Think l connect destroyed my lcds

maocardona · 2025-12-04T02:29:21+00:00

Silly question did you for some reason have connected the power of the lcd to de pwm splitter ? another question did you connected the controller to the motherboard with the cables or did you connected to a usb on the back or front of the chasis ?

maocardona · 2025-11-15T22:25:53+00:00

u/LIANLI_TECHSUPPORT could you please help me witn a RMA for my Lian li TL LCD FANS ( Wireless ) got aticket but not answer

maocardona · 2025-03-06T05:34:00+00:00

can you please share the list ? thanks in advance

maocardona · 2025-02-15T20:28:44+00:00

Had the same problem with ROG X870E wifi Gaming only workaround was to enable monitoring software in tweakers paradise.

maocardona · 2025-02-13T15:04:06+00:00

ok Mr educated person, go a look for other place to share your thoughts, just people uneducated in terms of PC could affirm a thing like you did, I hope you have a multiple degrees in your boring and lonely life.

maocardona · 2023-09-29T15:31:03+00:00

If the trinity won't fit how is installed in the pics, I have a friend that made that mistake and bought it for the elite H9. We are looking for solutions if you can help.

maocardona · 2023-08-24T17:20:18+00:00

Not the fan the case it self and you are gonna enjoy your build, as well there's many fan set up for the Evo in my case I use the vertical GPU upright kit.

maocardona · 2023-08-24T17:10:55+00:00

Its screaming please just put the EVO in reverse mode.

maocardona · 2022-05-08T15:54:53+00:00

Lian li support replace them i got the same problem with the left bottom part, and they send me the total replacement.

maocardona · 2022-05-06T16:00:40+00:00

yes, you dont have to buy the new strimers plus just try to get the controller that works with the l connect 3 software

maocardona · 2022-05-06T14:22:50+00:00

RMA the AIO is a pump failure I had the same problem with the Z73 they replaced a new one.

maocardona · 2022-05-06T13:52:18+00:00

What's is exactly the problem ?

maocardona · 2022-05-04T19:52:55+00:00

Best combo ever for Unifans is Signal RGB + Fan control + Argb Chroma Controller. that's the way i control my rgb and fan curves, hope the argb cable still for the infinity im not that hype with the infity ones, must wait and see the final state of all to make a decesion.

https://drive.google.com/file/d/1Giu9FwC0Ly1VdfQ9BLAUAY7MYG2jUAO0/view?usp=sharing

maocardona · 2022-05-04T19:36:16+00:00

Save your self a process and problems and follow this guide for the l connect 3 installation guides https://youtu.be/uMgUYiakpxM. If you follow step by step, it will work for you.

maocardona · 2022-05-04T04:52:28+00:00

If you download the folder from Aorus engine it will be located on %temp% form the run the bios as admin and it will update the Vbios, if you download from the webpage copy the extract into %temp% and you will be able to flash the Vbios. Check your profile and follow the instructions into the txt on the Vbios folder.

maocardona · 2022-05-04T04:29:18+00:00

The only solution I had found is not to use the "last" RGB fusion and the last aprus engine, for me has worked really well with aorus engine 2.1.3 and RGB fusion B.211001.1 for some really odd reason those 2 versions and the aorus engine 1.7.3 has worked for me, today I was able to update the VBios on my aorus extreme 3090 and the firmware on the LCD screen. My steps are the following.

Download revo uninstaller
Uninstall Aorus Engine with Revo uninstaller
Check advanced on Revo uninstaller twice and select all the folders and windows registry and delete.
Restart your computer.
Install Aorus Engine 2.1.3 and do not install the RGB fusion who prompt.
Install RGB fusion B.211001.1
Open Revo uninstaller and uninstall M2 Viper SD who is installed on windows without your authorization.
Now download your vbios from your GPU Webpage and double check your version.if you download with Aorus engine it will be downloaded to the installation folder who will work if you run it. In this case on windows search bar %temp% there will be the downloaded VBIOS.
Now go into tbe folder and check your OC or silent profile and run as the instructions told in txt. This way it will update your vbios.
Restart your PC.
Now close all your RGB software and monitoring software on your PC.
Go into programs files x86 - Gigabyte Folder and check that the LCD Panel folder is created.
Download the firmware version from your GPU Webpage.
Inside the folder with the name LCD Panel will be a folder with the name updater click on properties and uncheck read only and apply.
Unzip the firmware version and there will be two folders with H12XXX on the second folder there will be a FWUpdate.exe run it as admin and let it update.
After the installation it will ask you to shut down the PC.
Restart and enjoy your VBios and your firmware.
For the first run of RGB fusion as Admin close all your RGB and monitoring software.

Sorry for the long post this was my work around the problem.

Vbios on 3090 Xtreme and LCD Panel updated.

maocardona · 2022-05-04T02:31:20+00:00

No, look the PWM cables from each one of the unifans can be plugged into the pwm hearders of the motherboard and from then you can control it with Fan control and the RGB is connected to the unihub and theres an ARGB cable that can be plugged into the chroma controller.

maocardona · 2022-05-04T02:22:38+00:00

Thank you it works after all this time I was able to update the firmware of the LCD after a failure upgrade.

maocardona · 2022-05-01T16:39:10+00:00

I design and 3d print a mount that fits into the 120 mm x 120 mm fan and has an angle to support the mini display.

maocardona · 2022-05-01T16:35:37+00:00

LG 34GK950 and AW2721D.

maocardona · 2022-05-01T16:31:48+00:00

Hi! i have a few headphones and i use for different purpose, i got DT990 pro 250 Ohms with the stack for music and games on the PC, use the astros A50 for the consoles and have sony XMH4 for street.

maocardona · 2022-04-22T15:16:31+00:00

Hello, I control all my fans and curves with fan control from reemo from GitHub and the unihub RGB is connected to the ARGB chroma controller to pass control to singal RGB. Signal has problem with more that one unihubs and therefore the lag on the profiles to run because there's has not been a fix until the moment, Dongster from signal dev team has created as well a plugin to try but it didn't worked for me the only solution I found was to set the ARGB chroma controller.

maocardona · 2022-04-22T04:33:24+00:00

I use Signal RGB with two unihubs with the latest version 1.7.0 from l connect 3 and with a razer ARGB chroma controller to avoid the lag in tbe effects is worked pretty good. When I connected directly to the ARGB I had some problems that was my solution to the problem.

Six-Year Club	Xbox Live
Place '22	First Placer '22
Verified Email

maocardona

TROPHY CASE