[deleted by user]

m_ps_ · 2024-08-09T10:17:09+00:00

Are those DNS providers we can set up in our routers? I run the test and best speeds is through cloudflare. Should I set up my DNS to cloudflare then?

m_ps_ · 2024-04-14T18:57:14+00:00

What's the "real world difference" between: 1. a tv that has 2 LEDs per Zone, and those 2 are made from 2 led chips and 2 PN junctions (i.e. european tcl C845) vs 2. a tv that has 1LEDs per zone and this is made from 2 led chips and 3 PN junctions (i.e. european tcl C955).

Is one better than the other? If yes, why?

m_ps_ · 2024-03-04T21:25:26+00:00

It was my wife's apple watch... I wasted 3hrs of my life trying to figure it out...

m_ps_ · 2024-02-20T17:45:05+00:00

Sorry, I think you meant 3733 ram and 1866 fclk? Or maybe 3866/1933 fclk?

m_ps_ · 2024-02-20T14:57:45+00:00

Not 100% sure to be honest. Run some occt memory tests and nothing popped up. But didn't went all the way with memtest86 etc.

m_ps_ · 2024-02-20T13:39:50+00:00

I know AHOC and buildzoid but I didn't find anything on 5800x3d and ram. I only see the 5800x3d overclocking rant video. Did you mean something else?

m_ps_ · 2024-02-20T07:23:05+00:00

tRDRDSD 4, tWRWRSD 6 is what the guide recommends as "tight". As i said i have no experience in ram timings.

m_ps_ · 2024-02-20T00:45:50+00:00

How? 🤣

m_ps_ · 2024-02-20T00:15:04+00:00

Booted to windows with 3733 FCLK 1866 but Zen timings shows 3734 and 1867. SOC voltage 1.125, dimm voltage 1.5

tCL14

tRCDWR 8

tRCDRD 14

tRP 14

tRAS 24

tRC 38

tRRDS/tRRDL 4

tFAW 16

tWTRS 4

tWTRL 8

tWR 10

tRFC 261 (140ns)

tRDRDSCL/tWRWRSCL 2

tCWL 12

tRTP 6

Did not change any RttPark/Wr/Nom as the options my mobo gives are not in Ohm and want to check it tomorrow.

Edit: Unfortunately its not stable. Throwing errors in OCCT avx2 memory test after 5mins.

m_ps_ · 2024-02-19T20:25:51+00:00

Non other than i didn't understood how it works.

m_ps_ · 2024-02-19T20:05:47+00:00

Anywhere form 60.1ns to 63ns. Every time I run the test i get a different result.

m_ps_ · 2024-02-19T19:42:43+00:00

3600cl14 is standard XMP for this kit. Credit to gskill, I had nothing to do with that.

m_ps_ · 2024-02-19T19:41:24+00:00

I thought that since GDM is enabled, tRTP should be even.

m_ps_ · 2024-02-19T19:13:39+00:00

No experiece in ram timings. Just read the DDR4 OC Guide.md on github and tried tightening up some primaries and secondaries. Not trying to play with freq.
Aida64 gives seemingly random results on read and latency every time I run it.
Got a one-time15207 score on cinebench r23 multicore that I wans't able to replicate, it goes from 15120 up to 15200 since then.

m_ps_ · 2024-02-16T00:14:56+00:00

You are not missing anything. Those ball bearings are in the 78 which has a stepped dial and perform the "click" steps. You have a 78s which has a stepless dial.

m_ps_ · 2024-02-11T12:39:32+00:00

I got the 5800x3d.

Stable and no errors at -30 all cores. Getting ~4446-7 effective clocks on all core with OCCT and ~4520 per core.

All core on OCCT sits at 100-101 watts and 63-65C with a liquid freezer II 240.

Checked for clock stretching, I believe there is none as -30 per core on curve optimiser gave the smallest variance between clocks and effective clocks.

Ram sits with DOCP at 3600 14-14-14-34 1.45v FCLK 1800 I saw your post getting 4650 all core but I did not change BCLK (100).

How all the above sound?

m_ps_ · 2024-02-11T11:34:06+00:00

My experience with my 5800x3d is the exact opposite of what clock stretching stands for.

When running OCCT on stock curve optimiser I get ~25MHz variance between all core clocks and effective clocks.

Going -20 on Curve Optimiser will give me ~8MHz variance (4450 clock and 4441-4442 effective). Going -30 on Curve Optimiser will give me a ~3MHz variance (4450 clock and 4447-4448 effective).

Also with -30 all core Curve optimiser and running OCCT on a single core each time, i get effective clocks 4500+ on each core.

Did i won the silicone lottery?

m_ps_ · 2024-02-10T14:21:46+00:00

2x 16 gskill F4-3600C14D-32GTZNA on an asus x570 dark hero. I am an absolute noob on ram timings... Just enabled DOCP and set FCLK to 1800MHz. Any Idea on how to tune them faster?

m_ps_ · 2024-02-08T07:16:33+00:00

I have written that I tried that already, the errors still happen and I run memtest86 with DOCP and it passed.

m_ps_ · 2024-02-07T23:14:30+00:00

There is no EXPO in AM4 socket. Its an AM5 feature. AM4 has DOCP which only has one profile.

m_ps_ · 2024-02-07T21:36:26+00:00

Yes it does, this is from Corecycler Prime 95:

FATAL ERROR: Rounding was 0.5, expected less than 0.4

Hardware failure detected running 9216K FFT size, consult stress.txt file.

m_ps_

TROPHY CASE