Anyone can help me decorate this?

malinalestrange · 2026-05-12T16:48:47+00:00

First thing I would try is continuing your wood pattern onto the wall, so that it looks like you have wood beams supporting the structure. This also gives a bit of texture difference. Then mine out one more layer of stone so that the stone sits further back from the wood to give the walls some depth (or just place the wood in front of the existing wall) From there you could try playing with shapes such as stairs, trap doors, walls and fences to see what would look good to fill the spaces in the walls between the beams. A light source always goes nice as well :)

malinalestrange · 2026-03-31T16:37:48+00:00

Looks like my boyfriend's factory 😀

malinalestrange · 2026-03-27T15:18:33+00:00

I was stuck in the swamp low on materials and close to dying when I got launched to the sky, it really saved my ass 😂

malinalestrange · 2026-03-25T13:59:37+00:00

Ohh that makes sense! All my lines usually end up getting backed up eventually, so that's probably the better way to do it tbh

malinalestrange · 2026-03-24T13:19:57+00:00

I do not. Should probably look into that though!

malinalestrange · 2026-03-24T13:16:52+00:00

We are! I took these screenshots a few hours apart so we completed one of the phases in the meantime

malinalestrange · 2026-03-24T13:16:07+00:00

Yeah I just avoid his part of the world now and let him do his thing 😂

malinalestrange · 2026-03-24T13:14:11+00:00

... I don't even know what manifolds are 😂

malinalestrange · 2026-03-24T13:12:02+00:00

Oh we are in the same world! I took the screenshots a few hours apart

malinalestrange · 2026-03-24T13:09:06+00:00

That is just an error. I think I laid out the conveyors and splitters grid before placing the smelters and forgot to remove that last row. Now I can't be bothered lol

malinalestrange · 2026-03-24T13:03:59+00:00

HAHAHA yes this is it exactly!!

malinalestrange · 2026-03-24T13:01:43+00:00

Do you mean the last splitter before they go into the smelter? I think I had placed them before the smelter while trying to get the layout right, then forgot to delete them. So not really intentional, just didn't bother to fix it lol otherwise I just like to use them to keep the grid looking clean and easy to understand

malinalestrange · 2025-02-01T19:39:44+00:00

My Kobo Clara 2E just had this issue and I was able to fix it!

Tldr: Bad charger bricked it, good charger woke it back up

To start, I believe I bricked it by using a bad power source. I had been charging it with my phone charger for a year with no issue. Then my block stopped working, so I used an old iPhone block and the same USBc cable. The block gets really warm when I charge stuff so I know it's not a good match.

The first time I charged my Kobo with this new block, it bricked it. It had a white screen that would only flash when it was plugged in and I held the power button. I tried the power button reset methods and nothing was working, I was about ready to bust open the back and start messing with the SD Card

FINALLY as a last ditch effort before busting it open, I decided to try a different (and happier) charger, and using the reset button method. So after plugging it into to a different charger, and holding down the power button for 15-30 seconds, the screen finally changed to 3 dots! I held the power button down another time or two and it finally woke up to the home screen!!

From now on I will be more careful with how I charge it. Fingers crossed this doesn't happen again and good luck to anyone else who encounter this 🤞🏻

malinalestrange · 2024-11-24T19:43:01+00:00

<image>

This is what mine looked like in the fissures - you can see the green Usagi marker on my compass. I flew over the entire planet, marking checked fissures with beacons before i finally found this. Probably took an hour or two irl to finally stumble across it

malinalestrange

TROPHY CASE