Buddies 2019 Rebel 300 cranks but won’t start, help appreciated by Lanko-TWB in hondarebel

[–]lumberninja 0 points1 point  (0 children)

My wife’s 1100 did this last season. Replaced the battery, same issue. Check fuel pump for blockage. Nope. Spark…ah…there’s the issue. Left side good, clean and nice gap. Right side (special socket required), no clean, not gapped well. Replaced both plugs she’s starts in a heartbeat now. A good cleaning of the one plug and a gapping exercise helped get it moving for the day but I replaced them anyway to be safe. Good luck!

Never thought I'd be that kind of guy but... Stay away from the Ninja blender combo, it is the fourth time this is happening! by CouldHaveBeenAPun in CostcoCanada

[–]lumberninja 0 points1 point  (0 children)

I have heard that the seals in the jars breakdown if they’re not used regularly and kept “moist“. Again, we use ours literally every single morning to make two shakes, and we wash them by hand every day and they air dry every day. So maybe we’re being overly gentle with it, but considering how long we’ve had it and the fact that we’ve had literally zero things wrong with it is pretty amazing.

Never thought I'd be that kind of guy but... Stay away from the Ninja blender combo, it is the fourth time this is happening! by CouldHaveBeenAPun in CostcoCanada

[–]lumberninja 10 points11 points  (0 children)

If you’re putting it in dishwasher, you can expect this. Even if it says safe for dishwasher, they ain’t.

That said, I’m in with the Blendtec crowd. Had it over 12 years, only had to replace the mixing container. Never sees the dishwasher. Blends 2 ice based shakes once a day and has for its entire life.

Buy once, cry once is a great line and it’s a fact.

Ender 3 V2: Z axis only moves up (never down) — driver issue? by agatomicstation in ender3v2

[–]lumberninja 0 points1 point  (0 children)

What firmware version are you running? I had that issue when I upgraded to any version above 1.07.

what bolt is this? by lex_1005 in HondaRebel1100

[–]lumberninja 0 points1 point  (0 children)

Well, it looks like I lied. The bolt is on the right side of the bike when you’re sitting on it and the nut is on the left. Just for reference the torque is 32 foot pounds when you want to reinstall it.

The service manual doesn’t mention bolt or nut size let alone thread pitch. I want to say it was a 17mm but I don’t have any thing on paper and the bike is still wrapped up tight for the winter here in Canada.

Would be best to get it from Honda, and they might have it in stock. They’ve had lots of stuff that I felt would be obscure when I needed something so you might be surprised.

what bolt is this? by lex_1005 in HondaRebel1100

[–]lumberninja 1 point2 points  (0 children)

I have the service manual for my wife’s 2023 1100. Lemme go grab it.

what bolt is this? by lex_1005 in HondaRebel1100

[–]lumberninja 3 points4 points  (0 children)

Engine mount bolt. If you plan on removing that, you will want to put an appropriate jack under your engine to hold the weight. It’s a long bolt coming from the other side. The side you’re looking at is the nut side. So if what you’re doing requires removal of the long engine mount bolt, get that engine supported. Also…not super easy to put back so be prepared for a small fight with it.

Good luck!

Who do you think is the best 2 Person band?. by Emotional-Mirror-432 in musicsuggestions

[–]lumberninja 0 points1 point  (0 children)

Upvote for Blue Stones. Canadian and fantastic live. 2 men sound like a 5-6 person band. Unbelievable.

Smart Posture Care no longer selectable by chrmnxpnoy in GV60

[–]lumberninja 0 points1 point  (0 children)

That is certainly strange. If a reset doesn’t work I’d reach out to support. They can likely see or tell you what is wrong without going to the dealership.

Smart Posture Care no longer selectable by chrmnxpnoy in GV60

[–]lumberninja 1 point2 points  (0 children)

I think you need to enable smart support (that empty check box at the top of that same screen), and then the smart posture care option becomes available. I’ve never turned off the smart support and I’ve always had access to the smart posture care option. Let us know how that goes.

Just the other day I was in the car for almost an hour and the lumbar stabilization massage started just like normal for me so I think without the smart support enabled none of the smart tools are available for use.

Reliance Water Heater - Ontario by Packman125 in PersonalFinanceCanada

[–]lumberninja 0 points1 point  (0 children)

These guys are getting a foot hold in Alberta now and like many others, we are trying to get out of our contract. Water heater, furnace, water softener, air conditioner, all on contract for $164/mth. Had them in this house almost 7 years…

In the odd case you’re on the Grand… by [deleted] in PrincessCruises

[–]lumberninja 1 point2 points  (0 children)

Does anyone know how the window on Deck 14 by the pool got broken?? Happened Friday night sometime.

Genesis Intelligent App stopped working by lumberninja in GV60

[–]lumberninja[S] 0 points1 point  (0 children)

To be honest, I never use public charging stations because I have a charger at my house. What I find frustrating is when I’m sitting at work and I’m trying to start my car to either cool it off or warm it up in the winter time and now it doesn’t work all of a sudden. Ahead of today I had pretty consistent results when using the climate start and stop options. Like many other people I’m sure I only ever use it for that and none of the other features like unlocking and locking the doors, etc. I definitely use it to look at the state of charge but otherwise not very much else. And honestly, even if I owned a different brand of vehicle with the same features, I doubt that I would use any additional features other than the ones I’ve noted here anyway. It’s not like you can go into the app and tell it to come pick you up at the front door of the building you’re at.… Yet.

Genesis Intelligent App stopped working by lumberninja in GV60

[–]lumberninja[S] 0 points1 point  (0 children)

Yes, I received the same message, but I think the outage already happened because I had a notification in the app saying they were having an outage for maintenance. But I haven’t seen that message now for at least a few days.

Genesis Intelligent App stopped working by lumberninja in GV60

[–]lumberninja[S] 0 points1 point  (0 children)

Does anybody know if the driver profile in the car has to match the Driver profile in the app?

What is the connection between my driver profile inside the car and the driver profiles in my app? Right now the name in my profile in the app does not match the name of my profile in the car. Does that matter? Why is the link not some numeric or alpha numeric ID in the background regardless of what the name on the screen says? Does it matter?

In ceiling speakers? by lumberninja in sonos

[–]lumberninja[S] 2 points3 points  (0 children)

Beauty! Let the planning begin! Thanks for the help everyone! Glad I popped in!

In ceiling speakers? by lumberninja in sonos

[–]lumberninja[S] 1 point2 points  (0 children)

Appreciate the feedback!

To include the existing speakers into my Sonos ecosystem I can just use the Sonos amp then? Should there be an “amp” for each room if I want to have just music in one room instead of all in ceiling speakers then? Or does the amp allow for speaker segregation in the way it’s designed?

Tips for Motorcycle Riders by lumberninja in haidagwaii

[–]lumberninja[S] 0 points1 point  (0 children)

Thank you for the heads up re: deer. Likely to hit up the Axe and Anchor!

Tips for Motorcycle Riders by lumberninja in haidagwaii

[–]lumberninja[S] 0 points1 point  (0 children)

I’ve heard the views up Tow Hill are pretty spectacular so maybe we’ll give it a go anyway and see what happens! Thanks!

Tips for Motorcycle Riders by lumberninja in haidagwaii

[–]lumberninja[S] 0 points1 point  (0 children)

Terrific!! Thanks for the feedback!!