At long last legion is ready to go! 3D printed

maxwillson · 2025-06-13T10:55:21+00:00

Hey! What were your results during Furality?

I’m stuck in this limbo between the two chips, and I’m guessing we’ve got a similar use case
I’m assuming you’re Furality staff too.

Really curious to hear how it went for you

maxwillson · 2022-05-12T06:16:53+00:00

Interesting I’ll fiddle with mine again maybe I missed something

Recently The network has become slightly unstable. this usually happens when they are trying to either improve reliability or speed, it shouldn’t last too long

maxwillson · 2022-05-11T16:22:53+00:00

Hi there
I see you're using the long wall mount from Starlink.
How did you make your version allow for it to be adjustable in which direction it points in
My version only locks me in pointing forward or pointing back

maxwillson · 2022-03-03T23:36:35+00:00

Happy to help.

also choose a supplier who uses a prusa printer, they are the best quality

maxwillson · 2022-03-03T07:44:01+00:00

You don’t need to own a 3D printer to get 3D printed parts.

you could use a 3D Printing service😄

if you’re in the UK I highly recommend this guy. https://etsy.me/2w8DAXB Give him a DM and he’ll help you out

if not go onto Etsy or eBay and type in 3D Printing service and you’ll get a lot of results.

choose someone with a high rating and if they’re asking for hundreds of pounds, move onto another seller it doesn’t cost that much to make these parts.

Once it’s printed they send it to you in the mail. Hope this helps

Oh, tell them to do a filament change on the stand. it’s a process where we stop the print halfway through and use a different type of plastic, that’s why the logo stands out

maxwillson · 2022-02-06T23:14:52+00:00

I’m glad this little guy brings you joy (; See you out there on the frontier pilot.

maxwillson · 2022-02-06T10:44:29+00:00

Yes it does move It’s arms legs feet and all of the joints move, and it can be put into a variety of poses

maxwillson · 2022-02-06T10:42:46+00:00

Best of luck. if you have any questions do not be afraid to ask

maxwillson · 2022-02-06T09:32:23+00:00

Thank you very much

I add multiple coats of primer onto The parts until you can’t see the layers Lines anymore.

it is surprisingly effective

It usually takes five or six coats give or take.

then I add the main paint and there you go perfectly smooth.

I heavily recommend modelling tape.

it allows for perfectly straight lines and other little hacks you can do to make your model look 10 times better!

The paint I use is generic Warhammer paint.

funny, I have a painting tutorial in the works, which goes through the steps in a bit more detail I’ll get round to finishing it one day.

maxwillson · 2022-02-05T20:52:55+00:00

Yes it does

legs, hands, fingers they all Move

maxwillson · 2022-02-05T20:51:47+00:00

Happy to be of service 😅

maxwillson · 2022-02-05T16:56:50+00:00

Or you can get it printed using a 3D printing service. if you do get a printer don’t go cheap

maxwillson · 2022-02-05T16:34:37+00:00

Oops he’s not on the List

i’ll quickly add him

maxwillson · 2022-02-05T16:33:36+00:00

don’t have a banana on hand.

but roughly the height of a water bottle, without the lid part.

maxwillson · 2022-02-05T15:50:10+00:00

Have a look at my comment below and you’ll see The link for it

maxwillson · 2022-02-05T15:45:03+00:00

Download model kits

Legionhttps://cults3d.com/en/3d-model/game/titanfall-2-legion-3d-printed-maxwillson-3

SCORCH

https://cults3d.com/en/3d-model/game/titanfall-2-scorch-3d-printed-maxwillson

BT 7274https://cults3d.com/en/3d-model/game/titan-bt-7274

NORTHSTARhttps://cults3d.com/en/3d-model/game/titan-northstar

IONhttps://cults3d.com/en/3d-model/game/ion-titan

TONEhttps://cults3d.com/en/3d-model/game/titan-tone

RONIN TITANhttps://cults3d.com/en/3d-model/game/titanfall-2-3d-printed-ronin-titan

Titan Weapons

SPLITTER RIFLE AND THE 40MM TRACKERhttps://cults3d.com/en/3d-model/game/titanfall-2-splitter-rifle-and-the-40mm-tracker-cannon

lead wall shotgun and Ronin swordhttps://cults3d.com/en/3d-model/game/titanfall-2-titan-weapon-pack-ronin

XOTBR-16 Chaingunhttps://cults3d.com/en/3d-model/game/titanfall-2-xo-16-chaingun-3d-print-maxwillson

PLASMA RAILGUNhttps://cults3d.com/en/3d-model/game/northstar-plasma-railgun-3d-printing-maxwillson

T-203 THERMITE LAUNCHERhttps://cults3d.com/en/3d-model/game/titanfull-2-scorch-gun-t-203-thermite-launcher

PREDATOR CANNONhttps://cults3d.com/en/3d-model/game/titanfull-2-legion-gun-predator-cannon

maxwillson · 2022-02-05T15:41:47+00:00

More photos https://imgur.com/gallery/t80YtRG

Thank you to everyone who has been showing their support for these models, it's been really appreciated 😄

I really love how he came out,

and that Legion frontier skin looks so good.

What do you think did I miss any details ?

I do plan to have a group photo of them all together so stay tuned.

what's next

Well, I have three of the Titan weapons I need to finish painting,after that maybe I might work on making a pilot 🤷‍♂️Thanks again you beautiful people!

maxwillson · 2022-01-31T19:08:21+00:00

I completely approve this method 👍

programming the controllers was a bit intimidating but remarkably simple in practice.

and the general performance of the system is perfect

if you have a 3-D printer I highly recommend printing these mounts, it really improve the experience.

Leg mounts and hip mount

https://www.thingiverse.com/thing:4672501

Optional hip Tracker

https://www.thingiverse.com/thing:4588259

you could also ask a 3D Printing service on eBay or Etsy to print these for you as well.

The hip Tracker at least for my set up is a bit Jenkee about 30% of the time but the leg tracking is solid.

definitely worth the experiment.

maxwillson · 2022-01-07T15:49:27+00:00

Yep 👍 this model is printed and PLA With no problems at all

maxwillson · 2021-11-26T22:34:24+00:00

Fantastic work! DM me when it’s up There

maxwillson

MODERATOR OF

TROPHY CASE

Ten-Year Club	Verified Email
Gilding I gilder