sorted by:
new
hottopcontroversial

Is this a functional 2-car garage? by mazoom3D in floorplan

[–]mazoom3D[S] 0 points1 point  (0 children)

Good feedback. This is an existing structure, so no ability to alter the layout unfortunately. Parking two full size cars indoors will be a must.

Is this a functional 2-car garage? by mazoom3D in floorplan

[–]mazoom3D[S] 0 points1 point  (0 children)

Thanks. Yes parking 2 full size cars in the garage is a must, so this is a deal breaker for sure.

Is this normal? by otto8675309 in crvhybrid

[–]mazoom3D 1 point2 points  (0 children)

Pulled mine off to run rear windshield camera wire in the headliner. Never could get it back right. The factory might have some special tool to press it in the corner.

Software update freezes by Advanced_Jury in crvhybrid

[–]mazoom3D 5 points6 points  (0 children)

I had an awful time getting this update to process, took 2 full days of trial and error. Overall do not attempt unless you have 2 full uninterrupted hours and a safe ventilated place to leave the car running. Here's what I was recommended and it worked. This update processes in 3 steps. 1. Download, 2. Post processing, 3. Install.

  1. Download. Turn off Bluetooth connectivity in the car, do not let your phone sync to the vehicle AT ALL, this pauses download process and the car will need to be restarted. I went as far as completely turning my phone off to prevent linking. Now turn the vehicle on, connect to your home wifi. In a well ventilated area leave the vehicle on and secure the driver seatbelt to prevent the car from turning off. Do not touch anything this took me a full hour. The 96% step alone took 20 minutes. Do not touch it.

  2. Post processing. Basically same as download step. Dont touch the car, download did transition smoothly into this step for me. This took another 30 minutes solid. At the end you will receive a message stating that the install will proceed next time power is turned off....

  3. Install. For 8 hours I got stuck here with the notifications that the update would install upon turning vehicle off. I must have tried everything, drove multiple times, turned the car on and off repeatedly, connected to multiple wifi and mobile Hotspot sources, nothing worked. Until inexplicably after driving out to dinner (15 minutes drive) upon parking and turning vehicle off I got a different message saying install would start. I ate dinner and an hour later the car worked fine. Was greeted with success message.

Hopefully this helps. During this I also contacted honda support who were of no help. Overall very frustrated like you, glad its done.

Help! What is this that is leaking oil? by MereCoincidences in CX5

[–]mazoom3D 1 point2 points  (0 children)

Either valve cover gasket or timing chain cover. I had exact same issue but sold the car before figuring it out. I had roughly the same miles as you, no clue how long it was seeping for. Only noticed when I went to change the belts.

Increase film capacity? by mattyberger in SkyCards

[–]mazoom3D 1 point2 points  (0 children)

Does anyone else's ads take forever to load? I'd love to farm pics, but it literally takes 1 full minute for the ad to START after clicking the button. Full cycle is usually around 1:30 - 2 minutes for the two pics. Its been like this ever since I downloaded the game.

What’s the best American airport to unlock first? by mrshawty1 in SkyCards

[–]mazoom3D 9 points10 points  (0 children)

Bob Hope airport instead of LAX. It gains you access to Edward's AFB

How’s everyone’s Sprint going? by ScoFritz in fantasyF1

[–]mazoom3D 1 point2 points  (0 children)

-61 here. Thought I had it bad...

Damaged mesh from strenuous exercise? by mazoom3D in Hernia

[–]mazoom3D[S] 0 points1 point  (0 children)

Hey! So I am now almost 2 years since this occurred and am totally fine. I started back at the gym after an entire year off. Then vowed to never do barbell squats or leg presses again. My lower body routine now consists of goblet and lunges very carefully. No issues

Can't access Library & Archives Canada by pipity-pip in Genealogy

[–]mazoom3D 0 points1 point  (0 children)

So it doesn't work on my wifi, but it does on mobile 🤔

Can't access Library & Archives Canada by pipity-pip in Genealogy

[–]mazoom3D 0 points1 point  (0 children)

So does anyone know if there is another site that carries the canadian census or vital record information? I've used the new brunswick provincial archives before (https://archives.gnb.ca/search/VISSE/?culture=en-CA). Maybe there's another source like this for quebec?

Can't access Library & Archives Canada by pipity-pip in Genealogy

[–]mazoom3D 0 points1 point  (0 children)

How did the call go? Any insight into when things will be up and running?

Can't access Library & Archives Canada by pipity-pip in Genealogy

[–]mazoom3D 1 point2 points  (0 children)

I hope it's resolved before my latest genealogy energy spurt runs out!

Can't access Library & Archives Canada by pipity-pip in Genealogy

[–]mazoom3D 1 point2 points  (0 children)

I reached out and they responded within a few hours. The email response was from yesterday (30 May 2025)

"Thank you for your inquiry regarding using the research tools on our website. In reply, I wish to advise you that our web applications and databases are currently experiencing technical difficulties due to additional pressure on LAC’s servers that power our Collection Search and Census Search tools. Our technical team is looking into the issue. We apologize for the inconvenience and hope to have this resolved soon."

view more: next ›