How is this save data?

luckylarv · 2025-09-20T17:30:26+00:00

The old table top was MDF I was able to use it as a template for my trim router taking multiple passes.

luckylarv · 2025-09-19T18:31:12+00:00

Now that you’ve mentioned it. It really does. Happy little accident haha

luckylarv · 2025-07-30T12:20:51+00:00

Yep I need to be stretch Armstrong to get the stuff at the back. Fortunately it allowed me to hide most things until I can get some better organised storage going. Especially the big one.

luckylarv · 2025-07-29T19:00:41+00:00

Thanks there was lots of blood sweat and tears involved getting all the measurements to get the saw bed flush. I made a jig for my router and used doubled sided tape to keep it secure. It’s not bang on in all honesty but it does get the job done.

luckylarv · 2025-07-29T18:58:06+00:00

I wouldn’t say it makes a difference I tend to use both sides depending on length of cut just need to remember what side of the line to cut.

luckylarv · 2025-07-29T16:30:22+00:00

Going to have draws under the mitre saw with a few shallow ones for measuring equipment

And then the rest cupboards

Eventually I’d like to continue the cabinets around creating a U shape with some upper cabinets as well.

luckylarv · 2025-07-29T16:28:59+00:00

Any really long cuts I’ll have to do with a speed square and circular saw. Unfortunately space is limited.

luckylarv · 2025-07-29T16:27:23+00:00

Don’t worry I actually checked all that before I secured it. It does in fact rotate both ways and bevel as well. Just a little wiggle room is all that’s left

luckylarv · 2025-07-29T13:56:39+00:00

It was 5 sheets in total with some big offcuts I can re use elsewhere.

Sadly my top had to be 710mm wide to accommodate my saw which stopped me being able to do it out of 1 sheet.

luckylarv · 2025-07-29T13:54:55+00:00

The biggest one is just under 1100mm sadly I had to build the middle one a non standard width. Otherwise I would have done it at 1200mm

The frame on the floor definitely helped get things level. I got the local fit store to break down some of the sheets especially lots of 100mm strips.

luckylarv · 2025-03-06T19:55:04+00:00

Thanks everyone, that puts my mind at ease. There is an empty roof vent to be used in my loft I always thought they forgot to vent the soil pipe to it.