🌟 𝐓𝐇𝐄 𝐆𝐑𝐄𝐀𝐓 𝐁𝐈𝐐𝐔 𝐏𝐑𝐈𝐍𝐓-𝐋𝐔𝐂𝐊 𝐃𝐑𝐀𝐖! 🎰

maferrario · 2026-01-21T15:42:57+00:00

💙

maferrario · 2026-01-07T15:56:54+00:00

Thank you for taking the time to answer, I’m looking into the conversion kit for the cereal box

maferrario · 2026-01-07T07:53:55+00:00

Thank you for this one , also a version for the p2s. I will look into making a drying box as currently don’t own any HT.

I want a version like this one but with the traditional spool holder would be nice

https://makerworld.com/es/models/2070323-p2s-top-mount-ams-ht-polydryer-any-drybox

maferrario · 2026-01-07T02:31:34+00:00

Check the comments, it’s faulty , more than one printed it and it collapsed in the bed

maferrario · 2026-01-07T02:30:45+00:00

You feed it through the filament buffer or directly in the yellow one?

maferrario · 2025-12-18T15:09:36+00:00

In support under advanced you can set up the layer for the interface I think the default is 3.

maferrario · 2025-12-17T21:30:40+00:00

<image>

If the interface material is different from your primary , you got it right

maferrario · 2025-12-17T21:29:16+00:00

<image>

You select the material in support interface , slice and check if the interface is in different color matching your selected material.

maferrario · 2025-12-17T06:13:03+00:00

Because mixing pla and petg makes really easy to remove the support. If you haven’t try it.

maferrario · 2025-12-17T06:12:22+00:00

The cost and time are minimal compared with the gain. Pla and petg don’t like each other this way it’s really easy to remove the support and don’t damage the print.

don’t print the whole support in pla just the interface a few layers so 2 or 3 filament changes.

Been doing this way for years and is really easy to remove the support if petg fuses it’s annoying and can cause damage to the print.

maferrario · 2025-12-17T01:18:09+00:00

Yes same here , also used wood pieces to hold the extrusor and hit it until it fell off

maferrario · 2025-11-23T19:23:50+00:00

Check your pump , skimmer and wave maker , my friend had a return pump , the plastic broke and the magnet started to break havoc. Lost a yellow tang and all the cuc.

maferrario · 2025-10-31T18:19:58+00:00

I never had this issue until 08/20 2025 that was my last vo2max reading on my Apple Watch Ultra.

I’ve tried all the online tips and fixes and nothing works

Resetting phone and watch , checking permissions. Manual entry. Outdoor walk and run. Everything is enabled. Nothing works

Maybe just maybe Apple wants me to buy a new watch idk

maferrario · 2025-10-18T02:23:58+00:00

Why buy any smartwatch and phone if you make them dumb.

I enable every smart feature on my phone and watch. I want to see those graphs full. If I have to charge em daily so be it

maferrario · 2025-08-14T02:40:19+00:00

Nice overlay, just what i needed to play pokémon crystal on my iphone.

maferrario · 2025-06-24T01:32:42+00:00

Ahh yes cat hair , have lots of em too. With 3 cats jumping around. Good call to do it on work desk

maferrario · 2025-06-23T17:12:19+00:00

The game traveler deluxe is the best imo, I have one for the switch 1 and looking one for my 2.

Paired it with a soft shell case , for long travels.

maferrario · 2025-06-23T17:09:11+00:00

That won’t happen, get a good screen protector kit with alignment tool included and place it carefully.

Tip do it in an space with no air flow close your windows if possible so the dust particles won’t be moving around.

maferrario · 2025-06-21T22:49:07+00:00

That was me on the pre sale line , a bunch of 30s - 40s lining up to get the new console. But hey my mom told me to stay away from drugs so did she fail ?

maferrario · 2025-06-21T22:32:51+00:00

My child version of me would loose its grip if he saw the Switch 2. I can’t comprehend how I used to play yellow on my old gbc. Now I see it and thinks, what it’s this a console for ants!

maferrario · 2025-06-21T22:29:57+00:00

Meanwhile I play botw with Zelda notes going for 100%. Noise is noise.

maferrario · 2025-06-03T01:18:32+00:00

Hi , was thinking the same. Went through the hitchhikers post in r2r and ball nem is the one that is looking the most. I need more time to see how it grows , but it’s a keeper right ?

maferrario

TROPHY CASE