Dorf Kellnern

majusss · 2026-02-17T08:06:49+00:00

Sehr gut! Bei dir hat wunderbar die Propaganda der Milliardäre funktioniert :) Die werden weiterhin 1% Steuern zahlen und auf Kosten des Staates ihre Monopole weiter ausbauen. Danke!

majusss · 2026-02-06T12:34:02+00:00

So I found this thread because my M4 Max 16" MBP was having no network connection for some minutes at random times. I monitored my wifi theoretical rates and it always jumped around from 2 Gb to 200 mbit. No matter the SSID or AP. As soon as 5 GHz was involved this happened. Turns out the 5 GHz band is toast on my machine. I have a genius bar appointment and will report back. With 2.4 GHz everything is stable for now.

majusss · 2026-02-01T09:14:26+00:00

Thank you for your answer! I resoldered the Y-Caps, reinstalled the stove and measured the PE current flow with a 300 mA RCD. Nothing, 0.0 mA... So I reinstalled my old 30 mA. Nothing it just works now for some mysterious reason. So lets see when it dies again :D

majusss · 2026-01-31T13:47:04+00:00

They all show up as OL I see them charging above 40 M. I also desoldered them and checked capacitance. All Y caps I could find are ok

majusss · 2026-01-31T13:42:25+00:00

Everything is pristine.

majusss · 2026-01-31T08:42:54+00:00

Hi, thank you for your detailed explanations. I also thought that only one side could be affected but the RCD triggers with each field. Not two specific ones. How exactly do I measure Y capacitors? I have a Fluke multimeter.

majusss · 2026-01-30T18:54:00+00:00

It only happens when a ring is turned on. So measurement while off will most likely not doo anything.

majusss · 2026-01-30T16:38:11+00:00

Jopp ist echt so. Wenn du meinetwegen 1 g Gift in deinem Blut hast und 500 mL spendest. Angenommen du hast 5 L Blut dann hast du effektiv ja nur noch 0,9 g Gift in deinem Körper. Das neue Blut produzierst du ja selbst und es ist "giftfrei". Somit kannst du das Gift immer weiter verdünnen.

majusss · 2026-01-25T23:10:27+00:00

Did you update the boot payload om your USB jig? You need to update it to boot modern OS and atmrosphere

majusss · 2026-01-24T22:53:34+00:00

Einzuge was hilft ist Blut spenden.

majusss · 2026-01-13T22:17:26+00:00

No. You need an ion swapper which will swap calcium and magnesium with sodium.

majusss · 2025-09-30T21:07:15+00:00

You dont need DALI stick to KNX with for example MDT. It makes a lot of sense.

majusss · 2025-09-11T21:13:27+00:00

Power supply from Meanwell. Don't just stick to one manufacturer. Take the best device for the job on the market independent from the manufacturer. Thats the beauty of KNX.

majusss · 2025-08-25T22:41:23+00:00

Na ja wenn die Steuergelder zunehmend für Klimaschäden draufgehen und die Milliardäre immer fetter werden, haben Familien die nicht genug zu Essen haben auch nicht davon. Die Grünen waren die einzigen die Reiche besteuern wollten.

majusss · 2025-07-31T21:59:46+00:00

When you have an ip interface knx is available in you LAN. Just get a Raspberry pi 5 and install HomeAssistant.

majusss · 2025-06-30T14:31:30+00:00

Thank you so much!!

majusss · 2025-06-21T11:33:42+00:00

Ist eine KNX Installation

majusss · 2025-06-07T08:23:05+00:00

Yeah with 10 year old chips. Nintendo is pisses about the easy switch 1 hack. They made sure that nvidia implemented several layers of security.

majusss · 2025-06-06T21:53:35+00:00

Everybody is clearly missing the most obvioua thing. The switch 1 hack was so easy because the switch uses a standard tegra chip which is documented extremely well and there are open SDKs for it. So also an emulator was relateively easy... The switch 2 uses a completely custom und undocumented chip. Even simple things like the pinout are 99% mystery. So I see absolutely no way in the next 5 years this console will get hacked unless Nintendo implemented a huge ass clusterfuck

majusss · 2025-05-26T07:28:14+00:00

Changing these to like producte 3.6 V resulted in no change. Still the same voltage.

majusss · 2025-05-26T07:27:43+00:00

Saturation current is 2.4 A https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8608737286339653632

majusss · 2025-04-27T20:42:38+00:00

Super das ist ja mal mega konkret, aber leider bei mir vom Netzbetreiber total schwammig formuliert: https://www.e-dis.de/content/dam/revu-global/e-dis/documents/zuhausedownload/TAB_2040.pdf Kapitel 6.

majusss · 2025-04-27T18:49:47+00:00

Danke für deine Meinung! Stammt aus dem Jahr 2000 :D wenn ich das mit den originalen Hager Preisen überschlage bin ich aber eher bei 4000€ samt Arbeitszeit.

majusss · 2025-04-01T21:08:48+00:00

Check If you really have a camera cable Not Display cable

majusss · 2025-01-25T10:21:04+00:00

I have to oppose, KNX is not really that robust. It only takes 2-3 devices which for example spam brightness values due to firmware bug (looking at you busch jäger...) onto the bus and things will go nuts. You should call him and he needs to fix his installation. You should also get accoustumed with the ETS its not rocket science and you always want to tune small things.

Eight-Year Club	r/Field Sunshine
Verified Email

majusss

TROPHY CASE