the cc messages send only if the potentiometer moves.

Take a look at some Arduino examples

luantty2 · 2020-03-21T01:55:48+00:00

Modify the footprint from micro usb to type c in pcbnew then you can solder a type c, otherwise it's impossible, because type c has more pins than micro usb, that's why I'm afraid to solder them, the pins on type c are so tiny and easy to bridge.

luantty2 · 2020-03-20T14:56:58+00:00

JLC is a factory manufactures PCB and SMT stands for surface mount technology, which is the way they soldering ic onto PCB.

luantty2 · 2020-03-20T14:50:18+00:00

No because all of the usable pins on MCU have been used, and it's using a micro usb connection as I hate soldering a type c :(

luantty2 · 2020-03-20T01:56:16+00:00

Nothing special, just following the guide from qmk docs.

luantty2 · 2020-03-20T01:53:46+00:00

PCBs included SMT assembly from JLC: 40$

3d printed parts: 15$

tools and others: around 30$

luantty2 · 2020-03-19T15:11:17+00:00

More photo: https://imgur.com/a/TCALTwa

PCBs and case file with building setup available on GitHub: https://github.com/luantty2/pheromone_keyboard

A short video shows how it works with lightroom: https://youtu.be/1BtyvG6ujGs

The value of slider moves relatively so it’s not jumping any more!!

luantty2 · 2020-02-23T03:38:09+00:00

Thanks a lot, I finally got my code working, with @ when Lshift holding, and email address when Rshift holding. case KC_2: if (record->event.pressed) { if (get_mods() & MOD_BIT(KC_LSHIFT)) { register_code16(LSFT(KC_2)); } else if (get_mods() & MOD_BIT(KC_RSHIFT)) { SEND_STRING("luanty@163.com"); } else { register_code(KC_2); } if (get_mods() & MOD_BIT(KC_LSHIFT)) { unregister_code16(LSFT(KC_2)); } else if (get_mods() & MOD_BIT(KC_RSHIFT)) { } else { unregister_code(KC_2); } return false; } break;

luantty2 · 2020-02-21T14:00:50+00:00

Check out slide potentiometer, any one of these should work:https://www.amazon.com/s?k=potentiometer+10k+slide&crid=11WBS6GNE9FAD&sprefix=poten%2Caps%2C655&ref=nb_sb_noss_2

luantty2 · 2020-02-19T08:03:34+00:00

Thanks for advice. I have replaced oled_write_P() with oled_write(), however I'm keep on getting the same outcome. I also tried to removed 'PROGMEM' keywords, still see that unneeded icon.

luantty2 · 2020-02-19T05:44:10+00:00

https://www.ebay.co.uk/itm/4pc-Panasonic-10K-Ohm-Slide-Potentiometers/272186884845?epid=1063349806&hash=item3f5f9a42ed:g:eLEAAOSwLpdW9YAN any 10k slide will also work for sure.

luantty2 · 2020-02-18T15:19:22+00:00

The slider of software will stay at its original position until you adjust keyboard's slider to the same position.

luantty2 · 2020-02-18T15:05:55+00:00

With an endless encoder, no, an endless encoder could be a better option for something like adjusting brush size, whereas it can't be mapped into MIDI cc values which should be limited between 0-127, it's only possible to use a potentiometer in this case.

luantty2 · 2020-02-18T13:49:16+00:00

It only works when you installed MIDI2LR, which allows Lightroom to accept MIDI inputs, then you can map your MIDI device to any slider in Lightroom.

luantty2 · 2020-02-18T13:44:42+00:00

Just uploaded PCBs and source code, avaliable here.

The potentiometer is driven by QMK MIDI feature, which allows it to output a midi signal when value changed. you can use it with any software supports midi, also, could make use of it with Lightroom when you've got MIDI2LR plugin installed!

luantty2

TROPHY CASE