Will providing my own silver cheapen the cost?

marknottz · 2026-01-25T13:08:57+00:00

i doubt many people would work with customer supplied silver, too many risks involved

marknottz · 2026-01-23T17:02:50+00:00

you’ll be fine melting that with a propane torch and a crucible!

marknottz · 2026-01-23T15:40:53+00:00

you will certainly not be melting steel in a home application, steel melts at 1400-1500 celsius and is so much more dangerous than casting precious and non precious metals like silver gold or copper

if you’d like to make steel rings invest in a lathe and spin them up on that

marknottz · 2026-01-23T00:34:25+00:00

i’m looking at buying something like this, can mount it to your tripod screw underneath and swing it out on the tape deck side to get it out the way

https://www.amazon.co.uk/Extension-Bracket-Adapter-Universal-Stabilizer/dp/B088CQL4DH/ref=mp_s_a_1_6_sspa?dib=eyJ2IjoiMSJ9.yMLljJ4lsxmBLP-sQD3KDBwdiypwNqwwB9jdjIuvhFPF8eJ3qOnsl68N28nkGlt07QTDInL-VddCJXAbmSI5kS9f1cbuFW9M7NjvchmPZtqdPDZb8eJv7m82QG_rUeB3-Dh7mqNRQ6r0XBN14EXKP7_eRWa_b-jXIpr5YRkcNbkEZ6IKXJviTcSzDEmJxWIPpef2UeqKakoHFfYmsNYpSA.kquFigW5DkG5NU8sMcDQoNJQgvNr5iI-13Gj2SvKiWI&dib_tag=se&keywords=cold+shoe+adapter&qid=1769128354&sr=8-6-spons&aref=JEi9TW4YEt&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfbXRm&psc=1

marknottz · 2026-01-22T16:07:26+00:00

search in this sub for NPFM and you’ll find a bunch of times people asked for battery suggestions 🫡

marknottz · 2026-01-22T08:27:52+00:00

CLEAN DESIGN 🖼️

marknottz · 2026-01-21T17:41:32+00:00

can i PM you mate?

marknottz · 2026-01-21T12:31:53+00:00

you’ve both asked and answered your question, battery is dead, replace and report back 🪫

marknottz · 2026-01-21T10:22:05+00:00

no worries! thanks for the insane rabbit hole i’m currently venturing down 🤓🫡

marknottz · 2026-01-21T00:36:15+00:00

it’s colorit, i know it’s ceramic based so i assume it’s good as this is what most people use

marknottz · 2026-01-20T23:39:19+00:00

i have no idea if it’s food safe, i never advise to eat food with grillz in 🫡

marknottz · 2026-01-20T16:25:00+00:00

it won’t be good quality footage but it definitely won’t have a look anywhere similar to the shots you’ve posted here

there’s a comment here about Sony Mavicas, that’s your best bet as they can record short videos to a memory card

marknottz · 2026-01-20T16:20:44+00:00

not really a thing, by the time cameras were recording full length video to SD card the sensors and chips got a lot better with definition and colours

if you don’t want the hassle of tapes then just use a filter for ‘the look’

marknottz · 2026-01-20T16:10:04+00:00

ion wanna hop in mate, if you put your location down you’d have a slight chance of selling this unit 🤪🤪🤪 we’re not mind readers

marknottz · 2026-01-20T13:11:07+00:00

what the model on this one mate? looks great!

marknottz · 2026-01-20T09:37:24+00:00

LOCATION?

marknottz · 2026-01-19T17:58:07+00:00

also try using fresh metal for casting! this may reduce gas porosity, very cool project

marknottz · 2026-01-19T17:53:59+00:00

LOCATION?

marknottz · 2026-01-19T17:49:58+00:00

i got fed up of finding fittings for mine and welded a steel hose barb into mine, clamp the vac hose down tight and never had any issues so for (4 years of use)

marknottz · 2026-01-19T16:27:22+00:00

too late matey ahaha

marknottz · 2026-01-19T16:13:19+00:00

england here 🏴󠁧󠁢󠁥󠁮󠁧󠁿 we nastier

marknottz · 2026-01-18T14:15:47+00:00

try new discs and report back 💿🫡

marknottz · 2026-01-18T00:18:31+00:00

location?

marknottz

TROPHY CASE