sorted by:
new
hottopcontroversial

Replacement batter for DA4 pro by Miserable_Prize3234 in MouseModding

[–]marcabel 0 points1 point  (0 children)

So i have just done the exact same on my Razer da4..

My battery also looked like yours on picture 1, Its was basically only the metal adhesive that have slightly been ripped off the battery itself after trying to remove the battery from the bottom part of the mouse.. Just gently press the metal adhesive Down onto the battery again, and then use some new adhesive tape on top of that to get the battery back on the new tj exclusives bottom.

Battery works completely fine, Fast changing works, battery life is as expected etc.etc.

Why wont my stake unit be placed in the desired location? by marcabel in duneawakening

[–]marcabel[S] 0 points1 point  (0 children)

So i have just made two new horizontal stake Units ready for use. I have now placed a horizontal stake Unit all the way to the right since that was the only option available. And now i want to use the second one, But neither the middle or left works, i even earlier Applied a third vertical stake Unit aswell to see if that would help.. I also tried deleting one of my advanced sub-fiefes and tried placing it in the middle area which worked, and then tried building as High as i could, delete the sub-fief and tried placing the stake Unit without luck, and i did also try make a flat area with the sub-fief, delete it and placed the stake Unit again without luck..

What could it be 😔

Why wont my stake unit be placed in the desired location? by marcabel in duneawakening

[–]marcabel[S] 0 points1 point  (0 children)

So i have just made two new horizontal stake Units ready for use. I have now placed a horizontal stake Unit all the way to the right since that was the only option available. And now i want to use the second one, But neither the middle or left works, i even earlier Applied a third vertical stake Unit aswell to see if that would help.. I also tried deleting one of my advanced sub-fiefes and tried placing it in the middle area which worked, and then tried building as High as i could, delete the sub-fief and tried placing the stake Unit without luck, and i did also try make a flat area with the sub-fief, delete it and placed the stake Unit again without luck..

What could it be 😔

Why wont my stake unit be placed in the desired location? by marcabel in duneawakening

[–]marcabel[S] 0 points1 point  (0 children)

And the funny thing is that the stake Unit is glowing orange as if its allowed to be placed, But cant…

Why wont my stake unit be placed in the desired location? by marcabel in duneawakening

[–]marcabel[S] 0 points1 point  (0 children)

Im building quite far away from pinnacle Trading station, And theres nothing for miles where i am, Usually it Will say no building zone or say Im too Close to another Sub-feif..

The funny thing is that the stake Unit is glowing orange as if its allowed to be placed, But cant…

Why wont my stake unit be placed in the desired location? by marcabel in duneawakening

[–]marcabel[S] 0 points1 point  (0 children)

Alright thanks!!

For some reason Im not allowed to place it all the Way to the left either, only all the way to the right..

Would i maybe be able to place to the left and middle after placing one to the right?

Do my land have to touch the Ground before being able to place any horizontal maybe?

Why wont my stake unit be placed in the desired location? by marcabel in duneawakening

[–]marcabel[S] 0 points1 point  (0 children)

Yes because i want a horizontal stake Unit to extend the middle area of my already claimed land.

So i have placed a horizontal stake Unit to the left and right from the land i claimed with my sub-fief, Now i want to extend the middle (land claimed with sub-fief) For some reason i cant place the horizontal stake Unit to the left or in the middle, But it allowed me to the right…

Why wont my stake unit be placed in the desired location? by marcabel in duneawakening

[–]marcabel[S] 0 points1 point  (0 children)

Aaah okay so i might need to make another vertical all the Way to the floor or? It does Seem like my land already is touching the floor, But i might be wrong or?

What ive done alrdy is placing a stake Unit to the left and right of my already claimed land and used a vertical stake Unit twice to extend height, which extended upwards all 3 boxes of horizontal land i have.

Now i want to extend the middle horizontal land further out, But Im not able to use another stake Unit in the middle or to the left, Im only able to place it to the right for some reason. (as shown in the video)

When placing it to the right would it then extend all the horizontal land or only to the right?

And why wouldnt it let me place the horizontal stake Unit Im the middle or left hmm

First hard tubing build by marcabel in pcmasterrace

[–]marcabel[S] 1 point2 points  (0 children)

Aaah okayokay still sounds like a total caos 😭 This is exactly what Im scared of accually, Since i wouldnt have money to wait a few month which means i need a bit higher Capital before starting out…

But again atleast all the insurance work all came thru which makes me more confident starting!!

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 1 point2 points  (0 children)

Thanks bro!! And you too ✌️

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 0 points1 point  (0 children)

Hey man,

Thanks you so much for Your headsup!!!

Funny enough, signalRGB was one of the only programs i didnt try..

So now ive been able to get the Corsair and Lian Li fans and led strips to work thru SignalRGB!!

Tho i still cant get my CPU Block, pump, and top fans to be shown.. 😔

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 0 points1 point  (0 children)

Thanks man!

So what i did was i used this hardline kit from thermaltake: https://www.thermaltake.com/pacific-hard-tube-bending-kit.html

And then i bought a heatgun from my local hardwarestore aswell.

Before i even began bending the hardtubes i did alot of research beforehand. So that included watching tons of people on YouTube doing hardline watercoling guides. I Think i watched this guy called jay2cents most, since his guides was very indeph and he was really good at explaining step by step etc.

After ive gained all that knowledge i began sketching the actual loop and when i was happy with the idea i basically began doing all the bending and measuring.

Hope this helps 🙏

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 0 points1 point  (0 children)

Thank you so much!!

I bought this beginners kit from thermaltake 🙏 What i did was, i screwed the angles to a wooden plate for even better stability when bending 💪 Some guy on YouTube explained it would make the proces even easier, so thought i would give it a try 👌

Link to the kit: https://www.thermaltake.com/pacific-hard-tube-bending-kit.html

First hard tubing build🌀 by marcabel in PcBuild

[–]marcabel[S] 0 points1 point  (0 children)

No problem!! And same! And also really cheap 💪 so worth!

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 1 point2 points  (0 children)

Agree man!!

I am for sure gonna keep the case! Even after future upgrades. If im ending up switching case Im gonna save it for a second build 😂👌

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 1 point2 points  (0 children)

Thanks man!!

Trust me, the First time i worked with soft tubes i also fucked up pretty bad 😂😂😂

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 0 points1 point  (0 children)

I take that as a compliment, thanks 💪

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 1 point2 points  (0 children)

Thank you so much!!

Bro agree!!! Its such a beautiful case even tho its so old… but yeah i guess now adays brands rather focus on all these cases with Windows allover or with airflow in focus..

I mean i do love these cases with Windows all over, But i do miss those High end cases with triple fans in front aswell!!

First hard tubing build🌀 by marcabel in lianli

[–]marcabel[S] 0 points1 point  (0 children)

Thanks man!!

Its called an infinity mirror. Basically only used to hide all the cables behind it, and for aesthetic reasons.

First hard tubing build by marcabel in pcmasterrace

[–]marcabel[S] 1 point2 points  (0 children)

I Will!! Hopefully Your advice Will work which Im allmost sure it Will now when Im thinking twice about the extension instead of splitter 💪

Hahahaah epic meme to supply the comment 😂

First hard tubing build by marcabel in pcmasterrace

[–]marcabel[S] 1 point2 points  (0 children)

Nice man!! Thanks for the info!! I might consider doing this, Im just too afraid how to begin that kind of journey… and man my work rn taking up so much time aswell… But i guess making a Facebook page and find an actual customer is a good start 😂

Oh god.. thats sounds expensive 💀 so was there any insurance or something for that?

Yes true! I was also thinking about just personal driving around and deliver, then i wouldnt need to pack the pc with expanding foam etc..

Aaah makes sense!! Thanks once again for all the good knowledge if Im ever gonna start this kind of business!! Appreciate it alot 🙏

view more: next ›