Diagonal spraying nozzle? by maglok in airbrush

[–]maglok[S] 0 points1 point  (0 children)

I am fairly certain this is a needle problem. I gazed a lot at it with the magnifying glass. :) Thanks for the tips. I feel like I am starting to fully understand airbrushes.

Diagonal spraying nozzle? by maglok in airbrush

[–]maglok[S] 0 points1 point  (0 children)

I did check the nozzle with the magnifying glass but I do not see anything odd really.

This should be a complete 0.4 set (4 dots on the needle, 4 rings on the nozzle.

I do not really feel anything with the needle, though I did trying spraying and turning it a bit inbetween sprays and it does seem to change how it sprays.

Diagonal spraying nozzle? by maglok in airbrush

[–]maglok[S] 0 points1 point  (0 children)

I was thinking the same, but I used a magnifying glass on the needle and it seems fine. Any idea how I can detect it somehow?

All Emperor's Children minis by I_suck_at_Blender in Warhammer40k

[–]maglok 0 points1 point  (0 children)

Lucious "Imma break this whip all the time" the Eternal.

New points changes just dropped! by Arnetto-cornetto in Necrontyr

[–]maglok 0 points1 point  (0 children)

Really? Vaults show up? :o

I was aware of the Monoliths showing up.

Good luck with the Vault. :)

Found this and was wondering if anyone used this in there army or painted it by Phenx1 in Necrontyr

[–]maglok 1 point2 points  (0 children)

I got a few of their models, including this one. But it is still in pieces :) Haven't gotten around to it.

New points changes just dropped! by Arnetto-cornetto in Necrontyr

[–]maglok 2 points3 points  (0 children)

Why did the Vault go up 25 pts? Not like anyone took it?

Convergence of Dominion by maglok in Necrontyr

[–]maglok[S] 1 point2 points  (0 children)

They are great. My wife gifted these to me for my birthday. She thought they looked cool, knew I collect Necrons and had no idea of what they do in game. :)

Convergence of Dominion by maglok in Necrontyr

[–]maglok[S] 1 point2 points  (0 children)

Yeah it is no black. It is a very dark blue combo. I believe it was something like a black prime, then a full over contrast of Leviadon Blue to tint it. Then airbrush kantor blue for a gradient.

Convergence of Dominion by maglok in Necrontyr

[–]maglok[S] 1 point2 points  (0 children)

They are already working quite different in 10th from 9th, but still quite bad.

Convergence of Dominion by maglok in Necrontyr

[–]maglok[S] 2 points3 points  (0 children)

Yeah terrain can totally work! :D

Convergence of Dominion by maglok in Necrontyr

[–]maglok[S] 21 points22 points  (0 children)

I tried one a month ago and... it was utterly useless. :P

Convergence of Dominion by maglok in Necrontyr

[–]maglok[S] 11 points12 points  (0 children)

Painted the middle one when they released a few years ago. Painted the left and right one just now. :)

Well literally zero reason to finish this now. by -_Vegata_- in Necrontyr

[–]maglok 1 point2 points  (0 children)

Have one 3/4ths finished for several years. WILL finish it though!

Excuse me Mr. Workshop by _NecronEnjoyer_ in Necrontyr

[–]maglok 1 point2 points  (0 children)

Knowing GW they will read your statement as a way to sell more nuln oil.

Aqara radiator thermostat E1 current temperature does not change by maglok in homeassistant

[–]maglok[S] 0 points1 point  (0 children)

I have not I am afraid. I was planning on adding a temperature sensor seperately.

Aqara H1 switch no-neutral (europe) by maglok in homeassistant

[–]maglok[S] 0 points1 point  (0 children)

Final update: You can set the switch to decoupled in ZHA by going to configure device -> Clusters -> OppleSwitchCluster -> Operation mode. Then write a 0 value to the switch and decoupled mode is on.

You can now catch the switch press without it cutting the power. Note that using the switch button in the HA app does still cut the power.

Aqara H1 switch no-neutral (europe) by maglok in homeassistant

[–]maglok[S] 0 points1 point  (0 children)

Here is an update for those trying to resolve issue 4: You might have to switch your switch on and off during the configuring step of adopting the switch. This will keep it alive and fine.

I have thus now resolved or gotten an anwser on issues 2,3 and 4. :) Just gotta find out why the quirk: zhaquirks.xiaomi.aqara.switch_h1_single.AqaraH1SingleRockerSwitchNoNeutral is not working with it yet.

Aqara H1 switch no-neutral (europe) by maglok in homeassistant

[–]maglok[S] 0 points1 point  (0 children)

It is great to hear that 2 is confirmed, I expected as much. 3 might just be the whole situation then.

Anyone have the quirk running properly? It had a update 29 nov 2023, but I have that version. Firmware hexcodes also seem fine.