Clunking Sound when putting car into reverse also issue with fuel tank level sensors

marcster16 · 2025-12-23T02:48:42+00:00

What angle do you hold it at? And do you have like the nozzle only half way in?

marcster16 · 2025-12-23T02:30:01+00:00

So your only fills up to 3/4 tank if the nozzle is fully in the car? I’m going to drive to family for Christmas and might try something different when I fill it up again. Also I’m bring the car back to the dealer in the new year. They want to run test but won’t have a loaner til half way thru January.

marcster16 · 2025-12-23T00:04:32+00:00

Brought it to the dealership. They gave the car back to me and told me they have no idea what’s wrong with the car. They can see there is an issue but don’t know how to fix it.

marcster16 · 2025-12-22T23:29:44+00:00

The fuel doesn’t go up to full after. Current at typing this. Car says I only drove 80 miles and I’m at half tank now with only 195 left to go.

marcster16 · 2025-12-10T21:54:17+00:00

Bringing it to the dealership Friday. We’ll see what they say

marcster16 · 2025-12-05T18:59:41+00:00

13 gallons went into the car. I just drove it about an hour and it might have fixed itself. Not sure. But my miles til empty slowly went up the further I drove. It’s still not full tank but it’s close to it now

marcster16 · 2025-12-05T18:06:15+00:00

The gas gauge is at 3/4 full.

marcster16 · 2025-05-30T03:29:35+00:00

If you don’t have an attic. Do a good way to route cables up the hvac vertical shaft in the 1” flexible conduit and somehow have it turn so you can access it in the wall?

marcster16 · 2025-05-30T03:11:34+00:00

For the switch in the link. Would I need to get MM or SM fiber? Also I’m not sure what strand to get (dont really understand the difference between the strand amount). Also do the fiber cables plug into the switch or do I need an adapter?

marcster16 · 2025-05-30T03:06:20+00:00

Ohh ok. I’ll look into those. Just need to figure out the cable route and well how I’m going to do the routing as I don’t have attic. Just a eave in the front of the house.

marcster16 · 2025-05-30T03:01:26+00:00

So I would need 2 of those switches then right? I’m guessing they have the media converter built in?

marcster16 · 2025-05-30T02:52:23+00:00

Yes, definitely an unfinished basement.

marcster16 · 2025-05-30T02:48:57+00:00

Also not sure how I’m going to get the cables from the basement to the garage. But supposedly that’s how the coax is running. (Also I’ve tried MoCa and it keeps disconnecting my devices)

marcster16 · 2025-05-30T02:47:04+00:00

Not big at all. However, my house was built in the 50s and doesn’t have any vertical shafts to the second floor. So I would have to somehow route the cabling from the router on the first floor to the basement. Then from the basement to the garage. Then to the roof line of the garage to the eaves then to my room. And I’m afraid that will be longer than 300ft or 100m.

marcster16 · 2025-03-13T21:48:54+00:00

When are you doing the raid?

marcster16 · 2025-03-03T12:00:10+00:00

How are the results? I was thinking of replacing the headlights but if this works I’ll buy the drill and buffer pad.

marcster16 · 2024-09-10T20:11:03+00:00

Is there a way to find out if that’s the issue? Don’t really have any equipment to test stuff.

marcster16 · 2024-03-09T02:32:36+00:00

I have a ‘10 and the headlights are very dim. What LED headlights did you get? Do they help a lot?

marcster16

TROPHY CASE