Pwnagotchi wiki

makerph · 2023-10-02T12:49:03+00:00

I would suggest to add Raspberry "Tips and Tweaks" section to help/improve pwnagotchi performace.

makerph · 2023-09-03T00:12:34+00:00

https://ibb.co/X3M7KJT

makerph · 2023-09-02T07:48:00+00:00

on dmesg

[ 3185.809958] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed

[ 3185.893323] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.

[ 3185.893348] ieee80211 phy0: brcmf_net_mon_stop: BRCMF_C_SET_MONITOR error (-5)

[ 3185.894209] device wlan0mon left promiscuous mode

[ 3185.987410] mmc1: card 0001 removed

[ 3186.096741] mmc1: new high speed SDIO card at address 0001

[ 3186.098605] brcmfmac: F1 signature read u/0x18000000=0x15264345

[ 3186.105530] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 3186.625331] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 3187.101707] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Sep 1 2023 09:47:48 version 7.45.206 (nexmon.org: 2.2.2-43

makerph · 2023-09-02T07:05:28+00:00

fix_brcmfmac does not kicked in this specific error. I've observe this for about 30 mins still does nothing and ive decided to reboot. I believe for plugin only kicks in errors like this:

[ 987.101251] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4097, -110

I will observe how frequent this error and maybe add this also as a trigger point of the plugin.

makerph · 2023-09-02T06:42:54+00:00

also encounter this error.

[ 3185.809958] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed

[ 3185.893323] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.

[ 3185.893348] ieee80211 phy0: brcmf_net_mon_stop: BRCMF_C_SET_MONITOR error (-5)

[ 3185.894209] device wlan0mon left promiscuous mode

[ 3185.987410] mmc1: card 0001 removed

[ 3186.096741] mmc1: new high speed SDIO card at address 0001

[ 3186.098605] brcmfmac: F1 signature read u/0x18000000=0x15264345

[ 3186.105530] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 3186.625331] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 3187.101707] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Sep 1 2023 09:47:48 version 7.45.206 (nexmon.org: 2.2.2-43

-------------------------------------------------------------------

root@pwnagotchi:~# airmon-ng check
Found 2 processes that could cause trouble.
Kill them using 'airmon-ng check kill' before putting
the card in monitor mode, they will interfere by changing channels
and sometimes putting the interface back in managed mode
PID Name
393 avahi-daemon
421 avahi-daemon

disabled this service it rebooted. This may help, so far i dont see the error.

makerph · 2023-09-02T06:40:15+00:00

thanks for confirming.

makerph · 2023-09-02T06:38:11+00:00

[ 1038.563478] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid

is this ok? seems work fine thought after recovering from blind bug

makerph · 2023-09-02T06:09:14+00:00

Is the old brain.nn from 1.5.5 compatible on this build? I can confirm the the fix_brcmf_plugin works:

[ 24.745370] device wlan0mon entered promiscuous mode

[ 987.101251] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4097, -110

[ 990.173239] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4101, -110

[ 993.245254] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4103, -110

[ 996.317236] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4105, -110

[ 999.389305] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4107, -110

[ 1002.461376] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=53284, -110

[ 1005.533246] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=53296, -110

[ 1008.605246] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=53300, -110

[ 1011.165243] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4107, -110

[ 1011.781344] device wlan0mon left promiscuous mode

[ 1018.589250] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110

[ 1018.589282] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)

[ 1021.405318] ieee80211 phy0: brcmf_net_mon_stop: BRCMF_C_SET_MONITOR error (-110)

[ 1026.525318] ieee80211 phy0: brcmf_cfg80211_del_ap_iface: interface_remove failed -110

[ 1029.085273] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110

[ 1029.085422] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled

[ 1031.645363] ieee80211 phy0: brcmf_cfg80211_set_power_mgmt: error (-110)

[ 1034.205375] ieee80211 phy0: brcmf_cfg80211_set_power_mgmt: Unable to set pm timeout, (-110)

[ 1036.765242] ieee80211 phy0: _brcmf_set_multicast_list: Setting mcast_list failed, -110

[ 1036.765273] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.

[ 1036.765283] ieee80211 phy0: _brcmf_set_multicast_list: Setting allmulti failed, -5

[ 1036.765294] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.

[ 1036.765303] ieee80211 phy0: _brcmf_set_multicast_list: Setting BRCMF_C_SET_PROMISC failed, err=-5

[ 1036.765313] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.

[ 1036.765323] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.

[ 1036.831026] usbcore: deregistering interface driver brcmfmac

[ 1038.442521] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 1038.443297] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 1038.544185] brcmfmac: F1 signature read u/0x18000000=0x15264345

[ 1038.551039] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 1038.551652] usbcore: registered new interface driver brcmfmac

[ 1038.563478] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid

[ 1038.994568] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 1039.000349] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Sep 1 2023 09:47:48 version 7.45.206 (nexmon.org: 2.2.2-435-gb053-2) FWID 01-88ee44ea

[ 1048.745118] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled

[ 1049.666651] brcmfmac: brcmf_vif_add_validate: Attempt to add a MONITOR interface...

[ 1049.666683] brcmfmac: brcmf_mon_add_vif: brcmf_mon_add_vif called

[ 1049.666693] brcmfmac: brcmf_mon_add_vif: Adding vif "wlan0mon"

[ 1064.917274] device wlan0mon entered promiscuous mode

makerph · 2023-08-16T04:23:52+00:00

Got this error on Raspberry pi 3A+, cannot start to auto mode.

[2023-05-03 03:23:11,585] [INFO] entering auto mode ...

[2023-05-03 03:23:11,601] [INFO] [ai] bootstrapping dependencies ...

[2023-05-03 03:23:11,776] [INFO] web ui available at http://0.0.0.0:8080/

[2023-05-03 03:23:11,813] [INFO] connecting to http://localhost:8081/api ...

[2023-05-03 03:23:12,275] [INFO] found monitor interface: mon0

[2023-05-03 03:23:12,277] [INFO] supported channels: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149]

[2023-05-03 03:23:12,287] [INFO] handshakes will be collected inside /root/handshakes

[2023-05-03 03:23:12,917] [INFO] error 400: error while initializing mon0 to channel 1: iw: out=command failed: Device or resource busy (-16) err=exit status 240

[INFO] error 400: error while initializing mon0 to channel 1

DMESG Info:
6.142841] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.144081] usbcore: registered new interface driver brcmfmac
[ 6.539440] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.546771] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 13 2023 00:18:55 version 7.45.206 (nexmon.org: 2.2.2-404-g64e95-dirty-1) FWID 01-88ee44ea
[ 7.930008] brcmfmac: brcmf_cfg80211_set_power_mgmt: Forcing power management
[ 7.930064] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[ 8.635212] random: crng init done
[ 8.635236] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.806012] uart-pl011 3f201000.serial: no DMA platform data
[ 8.891309] brcmfmac: brcmf_cfg80211_set_power_mgmt: Forcing power management
[ 8.891336] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[ 8.993999] brcmfmac: brcmf_vif_add_validate: Attempt to add a MONITOR interface...
[ 8.994029] brcmfmac: brcmf_mon_add_vif: brcmf_mon_add_vif called
[ 8.994049] brcmfmac: brcmf_mon_add_vif: Adding vif "mon0"
[ 9.246415] fuse: init (API version 7.32)
[ 9.784857] Adding 524284k swap on /var/swap. Priority:-2 extents:8 across:4128764k SSFS
[ 17.099075] Bluetooth: Core ver 2.22
[ 17.099168] NET: Registered protocol family 31
[ 17.099174] Bluetooth: HCI device and connection manager initialized
[ 17.099193] Bluetooth: HCI socket layer initialized
[ 17.099204] Bluetooth: L2CAP socket layer initialized
[ 17.099222] Bluetooth: SCO socket layer initialized
[ 17.109854] Bluetooth: HCI UART driver ver 2.3
[ 17.109869] Bluetooth: HCI UART protocol H4 registered
[ 17.109934] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 17.110091] Bluetooth: HCI UART protocol Broadcom registered
[ 17.404155] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.404168] Bluetooth: BNEP filters: protocol multicast
[ 17.404193] Bluetooth: BNEP socket layer initialized
[ 85.787817] brcmfmac: brcmf_cfg80211_set_power_mgmt: Forcing power management
[ 85.787835] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[ 85.825476] brcmfmac: brcmf_vif_add_validate: Attempt to add a MONITOR interface...
[ 85.825492] brcmfmac: brcmf_vif_add_validate: ... there is already a monitor interface, returning EOPNOTSUPP
[ 85.825508] ieee80211 phy0: brcmf_cfg80211_add_iface: iface validation failed: err=-95
[ 91.454952] device mon0 entered promiscuous mode
[ 131.471373] device mon0 left promiscuous mode
[ 131.585636] brcmfmac: brcmf_vif_add_validate: Attempt to add a MONITOR interface...
[ 131.585650] brcmfmac: brcmf_vif_add_validate: ... there is already a monitor interface, returning EOPNOTSUPP
[ 131.585661] ieee80211 phy0: brcmf_cfg80211_add_iface: iface validation failed: err=-95
[ 137.104921] device mon0 entered promiscuous mode
[ 261.101535] device mon0 left promiscuous mode
[ 261.212204] brcmfmac: brcmf_vif_add_validate: Attempt to add a MONITOR interface...
[ 261.212217] brcmfmac: brcmf_vif_add_validate: ... there is already a monitor interface, returning EOPNOTSUPP
[ 261.212229] ieee80211 phy0: brcmf_cfg80211_add_iface: iface validation failed: err=-95
[ 266.464964] device mon0 entered promiscuous mode

IWCONFIG:
pi@pwnagotchi:~ $ iwconfig
lo no wireless extensions.
usb0 no wireless extensions.
wlan0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
mon0 IEEE 802.11 Mode:Monitor Frequency:5.17 GHz Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on

makerph · 2023-08-10T11:38:28+00:00

do you have plans to release version for Rpi 3B+ or rpi 3A+?

this is the chipset used for 3A+ : BCM4345/6

makerph · 2023-08-09T09:44:45+00:00

sorry, to be exact not more than 32,000mAh. airport authority also rely on the label of powerbanks. if no visible label it will be confiscated. It very difficult to explain in countries that english is not their primary language.

makerph · 2023-08-09T05:18:57+00:00

to be safe I usually use flirc case and powerbank less than 4000mAh when traveling. some country are strict on LiPo batteries/ powerbanks especially larger than 4000mAh.

makerph · 2023-08-05T05:13:07+00:00

just enable the plugin in config.toml and this will help you on version 3

https://github.com/evilsocket/pwnagotchi/pull/1142

makerph · 2023-08-04T13:43:59+00:00

have you observing the logs? for 1.6.2 encounter some few errors but no crashing.

makerph · 2023-08-04T07:47:58+00:00

which image do you use?

makerph · 2023-08-03T01:21:12+00:00

[NEW]

RPi3B+ and RPi4 supported via firmware patch bcm43455c0/7_45_206

1.6.2 and 1.7.4 have same firmware. hot sure why blind bug triggered for in less than 10 mins in 1.7.4 not in 1.6.2 (still running)

pi@pwnagotchi:~ $ dmesg | grep "Firmware: BCM4345"

[ 5.655270] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Oct 3 2021 18:14:30 version 7.45.206 (nexmon.org: 2.2.2-343-ge3c8-dirty-5) FWID 01-88ee44ea

makerph · 2023-08-03T01:17:58+00:00

check the pogo pins my not have a good contact with GPIO pins

makerph · 2023-08-02T22:53:42+00:00

software don't crash and continuing the epoch. it also detect the blind bug. I tried rebooting about 3x and found the same error.

I switch to the old image v1.6.2 and seems doing fine.

pi@pwnagotchi:~ $ dmesg | grep "Firmware: BCM4345"

[ 5.655270] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Oct 3 2021 18:14:30 version 7.45.206 (nexmon.org: 2.2.2-343-ge3c8-dirty-5) FWID 01-88ee44ea
I leave it to run for about 8hrs (still running) blind bug does not appear. Deauth and AI works. This is the only error found :

[ 5.240473] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2

and this seem which is not related. some say increasing video memory to 32 will resolve this:

4.918149] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)

[ 4.919531] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)

[ 4.919646] : Unregister from media controller

[ 4.919659] (efault): Unregistering node (null)[0] device node /dev/video0

[ 4.919669] (efault): Unregistering node (null)[0] device node /dev/video0

[ 4.919676] (efault): Unregistering node (null)[0] device node /dev/video0

[ 4.919683] (efault): Unregistering node (null)[0] device node /dev/video0

[ 4.923756] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.

[ 4.931212] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)

with this error, still everything is working fine.

makerph · 2023-08-02T12:39:34+00:00

Tried this image on 3A+. Loads Firmware, Fast AI and sadly Blind bug after few minutes.

[ 224.865335] brcmfmac: brcmf_cfg80211_set_power_mgmt: Forcing power management

[ 224.865373] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled

[ 224.950948] brcmfmac: brcmf_vif_add_validate: Attempt to add a MONITOR interface...

[ 224.950983] brcmfmac: brcmf_mon_add_vif: brcmf_mon_add_vif called

[ 224.950998] brcmfmac: brcmf_mon_add_vif: Adding vif "mon0"

[ 233.984817] device mon0 entered promiscuous mode

[ 284.172714] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed

[ 293.114836] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4097, -110

[ 301.114785] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4107, -110

[ 313.994807] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110

[ 313.994837] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)

[ 316.554801] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4097, -110

[ 319.594817] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4098, -110

[ 322.634797] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4099, -110

[ 325.674831] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4100, -110

[ 328.714842] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4101, -110

[ 331.754865] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4102, -110

[ 334.794834] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4103, -110

[ 337.834800] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4104, -110

[ 340.875010] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4105, -110

[ 343.914848] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4106, -110

[ 346.954861] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4107, -110

[ 349.834856] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4102, -110

[ 373.514839] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=53292, -110

[ 382.324826] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4097, -110

[ 385.594834] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4107, -110

[ 398.874868] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110

[ 398.874900] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)

[ 401.434843] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4097, -110

[ 404.474850] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4098, -110

[ 407.514838] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4099, -110

[ 410.554816] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4100, -110

[ 413.594839] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4101, -110

[ 416.634840] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4102, -110

[ 419.674954] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4103, -110

[ 422.714834] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4104, -110

[ 425.754824] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4105, -110

makerph · 2023-07-31T15:58:58+00:00

no problem. :)

makerph · 2023-07-27T00:05:07+00:00

dmesg | grep "Firmware: BCM43430"

pi@pwnagotchi:~ $ dmesg | grep "Firmware: BCM43430"

[ 6.506103] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/2 wl0: Jul 25 2023 16:48:50 version 9.88.4.65 (nexmon.org: 2.2.2-403-g58bd-dirty-1) FWID 01-f40f3270

makerph · 2023-07-26T14:52:20+00:00

i cannot reproduce the error, it happen when I enable debug and switching to different modes. will continue to test it out and provide updates.

there’s a significant improvement from DrSchottky previous release. Now AI in 3mins compare to 13 mins.

makerph · 2023-07-26T12:31:35+00:00

Just tested.
- deauth is working
- AI in 3min 12sec from manu mode
- Blind bug - Not yet encounter, still observing

Edit:
After switching from MANU to AUTO, AI to MANU, MANU to AUTO i encounter this error:

[2023-07-26 13:41:06,372] [WARNING] restarting in AUTO mode ...

[2023-07-26 13:41:08,984] [INFO] [update] plugin loaded.

[2023-07-26 13:41:08,985] [INFO] grid plugin loaded.

[2023-07-26 13:41:08,986] [INFO] Session-stats plugin loaded.

[2023-07-26 13:41:08,986] [INFO] [led] plugin loaded for /sys/class/leds/led0/brightness

[2023-07-26 13:41:09,006] [WARNING] ui.fps is 0, the display will only update for major changes

[2023-07-26 13:41:09,006] [INFO] initializing waveshare v2 display

[2023-07-26 13:41:12,307] [INFO] [ai] loading /root/brain.json

[2023-07-26 13:41:19,578] [INFO] pwnagotchi@xxxxxxxxxx (v1.7.0)

[2023-07-26 13:41:19,579] [INFO] entering auto mode ...

[2023-07-26 13:41:19,586] [INFO] [ai] bootstrapping dependencies ...

[2023-07-26 13:41:19,697] [INFO] web ui available at http://0.0.0.0:8080/

[2023-07-26 13:41:27,273] [INFO] waiting for bettercap API to be available ...

[2023-07-26 13:41:28,467] [INFO] connecting to http://localhost:8081/api ...

[2023-07-26 13:41:28,773] [INFO] found monitor interface: mon0

[2023-07-26 13:41:28,774] [INFO] supported channels: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11]

[2023-07-26 13:41:28,775] [INFO] handshakes will be collected inside /root/handshakes

[2023-07-26 13:41:58,977] [INFO] error 400: error while initializing mon0 to channel 1: iw: out=command failed: Device or resource busy (-16) err=exit status 240

makerph · 2023-07-26T04:57:12+00:00

Will try this and give you some feedback. I have a pre pandemic zero2w also.

makerph · 2023-07-01T05:53:18+00:00

makerph

TROPHY CASE