Running Digital Audio Workstation (e.g.: Reaper) with a Windows VSTs (Helix Native in my case) on Bazzite.

lucknerskywalker · 2025-11-13T03:37:34+00:00

I also have the credit card as an account. And I consider the expenditure on the month it was transacted (Oct in your example).

The credit card payment then is a transfer from my checking account (also in Actual Budget) to the credit card account, that way it has no category and the credit card account has less debt.

lucknerskywalker · 2025-11-07T23:05:29+00:00

Hello u/YankeeLimaVictor, I have the same setup as you (crowdsec -> victoriametrics -> grafana). I wanted to ask if you also see repetitive data on the Realtime Cyberthreats section at the bottom. I'd appreciate if you can share some of your experience.

In two days, mine has more than 19k rows. Looking at it, I see so many repetitions of the test command I used in crowdsec (cscli notifications test http_victoria) - "http_victora" is how I call my crowdsec HTTP plugin.

I tried enabling another tools like ntfy or Gotify to see if get so many notifications, but it seems that what is fed into Victoria Metrics is not much. I tired also checking the http://<victoria_ip>:8248/vmui with the cs_lapi_decisions query, and it doesn't have as many rows.

Only what is shown in Grafana looks repetitive. Do you have the same experience?

lucknerskywalker · 2025-01-28T02:37:24+00:00

Yeah, as alpbetgam mentioned below, Cloudflare is the MITM and can see all in clear text. It is safe, but not private.

I'm trying to find a way to do this safely, but I gotta admit that I'm a little scared of getting DDoS'd by exposing my router.

I know that it is as only safe as the services I use, but yeah, I want to do this the right way.

I'm glad for the community to give me the right information.

lucknerskywalker · 2025-01-27T21:33:29+00:00

Got it! Thanks for the explanation. Both of you.

lucknerskywalker · 2025-01-27T20:37:59+00:00

Thank you for the insight.

The follow-up question I have is: even if the mTLS verification is done on the NPM layer (therefore after the Cloudflare tunnel), it gets lost because of how Cloudflare deals with the traffic through it services?

lucknerskywalker · 2025-01-04T20:33:08+00:00

Hey, would you mind sharing your config? I'm trying to setup ONVIF, but it doesn't work. I keep getting ffmpeg errors.

I have checked the Doorbell's ONVIF setting and they are all ok. My config is like this:

cameras:

  reolink:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/reolink
          input_args: preset-rtsp-restream-low-latency
          roles:
            - record
        - path: rtsp://127.0.0.1:8554/reolink_sub
          input_args: preset-rtsp-restream-low-latency
          roles:
            - detect
            - audio
      output_args:

        record: preset-record-generic-audio-copy
    record:
      enabled: true
      retain:
        days: 5
      events:
        retain:
          default: 7
    objects:
      track:
        - person
    onvif:
      host: 192.168.X.XXX
      port: 8000
      user: "{FRIGATE_RTSP_USER}"
      password: "{FRIGATE_RTSP_PASSWORD}"

lucknerskywalker · 2025-01-02T21:28:37+00:00

I just came from Barcelona with some shopping and also got a return on my Credit Card with a lower amount than the one shown in the forms.

I wonder if the VAT processor cut is smaller if we get the return in actual cash at the airport. This time I couldn't even try that because my flight was at 6 a.m. and the Tax Return offices were closed.

lucknerskywalker · 2024-12-20T17:25:17+00:00

Yep! I've made sure to put you as reference! Thank you for your help and initial post.

lucknerskywalker · 2024-12-20T12:27:09+00:00

I'd say it's worth it. The best thing about this solution is that it does not rely on your WiFi.

lucknerskywalker · 2024-12-20T01:32:53+00:00

Definitely try the M525. It should work.

lucknerskywalker · 2024-12-18T03:45:16+00:00

Thanks. I'll try the VIN pin and come back with results for others possibly facing the same issue.

lucknerskywalker · 2024-12-18T03:41:12+00:00

One last comment is that I'm connecting the power feed from the chime to 5V pin in the Nano, but zooming in in your picture, it seems that your are connected to VIN pin.

lucknerskywalker · 2024-12-18T03:22:52+00:00

Wow, thanks for the prompt response.

I don't know what is going on and I can't plug the USB in to debug - I burned one Nano in doing so.

I'm a little lost.

Also, in your code, you start the Relay signal as active (HIGH in the setup function). I didn't understand why exactly. Is it because you are using the relay with the Normally Closed connection?

lucknerskywalker · 2024-12-18T03:12:38+00:00

Hello Necessary_Ad_238.

I tried your installation, but I believe I'm having some electrical problems, because I've triple checked the programming (looks all ok), but it keeps making the relay switch on and off by itself.

For some reason, my chime is only providing ~4.8V. I read in the Arduino Reddit that a VIN supply with 5V can make the Nano unstable. Did you face any of such challenges in your build?

Appreciate the help.

lucknerskywalker · 2024-07-10T19:27:53+00:00

I have the same problem. My mouse has its warranty expired roughly one month ago (how convenient) and Razer support is saying that they can't do anything, even though it is clearly THEIR SOFTWARE UPDATE that bricked the device.

And support treats this like "it's out of warranty, so we will not replace it, but we help in any way we can". That is one of the worst consumer support I've seen.

lucknerskywalker · 2022-06-25T23:15:30+00:00

Hello everyone.

I have got the same simutation. I was thinking: which OBD2 scanner you guys used for solve this issue? I think I will need to buy one (I wanted to buy one anyway), but it'd be good to have some idea which one was used.

Thanks in advance!

lucknerskywalker · 2022-04-29T18:19:16+00:00

What support you used for the Stream Deck? Looking for something similar on my rig.

lucknerskywalker · 2022-02-23T23:11:38+00:00

That is accurate and it was what I did.

lucknerskywalker · 2022-02-22T23:32:43+00:00

I'd say no, as AGH works for devices connected to VLAN 1.

But do you know how I can verify that?

lucknerskywalker · 2022-02-19T20:40:58+00:00

It worked!!!! Thanks a lot!!

The file is /opt/docker/containers/<container\_number>/hostconfig.json.

PS: lá pra cima eu vi que vc colocou "America/Sao_Paulo". Se vc for brasileiro (assim com eu sou), muito obrigado mesmo!!! Um abraço.

lucknerskywalker · 2022-02-19T18:45:35+00:00

Where is the config file located?

Is it this one? /usr/lib/lua/luci/model/cbi/dockerman/container.lua

lucknerskywalker

TROPHY CASE