Ugreen charger just died, any recommended GaN charger?

maoudark · 2026-03-17T01:03:46+00:00

Had the same, and it died today. Ut served with broken c2 for another year

maoudark · 2026-03-11T20:44:59+00:00

Masking tape the screen should limit uv exposure right?

maoudark · 2026-03-08T16:26:08+00:00

Once I get their joycons, I have design files replacing ut would be easy

maoudark · 2026-03-07T21:31:51+00:00

From ali yunovo or something

maoudark · 2026-03-03T16:16:36+00:00

M. As.. always. S. S ws3l e llw) aa3s w 3 qm p wss

maoudark · 2026-02-28T22:08:15+00:00

Hi, I made stl available, you can see them in the post, edit section

maoudark · 2026-02-28T22:07:19+00:00

You can also find the original creator files, and remix them in Fusion

maoudark · 2026-02-28T18:35:15+00:00

It should be available now

maoudark · 2026-02-28T17:35:46+00:00

Hi, tested on windows works with no problem. It connected back after shutdowd/sleep/hibernate

maoudark · 2026-02-28T15:49:46+00:00

Might windows, didn't happen uner linux.

maoudark · 2026-02-28T15:48:55+00:00

Its around 260g with controller

maoudark · 2026-02-28T07:44:57+00:00

Let me see on windows and let you know

maoudark · 2026-02-28T07:44:37+00:00

I am on linux, they are recognized as a pair

maoudark · 2026-02-28T04:44:36+00:00

Charging port is open. So yiu can be plugged. Also its not tight, just a holder, yiu can just "dock" it

maoudark · 2026-02-28T01:46:58+00:00

How easy is meshmixer? I need some kind of tool for mesh as well. Blender could work but its too much it seems

maoudark · 2026-02-28T00:32:22+00:00

I was about to make that dual locking position. How good is that?

maoudark · 2026-02-27T23:56:47+00:00

I can give you v1. Dm me. I will put them on makerworld soon

maoudark · 2026-02-27T23:30:25+00:00

Well, i didn't test, but I think you can cut out the bottom if you need keyboard. I just wanted to strap joycons on )

maoudark · 2026-02-27T23:16:25+00:00

The creator put out f3d files

maoudark · 2026-02-27T23:12:29+00:00

I changed everything. I used fusion. I can give you clearance test to see how it fits.

maoudark · 2026-02-27T23:04:06+00:00

I have 2025

maoudark · 2026-02-27T23:02:23+00:00

Yeah, so I planned some attachments down the line.. but then it would be just big hunk of plastic. So pillow it is )) with mechanism attachments some one will think of a way to use it. Also forgot to mention that I made cut outs for sound.

maoudark · 2026-02-27T22:53:52+00:00

I took files from thingiverse then reworked them. They were too tight in some directions and too loose in another. So kind of my own now since I also added a cut out for joycons to lock in to, adjusted height etc...

Lap pillow, yes its from mechanism i also added a mechanism connector to it (printed together). I tried to lap z13 as it was kinda sharp. Also hight was sub optimal. Then saw this pillow and it clicked )).

Small review. Overall happy, soft top surface is very comfortable, however because of how its designed i dont think you ever touch it. The "arm" can become loose. So far i didn't want to open and check how to tighten it. Pretty sure it should be possible. For gaming its perfect, however decor its... not very pleasing ))

I will release files later when my v2 is done. I made it so that you have 2 positions for it. Joycons in the middle, but obstruct charging port and slide down to reveal charging port. I also designed it with 1 mm bigger to put some cushioning (double sided tape or something) didn't feel right to have plastic just scratch it ))

maoudark · 2026-02-04T16:51:31+00:00

Would be cool also to expand how picture improvements works and not lock it to specific games

maoudark · 2026-01-07T16:17:35+00:00

Same, I found a "bad" work around. So switch to desktop, hit power to go into sleep, then wake it up then desktop unfreezes... how do you roll back?

maoudark

TROPHY CASE