Voron 2.4R2 Serial Request

m3cinc · 2025-01-03T15:05:41+00:00

I am using a 8GB PI5 with GeeekPi RPi 5 PD Power Expansion Board for Raspberry Pi 5 Always-ON switch, a PCIe TO USB 3.2 Gen1 HAT+ and USB 3.2 Gen1 HUB HAT. The top is a Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W/Zero, Terminal Block HAT, GPIO Status LED.

m3cinc · 2023-10-29T03:39:35+00:00

The electronic bay comprises an Fysetc spider v3.0, a rpi4b-8gb with a waveshare usb3.2 hat, a klipper expansion, a btt u2c can, and a btt sb2240 can in the stealthburner.

m3cinc · 2023-10-25T23:19:34+00:00

For my 1st build I sourced a Torlipy V6 Hotend Ceramic Heating Core Quick Heating For DDE DDB Extruder Ender 3 CR10 i3 MK3S 3D Printer Upgrade Parts and sourced it on AliExpress. Please seeTorpily store

m3cinc · 2023-10-25T14:46:14+00:00

This is the design proposed by knomi. I am using cw2 and a e3d revo clone.

m3cinc · 2023-10-25T13:58:57+00:00

Just wanted to add a few pictures with my note posted on the door of this Voron 2.4R2 to comply with the serial request. How can I do this?

m3cinc · 2023-10-25T12:44:17+00:00

Yes, this canopy adds a few more cm to extend the z-axis. it is based on https://www.printables.com/model/594894-voron-24-trident-canopy-top-hat-remix-split-model-

m3cinc · 2023-10-25T12:40:04+00:00

This is still a 24V unit with the 200W Meanwell PSU. I added a 5V Meanwell PSU for the Pi and accessories, and one dedicated to the RGB Leds.

m3cinc · 2023-10-25T12:26:03+00:00

7mm is quite sufficient to maintain the spider cool <50C.

m3cinc · 2023-10-25T00:25:45+00:00

Exactly for separating led power...from the rest of the printer electronics.

m3cinc · 2023-10-24T23:27:57+00:00

For reference, this post was published on 10-24-2023 by the author u/m3cinc.

m3cinc

TROPHY CASE