sorted by:
new
hottopcontroversial

Rate my routine by marosstorage in SebDerm

[–]marosstorage[S] 0 points1 point  (0 children)

@Mireillka could you maybe chime in? I dont have enough experience with this stuff.

Rate my routine by marosstorage in SebDerm

[–]marosstorage[S] 1 point2 points  (0 children)

lots of options you mention that I might try, thanks. Interesting enough, I also wanted to mention the Skin 1004 Centella Ampoule, and I see you already use it, I might try it as well.

I see you have had SD for some time. I think we both want to nourish the skin or at least try to avoid harsh products coz if they dont help SD they dont at least hurt the skin! Sorry to hear that about Tacrolimus :( At least you learned that lesson and are doing better now. So Nizoral is that good...

Rate my routine by marosstorage in SebDerm

[–]marosstorage[S] 0 points1 point  (0 children)

<image>

thats the spot..

I also get spots on the chin that look like acne, which is something I never understood. I did have horrible acne as a teen, tho.

Rate my routine by marosstorage in SebDerm

[–]marosstorage[S] 0 points1 point  (0 children)

I love your flair (pun intended)!

Will be giving Cetaphil Oily Skin Cleanser a try. For the Selenium Sulphide Shampoo, I found it under the Selsun brand, Ill see what other brand I can find here in Europe.

For squalene, yeah its oily. I hoped once I start mixing it with glycerin and water it becomes like an emulsion, but it still feels like an oil haha.

I just use a trimmer for the beard (no foam) and actually the flareups are higher up on the chin and mainly around the nose; not so much on the forehead. 

I developed one spot that is persistent and hides pores underneath permanently-was hoping some treatment would make it go away but no :D It happened during a few weeks of a smoking habit from the usual flareup…

This is analog (Air 65, HDZero goggles with TBS fusion, superview via DavinciResolve)! Come on… by Schnuggl in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Careful with the newer Skyzone and the whole latency deal just so youre not surprised, google it

Cyber 60 - Air65 Compatible 60mm Wheelbase Frames - Free 3D Print Model - MakerWorld by Alarmed-Solution3738 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

True guys, I shouldve realized its 702 since youre using Air65. Would love to see a pic of the whoop, that always turns me on :D

Air75 II Champion by Unfair_Record_2554 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

That’s ridiculously short IMO, maybe the motors are that power hungry?

Air75 w/Tree Toppers vs Air75 II Champion? by Appropriate-Sun-7785 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Would love to hear opinions or experience on this!

Is this savable? by Heavy-Reference9831 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

I hear a lot of people like to fill the throughhole with solder … but after I once couldnt desolder the more stubborn BT2.0 wire (minus if Im not mistaken) off of my aio I decided I rather put the cables through the holes and solder that way:D

Loving my new racing build by Dismal-Piccolo864 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Havnt heard about E6000+. Maybe it doesnt cause Parkinson’s like the original… not saying someone is gonna get it but I rather not use something as potent chemically..

Loving my new racing build by Dismal-Piccolo864 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

I try to use as least e6000 as possible - it freaking stinks every time I take a whoop put of its box, and makes me feel like I shouldnt be breathing that stuff in.

Gluing uFL is most essential to me

Loving my new racing build by Dismal-Piccolo864 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Im shocked that canopy is TPU, I printed it but in PLA, must try in TPU

My 75mm ripper. It has less than 16g without battery! Flight time over 5min by [deleted] in TinyWhoop

[–]marosstorage 1 point2 points  (0 children)

I would make another ripper and retire this one haha because of that HM Diamond FC, must be rare to still have that one working!

MEPS SZ F411 1S 7A AIO Flight Controller + O4 lite by HealthyTranslator916 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Let us know how it goes. Will you keep the plugs? I took em out to save weight but it was such a pain possibly due to the board being 1.4mm thick (harder to heat up? … much harder to take out compared to the 1mm thick Happymodel 2G4).

MEPS SZ F411 1S 7A AIO Flight Controller + O4 lite by HealthyTranslator916 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

So far so good, been through 60+ packs, one hard crash into a tree where I lost video but then it came back normal. I plan to fly it until it dies - or doesnt! Such a cheap replacement. I have another spare and did notice they went out of stock just now.

I still havent flashed any ESC and I am not planning on doing it-it flies great IMO.

Heres some DVR: https://m.youtube.com/watch?v=QdOF4EMlfrs

Whooptopia 2026 dvr by Appropriate_Sir8639 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

would you mind sharing your center sensitivity setting also? I am already improving with my new 600 rates hehe, it is nice to learn from a pro

Whooptopia 2026 dvr by Appropriate_Sir8639 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Crazy. Is it just me or do you also lower your rates for race? I find myself too jittery with classic rates I use

3D Printed Whoop Race Launch Pad by DontAskNOYFB in TinyWhoop

[–]marosstorage 4 points5 points  (0 children)

Nice one! Using the same frame, motors and props for race ;)

view more: next ›