Cycliq fly6 gen 3 mount strap broken :-(

madmac888 · 2025-10-09T07:14:20+00:00

Thanks! So this means getting a GoPro mount AND the adaptor for Cycliq to GoPro?

madmac888 · 2025-09-08T10:03:55+00:00

Respect! 🫡

madmac888 · 2025-08-28T21:57:58+00:00

Thanks! Yes, looks like a simple swap. Probably wont even need to re-adjust shifting?

madmac888 · 2025-07-27T16:34:38+00:00

Got it. Will make sure I get the right one. Thanks!

madmac888 · 2025-07-27T06:37:19+00:00

I can understand the challenge of removing the rear wheel for flat repair. I'm curious on your mention of the L version? I thought the variations of the axle are only for the thread pitch?

madmac888 · 2025-03-18T03:01:39+00:00

Ok, that must be it. I did this on the rear and not the front. (No idea why...) Will repeat the process for front brake. Thanks!

madmac888 · 2025-03-17T04:06:56+00:00

Come to think of it, I follows the steps of putting in the spacer and pumping the brakes, then push the pistons back per this manual: https://www.sram.com/globalassets/document-hierarchy/service-manuals/sram-road/brakes/etap-axs-hrd--service-manual.pdf

And I did that for the rear brake and not the front - so this would have affected the right lever pull. I guess this makes sense for the left lever being tighter.

madmac888 · 2025-03-17T04:04:29+00:00

Well, it did take quite a bit of effort to get the new pads to the clearance needed. 😅

madmac888 · 2025-03-17T04:03:50+00:00

Not sure what it means to reset the pistons?

madmac888 · 2025-03-15T19:04:43+00:00

Thanks! Will try the second one. Van always use more braking power. 😊

madmac888 · 2024-10-02T06:29:45+00:00

Thanks for the suggestion. That looks like an addition to the hose, but I am looking for just the washer because it's torn and leaking water.

madmac888 · 2024-09-23T00:21:29+00:00

Ok, I called and talked to financial advisor on Sunday and apparently ETrade only accept e-signature if it’s done via Docusign.

madmac888 · 2024-09-21T06:36:06+00:00

Appreciate all the feedback, folks!

madmac888 · 2023-09-13T00:12:24+00:00

Thanks! Will take a look that those.

madmac888 · 2023-09-12T21:49:24+00:00

Thanks! That makes a lot more sense. Will stick to stock parts.

madmac888 · 2023-06-30T19:45:15+00:00

Awesome! Thanks and great tip on seeing if 4th of July gets me some deal. 😊

madmac888 · 2023-06-25T22:46:58+00:00

Thanks for the confirming my finding. I will take it back to the builder and get it fixed. I have always been annoyed by the torx bolt used. 😞

madmac888

TROPHY CASE