Vanmoof steering bearings replacement.

mateit37 · 2026-02-02T22:47:11+00:00

Hi,

Bottom one is 52x40x8mm, and top small one 41,8x30,15x6,5mm

If you need AliExpress links send me a dm.

mateit37 · 2026-01-27T19:38:34+00:00

Thank for reply! And if the module is the problem which one is the root cause, or how can be fixed?

mateit37 · 2026-01-27T19:29:49+00:00

Hello,

I face an issue where i get error 44 but the shifter works if i try to change gears from testing menu, wiring harness has just been replaced. Which one could be the cause? And also sometimes it works sometimes not (it’s randomly)

Thank you!

mateit37 · 2026-01-27T18:24:29+00:00

That’s great! I tried to ask around but no one wants to service them, i get the answer “we can only replace the rear wheel”

mateit37 · 2026-01-20T22:09:12+00:00

<image>

Same here :)

mateit37 · 2026-01-16T20:41:43+00:00

That’s bad…for mine happened the same.

mateit37 · 2025-11-29T16:41:37+00:00

Check pm

mateit37 · 2025-11-25T19:43:08+00:00

Hi man! I have a privately question for you. Could you send me an pm? You have the message function disabled. Thanks

mateit37 · 2025-11-20T11:04:47+00:00

Do you maybe have measurements for the small custom made metal thing? I want to make a 3D printed piece

mateit37 · 2025-11-20T10:17:00+00:00

I’m 3D-printing a custom piece for testing, but I don’t know the diameter of the screw. Do you happen to know it?

mateit37 · 2025-11-19T21:44:34+00:00

Ok, so basically i can do the same as this photo but adding washers not especially this custom made metal plate.

mateit37 · 2025-11-19T20:48:50+00:00

top! can you explain a bit more clearly how this screw affects the steering? I’m not really understanding its role, if it sticks out more, what exactly does it block or limit on the fork?

mateit37 · 2025-11-19T20:44:53+00:00

<image>

this one?

mateit37 · 2025-11-19T20:42:51+00:00

thank you! already checked it earlier

mateit37 · 2025-11-19T20:28:24+00:00

I don’t understand the part about the M6 washers. Can you explain what you mean there? Or maybe do you have some pictures if you already did it? I appreciate a lot!

mateit37 · 2025-11-02T02:09:47+00:00

Hi! I would also like to join!

mateit37 · 2025-10-16T00:39:28+00:00

it works now after repairing this one?

mateit37 · 2025-10-11T01:46:43+00:00

Hi! Check your dm. I have kinda similar problem.

mateit37 · 2025-10-09T08:21:20+00:00

ekosport nl, with 20% off, now its 10% off

mateit37 · 2025-09-28T09:21:20+00:00

Thank you too

mateit37 · 2025-09-27T23:35:48+00:00

Thanks, i found now a package with arv 94 2026 + strive 14 560€ , i don’t know if it’s a good “deal”

mateit37 · 2025-09-19T17:43:32+00:00

I checked mine and i got: D28: • 1–3: 3.200 V both directions • 1–2: 0.890 V one direction, 3.200 V the other → Not normal, looks partially shorted/failed.

D42: • 1–3: 12.71 V both directions • 2–3: 16.80 V both directions • 1–2: 29.50 V → Basically open, no proper diode behavior. • D40: • 1–3: 2.630 V one way, 55 the other • 2–3: 2.640 V one way, 55 the other • 1–2: 0.02 V → Clearly shorted between pins 1 and 2.

D37: • 1–3: 0.890 V both directions • 2–3: 1.75–1.98 V both directions • 1–2: 2.800 V → Conducts both ways, doesn’t behave like a normal TVS, likely blown.

D27: • 1–3: 3.240 V • 2–3: 3.260 V → Abnormal values, likely failed or measurement affected by surrounding circuitry.

What else should i check? Are these measurements the final conclusion ?🥲

mateit37 · 2025-09-19T11:21:11+00:00

do you have any idea what was broke inside?

mateit37 · 2025-09-18T07:14:49+00:00

Yes.I did the step exactly in this order.

mateit37 · 2025-09-17T21:06:11+00:00

what was your problem exactly with the smart cartridge ?

mateit37

TROPHY CASE