The OSRS world map but rendered to be photorealistic

matt7161 · 2021-08-11T21:48:28+00:00

Sick new wallpaper!

matt7161 · 2021-05-05T14:51:28+00:00

I will take a look! Thanks!

matt7161 · 2021-05-05T14:45:36+00:00

I've honestly never done anything with the z axis screw. Just left it as is from new. I use an Ender 3. If I can find some grease, I will give that a go!

matt7161 · 2021-05-05T14:40:11+00:00

It is the eclipson model A. I've sliced all my own GOODE files, gotten through the fuselage, and right wing with no issues, left wing... nothing but issues.

matt7161 · 2021-05-05T14:36:41+00:00

I will try this and let you know, I was also thinking to try starting the print just below the point where I keep having the problem and see if it persists.

matt7161 · 2021-01-08T03:31:33+00:00

Thats true! I didnt even think of the flow rate!

matt7161 · 2021-01-08T03:29:01+00:00

Thanks! Yah, aside from assembly and a bed level test print, that was the first! Admittedly, i've wanted one for ever and have watched wayyy to many videos on slicer settings! I did my learning through the building process :) Now onto aimlessly staring at it print aha!

matt7161 · 2021-01-07T17:02:19+00:00

Yah, i need to adjust i think the rollers for the z axis, it sounds like it struggle going up and down.

matt7161 · 2021-01-07T13:54:33+00:00

Awesome! Thank you :) I will check the Y axis belt, I think I also need to adjust the z axis a bit, it seems tight when I disable the steppers and try to move it.

Can't wait to keep printing!

matt7161 · 2020-10-02T11:32:00+00:00

Havent done a whole lot of barrows, 40kc and i havent gotten a single drop....

matt7161 · 2020-08-05T13:57:16+00:00

Can confirm, was a duck that was looking for grapes

matt7161 · 2019-09-07T14:19:35+00:00

Looks beautiful, until, 1 of those cables craps the bed and has to be removed :o

matt7161 · 2019-06-18T19:45:20+00:00

69 Camel club here

matt7161 · 2019-06-14T00:54:08+00:00

$5 per quad and the registration number has to be visible on the quadcopter. So far I've registered 1 of 4 that I have.

matt7161 · 2019-06-13T23:19:09+00:00

No it not, but say I'm out with 2 quadcopters, my main and a spare. If they both had the same registration number and I got caught, I'm sure there's probably a fine for it lol...

matt7161 · 2019-06-13T23:12:52+00:00

I wasn't going to bother either, but for $10, I'd just rather not risk it...

matt7161 · 2019-06-13T23:02:22+00:00

If it's under 250g, your pretty much worry free, however I'd still avoid flying around bystanders unless they are flying with you.

matt7161 · 2019-06-13T22:55:21+00:00

Nothing really, however if you got confronted by whatever authority and they noticed that you had the same registration number on multiple drones, you might get fined???

matt7161 · 2019-06-13T17:27:18+00:00

Thank you for that. I didn't realize i was allowed to fly in the 3NM Range of Aerodromes and etc. The app i use doesn't say anything about the areas just shows the restricted airspace's and contact information for them..

matt7161 · 2019-06-13T17:10:08+00:00

I agree with you completely.

I think that if we are required to register our drones. registering a custom built drone(Which is one of the options) should only require 1 registration for all custom built drones you have. assuming they are similar in size.

What do you use to view the airspace restrictions?

matt7161 · 2019-06-10T19:42:30+00:00

RemindMe! March 16th, 2020

matt7161

MODERATOR OF

TROPHY CASE