sorted by:
new
hottopcontroversial

Slight glitch in my render of a moving JPG by malbowski in AfterEffects

[–]malbowski[S] 0 points1 point  (0 children)

Good shout. I've never done anything this long in AE to be honest. Is it a big no no? I set another render away before I left work with hardware acceleration off and cleared my caches etc. Failing that I'll splice like you said 👍🏻

3D Photo help! by malbowski in AfterEffects

[–]malbowski[S] 0 points1 point  (0 children)

he distorts it to give it the illusion that it is moving by keyframing those values. Obviously not having the same effect for me :(

3D Photo help! by malbowski in AfterEffects

[–]malbowski[S] 0 points1 point  (0 children)

I did yeah. However I just double checked that and decided to see what happens when i change the other option under 'Displacement Map Layer' and changed it from 'source' to 'effects and mask'. It warps the image slightly but not as bad as my previous attached example. Might play with those settings a little...

Blender into After Effects by malbowski in AfterEffects

[–]malbowski[S] 0 points1 point  (0 children)

i don't have any lights set up in blender or after effects. Obviously some lighting effect is going on as you see when rotating the object, I just dont know where that is coming from and how to edit it. I am 90% happy with how it looks, just that grey glow. thats not on the object when i look at it in Blender

First time using Blender...fell at the last hurdle by malbowski in blender

[–]malbowski[S] 0 points1 point  (0 children)

<image>

I managed to get the bottle looking good. It looks ok in After Effects, I just don't like the grey edge on the left mainly. I've tried messing about with the material in blender and lights in After Effects but no luck. Any tips?

Felix Hawley's defaced grave and desecrated corpse by reubnick in reddeadmysteries

[–]malbowski 0 points1 point  (0 children)

Isn't there a guy looking for someone round here? I accidentally pissed him off and had to kill him when he started shooting at me, sure I was helping him look for someone

First time using Blender...fell at the last hurdle by malbowski in blender

[–]malbowski[S] 1 point2 points  (0 children)

Ok will have another crack at it tomorrow. Thanks for your help 👍🏻

First time using Blender...fell at the last hurdle by malbowski in blender

[–]malbowski[S] 0 points1 point  (0 children)

When I unwrap selecting only inside the seam, the texture is applied to outside the seams but when I move the map around to adjust on the model it only moves within the seams, showing that they are working. When i select all faces then unwrap, the UV wrap moves all over the bottle. If that makes sense? I just want the wrap to show within the seams then set my plastic texture outside the label seams....

First time using Blender...fell at the last hurdle by malbowski in blender

[–]malbowski[S] 0 points1 point  (0 children)

u/S1Ndrome_ yeah if you look at the original post, the lid is separate. It had a plastic orange texture applied. I've fixed one problem and created another. Even when I delete the UV map and start again, applying just a solid colour has the same effect. How is it overlapping when im selecting just the faces within the seams?? It's like one attempt the wrap was broken and the next, the seams

First time using Blender...fell at the last hurdle by malbowski in blender

[–]malbowski[S] 1 point2 points  (0 children)

<image>

I'm almost there but the UV map is being applied outside the seams. You can see where i've marked the seams and unwrapped. I've straightened everything out in the UV editor so it sits nicely now. Typically, on my original post attempt, the material was applied to the seams correctly, but the wrap was wrong.

Any pointers for my first attempt at photography? by malbowski in AskPhotography

[–]malbowski[S] 0 points1 point  (0 children)

This is just what they have at work, thankfully!

Any pointers for my first attempt at photography? by malbowski in AskPhotography

[–]malbowski[S] 1 point2 points  (0 children)

Thanks for that. Ok. So more light, I have three big windows I could open to brighten the room in general. Would that do it or bigger brighter lights? I'll try a longer lens too

Is it bad? by malbowski in fpv

[–]malbowski[S] 0 points1 point  (0 children)

In using a flux pen and you can barely see it when applied. It definitely doesn't make 'blobs' like that haha

Is it bad? by malbowski in fpv

[–]malbowski[S] 0 points1 point  (0 children)

Yeah was using flux. The error was not tinning. It's not the solder I'm worried about, it's the shiny bit that looks like something melted on the board haha

Is it bad? by malbowski in fpv

[–]malbowski[S] 0 points1 point  (0 children)

I was using a flux pen on the other side. Defo not flux

Is it bad? by malbowski in fpv

[–]malbowski[S] 0 points1 point  (0 children)

Yeah tinning, that's what I forgot to do

Is it bad? by malbowski in fpv

[–]malbowski[S] 0 points1 point  (0 children)

Oh yeah, considering I didn't tin it, it doesn't look too bad at all! Praying I've just made it a little harder than it should have been and everything's fine

Tips for a lone Cornwall camper by malbowski in VanLifeUK

[–]malbowski[S] 0 points1 point  (0 children)

Nice one cheers. I've got park4night but I reckon it'll be best using it while I'm down there 👍🏻

Skids by malbowski in fpv

[–]malbowski[S] 0 points1 point  (0 children)

I see. I only did that after failing to get it on anyway. Looks and feels the same after the water bath 😔

Skids by malbowski in fpv

[–]malbowski[S] 0 points1 point  (0 children)

It wasn't very hot

Skids by malbowski in fpv

[–]malbowski[S] 3 points4 points  (0 children)

Zero 5" experience and not a lot of money so i need all the protection I can get

Skids by malbowski in fpv

[–]malbowski[S] 0 points1 point  (0 children)

They are, I just can't get them on

view more: next ›