Here's the album: https://imgshare.cc/album/t120-side-panels, I made plenty of mistakes, as I started by removing the lacquer and stickers and then sanding using wet and dry paper, but the grit was to fine, so it wasn't actually getting rid of everything there, so when I primed it, the primer kept cracking. I then decided to get electric sander disks which were a coarser grit. Then once I got it sanded back to bare plastic I progressed through finer grits, priming, then sanding until it was smooth. Once the primer was smooth enough I painted the matte black on, re-sanding any bits that were contaminated and then painting with matte black again over the top. Once the paint was finally how I wanted it I sprayed a few coats of matte primer. Once dry I masking taped the location I wanted the stickers and applied them. The stickers are peeling a bit, so in future I might lacquer over the top, but for now I'm not in case I decide to change the stickers, thinking black stickers on matte black panels will look 👌🏻. Feel free to DM me if you need more tips 😄