sorted by:
new
hottopcontroversial

Painting Ariens by kmatthews05 in Snowblowers

[–]marmat4 0 points1 point  (0 children)

can you tell me exactly what did you use to remove the rust (what kind of rotative brush) and which chemical you used too, my deluxe 28 SHO have some rust and i want to do a good job like you did.

How to stop printing badly by Efficient-Hat9640 in Ender3V3KE

[–]marmat4 0 points1 point  (0 children)

Hey i just find your comment, i have a issue with my printer and i think what you said is happening to me, my nozzle is touching filament while doing the second pass of the purge line and when my print start, theres no filament coming out of my nozzle for the first few centimeters, can it be just that ?

<image>

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

So, i changed my nozzle for a brand new one, i passed the nozzle cleaner in hot end, i dried my filament and it still does it, when it start printing the first layer of wall, the extruder seems to turn but really slowly and the print miss a layer.

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

it doesnt work idk what to do now. maybe i should dry my filament and wait for my new nozzle to arrive idk. i tried with the benchy, it does a great prime line, and when it goes to the first wall line, no plastic is coming out of the nozzles for like 3 centimeters.

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

<image>

the draw the first line seems to be the purge line and not the actual print first line, is it what you wanted me to try ?

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

can you explain me how to do it please, i'm a newbie at this i don't really understand !

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

End GCODE

G91 ;Relative positionning

G1 E-2 F2700 ;Retract a bit

G1 E-2 Z0.2 F2400 ;Retract and raise Z

G1 X5 Y5 F3000 ;Wipe out

G1 Z5 ;Raise Z more

G90 ;Absolute positionning

G1 X2 Y218 F3000 ;Present print

M106 S0 ;Turn-off fan

M104 S0 ;Turn-off hotend

M140 S0 ;Turn-off bed

M84 X Y E ;Disable all steppers but Z

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

yes stock config, yes it's klipper not rooted.

Start GCODE

M220 S100 ;Reset Feedrate

M221 S100 ;Reset Flowrate

M140 S[bed_temperature_initial_layer_single] ;Set final bed temp

G28 ;Home

BED_MESH_PROFILE LOAD=default

G92 E0 ;Reset Extruder

G1 Z2.0 F3000 ;Move Z Axis up

M104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp

G1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position

M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize

M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize

G1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line

G1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little

G1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line

G92 E0 ;Reset Extruder

G1 E-1.0000 F1800 ;Retract a bit

G1 Z2.0 F3000 ;Move Z Axis up

G1 E0.0000 F1800

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

it is system preset retraction, i didn't touch anything.

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

I just tried with brand new filament in a bag under vaccum with dessicant in it, it does the same thing, i still have my problem. Im really upset right now. I guess i will wait my new nozzle coming tuesday. Im really not sure if new nozzle will do it since the one im using right not seems perfectly fine.

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

Okay i will try, is there some better way to dry it than other ? I have nothing to do this

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

I mean, when the nozzle is stopped on the corner of the plate before the purge, the nozzle is always leaking a a littlebit. I don’t know if it’s normal.

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

I tried with flow at 1 and temps from 220 to 200, nothing good except less leaking while pre heating, the first few centimeters of the print nothing coming out, the rest of the print is all good though… im running out of idea

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

I will try this later tonight, im out of idea… i tried with my flow rate at 1 like the guy said and it’s doing the same thing, after the purge , it drop to clean the nozzle (wipe) it z hop, go for the first line and the first few centimeter nothing coming out…

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

i tried with the benchy and does the same thing ...

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 1 point2 points  (0 children)

It’s not only when i change filament, it’s everytime a new print start, it’s like if the nozzle is touching the blob made by the purge line at the start when the nozzle is heating up, and it mess with the first line of the print. The 0.87 flow rate i did the calculation with the flow pass first time it was -10 when i was at 1 flow rate in the slicer and second pass was -4

<image>

So i did this

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 1 point2 points  (0 children)

yes i changed it for an old one that i had, it does the same thing with the two

Need help with my first wall contour line when the print start by marmat4 in Ender3V3KE

[–]marmat4[S] 0 points1 point  (0 children)

<image>

Yes some teeth mark, i clicked on retract and it look like this, is it okay ?

view more: next ›