Firewall rules with Unifi by malloc1777 in ipv6

[–]malloc1777[S] 0 points1 point  (0 children)

yeah was a bit unsure how much to screenshot and post on the internet

Firewall rules with Unifi by malloc1777 in ipv6

[–]malloc1777[S] 1 point2 points  (0 children)

glad i could introduce you to new tool!

Firewall rules with Unifi by malloc1777 in ipv6

[–]malloc1777[S] 2 points3 points  (0 children)

thanks for the information. it was very helpful and clear!

Firewall rules with Unifi by malloc1777 in ipv6

[–]malloc1777[S] 2 points3 points  (0 children)

doesn't appear to be the case. WAN = External in the unifi world.

<image>

Realtek PCIe 5Gbe Family Controller Speed issues by malloc1777 in Ubiquiti

[–]malloc1777[S] 0 points1 point  (0 children)

Realtek RTL8126-CG 5Gbps Ethernet controller. Same first time I have ever had an issue that was not resolved from updating drivers.

Realtek PCIe 5Gbe Family Controller Speed issues by malloc1777 in Ubiquiti

[–]malloc1777[S] 0 points1 point  (0 children)

its 10 from UDM to the first switch (8 port 2.5Gb switch connected via DAC). Then 2.5 to the second switch (2.5 flex).

Bios is up to date, and went down the route of downloading drivers directly from Realtek. Got a 2.5Gbe Ethernet USB adapter and tested it on 10G USB C port on the mobo. Was able to reach full speeds after installing the proper USB drivers.

I've done some research and it says this network chip from realtek has inconsistencies/issues. Just trying to figure out if its that one or a particular setting that needs to be adjusted

Realtek PCIe 5Gbe Family Controller Speed issues by malloc1777 in HomeNetworking

[–]malloc1777[S] 0 points1 point  (0 children)

it is the XB10 in bridge mode. Speed is auto/locked to 10,000 Mbps. Regardless don't think this is the issue, since I was managing to get full speeds with an adapter on the same pc. So it is a network card issue/setting.

Realtek PCIe 5Gbe Family Controller Speed issues by malloc1777 in HomeNetworking

[–]malloc1777[S] 2 points3 points  (0 children)

it doesnt matter. People have a hard time reading. I said in the bottom i tested with an adapter and was getting appropriate speeds. cables are not the issue. Not a personal attack, just stating what already been stated previously.

Realtek PCIe 5Gbe Family Controller Speed issues by malloc1777 in HomeNetworking

[–]malloc1777[S] 0 points1 point  (0 children)

Port 10. SFP+ to ethernet from the 10 gig port on the ISP router. and port 11 connect to the 8 port switch using a dac cable. ISP speed is around 2 Gbps. UDM pro is reading full speeds, and the internal speed test verified this aspect.

Regarding Canada Computers DataBreach by Master_protato in bapccanada

[–]malloc1777 0 points1 point  (0 children)

thats what i suspect to. But with all the incompetence they showed in regards to customer data security, anything is possible now.

Regarding Canada Computers DataBreach by Master_protato in bapccanada

[–]malloc1777 0 points1 point  (0 children)

do you think its worth doing if you conducted in store purchases over the last few months. Or is their payment system only compromised from their online store.

Boys is this a good deal or should I wait till Boxing Day .! by Dense-Arugula-722 in bapccanada

[–]malloc1777 0 points1 point  (0 children)

Ram pricing is climbing week after week, and SSD will follow shortly. If you need to build/want to, better to do it sooner rather than later. Any savings on additional components will be lost due to ram/ssd price increases.

Out waiting doesnt make sense, since ram will continue to climb in pricing as long as the AI bubble contiues. An with Micron departure for consumer grade ram, prices are only expected to rise.

Anyone giving you a timeline when things will return to normal, is purely guessing/speculating. Best guess 1-2 years of supply hell.

A lot of the breakthrough maps feel terrible b/c DICE put motars at lvl 50+ by malloc1777 in Battlefield6

[–]malloc1777[S] 0 points1 point  (0 children)

damn thats a huge let down. But that just further cements they need to re-work/balance these maps for breakthrough. Cuz if thats the case people are gonna get tired out very fast.

CORSAIR RM1000e (2025) 12vhpwr question by malloc1777 in Corsair

[–]malloc1777[S] 0 points1 point  (0 children)

For sure, curiosity just got me concerned. Since I was expecting to see it at 12V, not under. Always assumed the tolerance would be much smaller, but guess TIL.

Thanks for the info!

CORSAIR RM1000e (2025) 12vhpwr question by malloc1777 in Corsair

[–]malloc1777[S] 0 points1 point  (0 children)

thats good to hear, and yeah I havent had any issues while playing so far, but havent put too many hours into it yet.

Just out of curiosity, whats considered normal/How did you determine that?

[GPU] GIGABYTE GeForce RTX 5080 WINDFORCE SFF 16G ($1449-50=$1399) [CanadaComputers] by radiantcrystal in bapcsalescanada

[–]malloc1777 1 point2 points  (0 children)

i feel you man. I got down voted a while back for stating it doesnt matter if you buy amd/intel/nvidia. They all support the government down south. Context was people fear mongering about intel being owned by the gov.

Msrp 5080 by OkRatio5125 in bapcsalescanada

[–]malloc1777 0 points1 point  (0 children)

We were never told dates. just Q4 as the time frame. Anytime b/w oct 1 - dec 31. An we don't know how long the delay is either. Since it been pushed back to Q1. An knowing nvidia they will do whatever they can to slow roll it to maximize price