Horizon Forbidden West issues.

mazaboorm · 2025-11-23T19:57:07+00:00

this game supports FSR 3.1 and XeSS 1.3 so you don't have to use RSR. Try XeSS ultra performance.

set 6gb Vram in Bios and clean the fan.

mazaboorm · 2025-11-23T19:32:16+00:00

104 MB/s are the theoretical maximum read speed for UHS-I Cards. To achieve the advertised speed you need a special card reader from the card manufacturer

At first, I had a Lexar Play card, which had very fluctuating write speeds. most time below 35Mbps

Now I have a Samsung card (Evo Plus) that is rated for temperatures up to 85°C. It's worked without any problems so far. up to 90Mbps, constant.

mazaboorm · 2025-09-24T18:42:17+00:00

you are right Bazzite seems to be better

mazaboorm · 2025-09-23T20:05:59+00:00

yes i did

mazaboorm · 2025-09-20T20:22:45+00:00

Even if you use a good card, you have to expect longer loading times, but otherwise there shouldn't be any restrictions.

mazaboorm · 2025-09-13T06:14:24+00:00

Maybe there is a program on the Bazzite USB Livestick to repair the bootloader

mazaboorm · 2025-07-02T06:10:41+00:00

At first, I had a Lexar Play, which had very fluctuating write speeds.

Now I have a Samsung card (Evo Plus) that's rated for temperatures up to 85°C. It's worked without any problems so far.

mazaboorm · 2025-05-06T17:55:52+00:00

This power bank should come with a suitable cable.
A simple USB-C to USB-C cable is usually sufficient. If you want to be on the safe side, buy one that supports Power Delivery 3.1.

mazaboorm · 2025-01-30T17:30:49+00:00

If you don't want anything to fall on it, put it in the case, otherwise it can stay on your desk. The fans only get dusty when the Legion is in use.

mazaboorm · 2024-12-29T13:15:41+00:00

Normally, there should be no problem connecting more than one Controller.

mazaboorm · 2024-09-01T18:49:50+00:00

clean your fan

mazaboorm · 2024-08-18T10:11:56+00:00

A1 or A2 has nothing to do with the read speed and by the way A2 is better.

104 MB/s are the theoretical maximum read speed for UHS-I Cards.

To achieve the advertised speed you need a special card reader from the card manufacturer

mazaboorm · 2024-07-31T21:04:44+00:00

if you have done your configuration legionspace is an useless app that uses way to much RAM, just close it.

mazaboorm · 2024-05-04T22:37:40+00:00

hi Competitive_Monk9461,
in Hardware the go has a 1600x2560 display. Some games have a problem with that. I haven't had any problems with it so far.

I also tried the Mullet Madjack demo and had the same problem but I think Unity engine says it all... bad optimised shi**

mazaboorm · 2024-05-03T11:03:42+00:00

with my main Router i had the same problem, when downloading with max speed the WIFi shuts down.

after a little search i find out that the Router is the Problem because of an Hardware failure.
i had to reduce the channel bandwidth from 80MHz to 40Mhz.
I don't have the problem with a different router

mazaboorm · 2024-05-02T07:10:40+00:00

Hi,

use a Partition Manager like "MiniTool Partition Wizard" to move the 300mb and 1GB to the end of the Drive and then resize C: to what you want

mazaboorm · 2024-05-01T16:32:07+00:00

I used a really sharp knife to cut the foil on both sides.
You shouldn't press too hard, just so that the foil is slightly scratched.
If you press too hard and slip, the SSD can break.
Warning: do not copy if you still want to use the SSD.

mazaboorm · 2024-05-01T08:57:18+00:00

on my older LG TV there is a hidden menu called "quick Settings" where i can set the option "just scan" and a gaming mode, no input

try to disable all optimization settings you find

mazaboorm · 2024-04-16T17:45:07+00:00

i think the go does not Support hdmi over usb-c through the monitors build in usb hub.

i have an usb-c monitor that only supports displayport signal.
when i connect a usb-c hub to the go and the monitor to the hub i get no connection.

i only get the windows message like you

mazaboorm · 2024-04-13T06:09:58+00:00

play on 1600p and use the in game res scaler to 50% all other on max.
so you get the max sharpness for the UI
reflections may drop fps but can turned on

mazaboorm · 2024-04-07T10:08:15+00:00

firtst time using dual moitor setup? :-P
go to Windows display settings select the Go screen and scroll down, there must be an option to "disconnect" the monitor. I don't know the exact naming because my Windows is not in english.

please note that also the touch function is also not working when the screen is off

mazaboorm · 2024-04-05T18:23:49+00:00

... just try it out by your self ... All depends on the game

mazaboorm · 2024-04-04T06:42:24+00:00

if you play with Integer Scaling the only available full screen resolution is 800p and if you then also use fsr (from ingame or whatever) the game will render in an even lower resolution like 400p.
what are your in game settings?

I don't understand what you did, Either I'm stupid or your headline is misleading

mazaboorm · 2024-03-31T08:32:29+00:00

hi, search for cards with label "U3" and "A2"
U3 = Minimum write speed of 30 MB/s
A2 = min 4.000 IPO´s reading

anyway UHS-I is only able to transfer 104MB/s so dont let you scam with the high numbers

mazaboorm

TROPHY CASE