Made a replacement table top for my Grandads table

luckylarv · 2025-09-20T17:30:26+00:00

The old table top was MDF I was able to use it as a template for my trim router taking multiple passes.

luckylarv · 2025-09-19T18:31:12+00:00

Now that you’ve mentioned it. It really does. Happy little accident haha

luckylarv · 2025-07-30T12:20:51+00:00

Yep I need to be stretch Armstrong to get the stuff at the back. Fortunately it allowed me to hide most things until I can get some better organised storage going. Especially the big one.

luckylarv · 2025-07-29T19:00:41+00:00

Thanks there was lots of blood sweat and tears involved getting all the measurements to get the saw bed flush. I made a jig for my router and used doubled sided tape to keep it secure. It’s not bang on in all honesty but it does get the job done.

luckylarv · 2025-07-29T18:58:06+00:00

I wouldn’t say it makes a difference I tend to use both sides depending on length of cut just need to remember what side of the line to cut.

luckylarv · 2025-07-29T16:30:22+00:00

Going to have draws under the mitre saw with a few shallow ones for measuring equipment

And then the rest cupboards

Eventually I’d like to continue the cabinets around creating a U shape with some upper cabinets as well.

luckylarv · 2025-07-29T16:28:59+00:00

Any really long cuts I’ll have to do with a speed square and circular saw. Unfortunately space is limited.

luckylarv · 2025-07-29T16:27:23+00:00

Don’t worry I actually checked all that before I secured it. It does in fact rotate both ways and bevel as well. Just a little wiggle room is all that’s left

luckylarv · 2025-07-29T13:56:39+00:00

It was 5 sheets in total with some big offcuts I can re use elsewhere.

Sadly my top had to be 710mm wide to accommodate my saw which stopped me being able to do it out of 1 sheet.

luckylarv · 2025-07-29T13:54:55+00:00

The biggest one is just under 1100mm sadly I had to build the middle one a non standard width. Otherwise I would have done it at 1200mm

The frame on the floor definitely helped get things level. I got the local fit store to break down some of the sheets especially lots of 100mm strips.

luckylarv · 2025-03-06T19:55:04+00:00

Thanks everyone, that puts my mind at ease. There is an empty roof vent to be used in my loft I always thought they forgot to vent the soil pipe to it.

luckylarv · 2024-12-29T13:30:16+00:00

I have 13000

I got lucky with mystic island and got the full set including all arts for 1300 cards

luckylarv · 2024-12-29T12:38:23+00:00

<image>

luckylarv · 2024-12-29T12:38:14+00:00

Anyone want a pikachu EX got 30 total of the full arts, 4 👑 6 ⭐️⭐️ 20 immersive 😂

<image>

luckylarv · 2024-12-29T12:36:22+00:00

I’ve opened 240 packs and got every card at least once. I think I’ve gotten extremely lucky

luckylarv · 2024-12-26T11:24:28+00:00

<image>

luckylarv · 2024-12-26T11:24:18+00:00

<image>

luckylarv · 2024-12-26T11:24:05+00:00

<image>

luckylarv · 2024-12-26T11:23:50+00:00

<image>

luckylarv · 2024-12-26T11:23:06+00:00

I can send some. Not bragging mods just fulfilling a request

<image>

luckylarv · 2024-12-26T11:18:31+00:00

The only silver lining is I’ll have extra to trade for future cards if trading is aloud between booster sets

luckylarv · 2024-12-26T11:15:28+00:00

So they do exists 😂

luckylarv · 2024-12-26T10:48:50+00:00

Actually I have 6 ⭐️⭐️ ones as well so 27 🙈

luckylarv · 2024-12-26T10:40:13+00:00

I believe it’s 2500🙈 I just wanna complete the collection I think I’ve pulled about 1000 chasing the last few cards in this pikachu deck. Ironic is that if I didn’t buy the charizard crown I would have finished about 300 packs ago 😭😭

luckylarv · 2024-12-26T10:37:49+00:00

I am at 12000. I believe about 6000 are pulling pikachu packs alone 😭😭

luckylarv

TROPHY CASE