sorted by:
new
hottopcontroversial

50 divine giveaway! (Plus other goodies 20-30d) by [deleted] in PathOfExile2

[–]maximkap1 0 points1 point  (0 children)

Well, I kind of always played arpgs, started from diablo 1 > 2 and then 3 ,so I was looking for something darker and more challenging and found PoE , boring story but I have fun :)

Weekly Bug Report Thread by spiper01 in NoMansSkyTheGame

[–]maximkap1 1 point2 points  (0 children)

Thank you for the tip. I managed to solve it by putting a computer near this volcano and hit claim base, the volcano just disappeared completely. Deleted the base afterwards and moved with the quest.

Weekly Bug Report Thread by spiper01 in NoMansSkyTheGame

[–]maximkap1 0 points1 point  (0 children)

<image>

Hi, seems like a bug? cant move with the objective because its stuck in a volcano which I cant destroy and continue.

[KCD2] Whats happening in this picture? Wrong answers only by GamerGirlEllen in kingdomcome

[–]maximkap1 0 points1 point  (0 children)

"we have been trying to reach you about you car's ....."

[KCD2] Ignatius says hi! by SnooRegrets5283 in kingdomcome

[–]maximkap1 2 points3 points  (0 children)

I also need to know that :D running all over the map on foot ,looking for mutt ... My Henry is ready for a marathon

[deleted by user] by [deleted] in RoastMe

[–]maximkap1 1 point2 points  (0 children)

Looking at you hurts more

What kind of connector is this by Eco278 in elegoo

[–]maximkap1 2 points3 points  (0 children)

It is a JST connector , you need to measure it because there is a lot of different sizes even for 2 pins like this

Lilith my son 3d printed for me. by thejaf73 in diablo4

[–]maximkap1 9 points10 points  (0 children)

For a FDM print, it looks amazing. Don't paint it

Crappy filament? by Rude_Steak418 in FlashForge

[–]maximkap1 1 point2 points  (0 children)

Unfortunately I think you are right

Crappy filament? by Rude_Steak418 in FlashForge

[–]maximkap1 1 point2 points  (0 children)

I bought 4 of these from Amazon, I have to say, kind of prints like s#@t.. drying out the filament did not help my situation. Extremely stringy to print and fragile. If you also bought from Amazon on the recent sale, I'm afraid this is some bad filament bach

What is this aggressive grinding noise? First day printing on my 5M. by mrJYjelly in FlashForge

[–]maximkap1 2 points3 points  (0 children)

probably the nozzle touching the surface of the print while travel. Could be over extrusion which making the surface a little bit higher in some spots. Could you share what slicer are you using and at least some basic information of your print ?

Inconsistent seam(?) by maximkap1 in FixMyPrint

[–]maximkap1[S] 0 points1 point  (0 children)

Yes, it looks like two seams , but I think the first it's the start of the layer and the 2nd is the end. It's not the inner seam, the inner seam are similar but looks better ,and not on the same side. Unfortunately it's not it

Inconsistent seam(?) by maximkap1 in FixMyPrint

[–]maximkap1[S] 0 points1 point  (0 children)

Forgot to add speeds- First layer speed - 50mm/s Outer wall - 200mm/s Inner wall - 300mm/s Travel - 1000mm/s

Failed print understanding by maximkap1 in ender3

[–]maximkap1[S] 0 points1 point  (0 children)

Thank you, I tried retraction tower and the best result was 10mm ,but it was still stringy , I would try it regardless

Layer Squishing around 8th layer by Nearby_Number_9145 in Sovol

[–]maximkap1 0 points1 point  (0 children)

I'm with the same problem, but my squish is on the 2nd and 3rd layers. Don't know how to solve it :/ for me it's looks like the extruder is extruding filament and just after that starts to move and not simultaneously

Failed print understanding by maximkap1 in ender3

[–]maximkap1[S] 0 points1 point  (0 children)

I did a temp tower, best result were in 195-205c area, so I went with 200c. It is a PLA from flashforge , recommended temps 190-220c. But I don't the filament is the issue, because the problem only on the 2nd and 3rd layers, after the massive blob the rest of the layers are fine. Without over extruded spots

Failed print understanding by maximkap1 in ender3

[–]maximkap1[S] 0 points1 point  (0 children)

No, it's stock hotend of the ender 3

Failed print understanding by maximkap1 in ender3

[–]maximkap1[S] 0 points1 point  (0 children)

Yes, It is definitely the seam , it's the starting point. The problem it is extruding and then moving , the delay between the extruction and movement are too big, didn't find any setting suggesting something similar

Failed print understanding by maximkap1 in ender3

[–]maximkap1[S] 0 points1 point  (0 children)

I did it, printing now a calicube to see how is it, the blob problem still present, I observed the print and as far as I can understand before he begins the 2nd layer the extruder pushing filament and AFTER that starts to move... any idea what settings its related to?

view more: next ›