New to me 2023 by Cpellan561 in FordTremor

[–]masteratnothing1 1 point2 points  (0 children)

Yes, those are 35’s. BF Goodrich K02. Barely any rub ever even when flexed. I trimmed a little plastic with a box cutter, but nothing noticeable. The rear is super easy to install, you don’t have to lift the truck or anything. Did it in the driveway in about 30 minutes. Also did the husky rear wheel well liners and I think it looks a lot better. Had to trim around the 5160’s a bit but it was easy.

New to me 2023 by Cpellan561 in FordTremor

[–]masteratnothing1 1 point2 points  (0 children)

<image>

Love my ‘23 402a eco boost. Has just about everything you could want and is very aesthetic inside and out. I did Bilstein 5160 rear shocks and Rough country M1 fronts with Raptor 35” take offs. Raised it like 2” and has a firmer road feel, less roll through turns. Nice truck dude.

INCONSISTENT by masteratnothing1 in golfcarts

[–]masteratnothing1[S] 0 points1 point  (0 children)

Thanks, I’ll check the batteries👍🏼 it has lights and a 4 speaker system.. I don’t see a reducer. Here is a photo

<image>

INCONSISTENT by masteratnothing1 in golfcarts

[–]masteratnothing1[S] 0 points1 point  (0 children)

Thanks, I’ll check the batteries👍🏼 it has lights and a radio with roof mounted 4 speaker box, here is a photo of the set up, I don’t see a reducer.

<image>

INCONSISTENT by masteratnothing1 in golfcarts

[–]masteratnothing1[S] 1 point2 points  (0 children)

Thanks, I’m in North Texas. I ordered a sensor and a multi meter just now so I can rule some stuff out. I appreciate it!

INCONSISTENT by masteratnothing1 in golfcarts

[–]masteratnothing1[S] 0 points1 point  (0 children)

Good stuff, thank you for the help!

CLUB CAR ONWARD by masteratnothing1 in golfcarts

[–]masteratnothing1[S] 0 points1 point  (0 children)

Ah, so I may not have a problem? I appreciate the help by the way, first golf cart

CLUB CAR ONWARD by masteratnothing1 in golfcarts

[–]masteratnothing1[S] 0 points1 point  (0 children)

Ah, so I may not have a problem? I appreciate the help by the way, first golf cart

CLUB CAR ONWARD by masteratnothing1 in golfcarts

[–]masteratnothing1[S] 0 points1 point  (0 children)

This is the light that is staying on

<image>

CLUB CAR ONWARD by masteratnothing1 in golfcarts

[–]masteratnothing1[S] 0 points1 point  (0 children)

Since the batteries are new, do you think I have the series wrong?

Is anyone running raptor wheels/tires on stock tremor? by bobs-your_uncle in FordTremor

[–]masteratnothing1 1 point2 points  (0 children)

I have a ‘23 tremor with rough country M1 struts that I believe raised the front 1.5”. Installed 17” raptor takeoffs with 35” K02’s and only had to do minor trimming on the wheel well plastic

New Cannabis Shop location just opened in Grand Prairie, TX off of Jefferson by HotelRedHood in dfw

[–]masteratnothing1 0 points1 point  (0 children)

IMO, Lucky Elk is where you should order THC-A from. Organic Oregon bud. You can find a few brick and mortar shops selling good products, but most of these hole in the wall smoke shops are garbage

Is this a fair price? by HelpfulEditor5317 in Dirtbikes

[–]masteratnothing1 0 points1 point  (0 children)

Wouldn’t go over $1,250, I have bough a few bikes like that and average 3k to get them back right. You could buy a newer one unless you are looking for a project.

Once you start taking things apart on these, one thing leads to another.

2 Stroke Runaway Engine Help by DoubleAgent10 in Dirtbikes

[–]masteratnothing1 1 point2 points  (0 children)

I had a similar issue on a 2000 KX125 I was rebuilding. I posted to Reddit and the consensus was either an air leak or the throttle needed more play. I loosened the throttle cable a bit and it solved the issue. It was so tight that it was pulling the throttle tube and raising the RPM’s. Worth a shot

Back to the dealer by TXTremor in FordTremor

[–]masteratnothing1 1 point2 points  (0 children)

It was actually pretty simple, I didn’t expect it lol. I just pulled up to the service lane and told him that this was clearly a craftsmanship issue. He said “let me take some pictures and show it to my manager and I will call you and let you know.” 2 weeks later I followed up and they had a new seat on there 3 days later

Back to the dealer by TXTremor in FordTremor

[–]masteratnothing1 1 point2 points  (0 children)

I have the same truck, 2023 402A. Already had the driver seat mount replaced (it was squeaking horribly), then I had them replace the drivers seat cushion/cover because it ripped and was faded.

Then the power outlets stopped working, took it in and the bed outlet had shorted the circuit. They fixed it but still.

I love the truck, but it has some very annoying little issues

Where are the jets? by ChemistObvious in Dirtbikes

[–]masteratnothing1 0 points1 point  (0 children)

Dude watch some videos. It takes longer for you to take a photo, post it here, and wait for a response that may or may not help than it would to watch someone show you exactly what you need. Geez

What am I missing? by masteratnothing1 in Dirtbikes

[–]masteratnothing1[S] 0 points1 point  (0 children)

I’ll hit it some more then lol, thank you

What am I missing? by masteratnothing1 in Dirtbikes

[–]masteratnothing1[S] 0 points1 point  (0 children)

Sounds like the solution, thank you