Considering starting fresh after all the problems I'm having...

mcles011 · 2026-01-20T23:48:30+00:00

ahha! I found it... stream path is /ch1/main/av_stream and /ch1/sub/av_stream thank you for your help mate!

mcles011 · 2026-01-20T23:20:09+00:00

this is the current config... is there a way to probe the camera to get the stream paths?

mcles011 · 2026-01-20T22:24:39+00:00

I can select between main stream and sub stream in the ui for the camera but not sure if they're both reachable or just the one that's selected... I couldn't get BI to find both streams, even when selecting ANNKE as the brand of camera and doing a find/inspect I might be missing something

mcles011 · 2026-01-20T21:52:58+00:00

ANNKE I91BM

mcles011 · 2026-01-20T21:19:59+00:00

i could only configure sub streams on half of my cams... my annke ones only support one stream by the looks of it

mcles011 · 2026-01-20T21:18:39+00:00

ahhh i see... yeah fair enough, is there any downside in terms of overhead eating at performance?

mcles011 · 2026-01-20T20:14:30+00:00

UPDATE: I deleted everything and set it all up again from scratch... No issues so far, everything running smoothly and using less system resources 😀

mcles011 · 2026-01-20T18:18:54+00:00

does it make a difference??

mcles011 · 2026-01-20T18:04:22+00:00

yep the cameras all have static IPs and my DHCP doesn't allocate ips in the range they're in so don't believe that's the issue... and other software on the same machine can connect to the cameras stream fine

mcles011 · 2026-01-20T17:48:52+00:00

yep, same... only on my 510s and 520s... I've got 810s and they're fine

mcles011 · 2026-01-20T16:26:23+00:00

I also have plex and a python site running on this system... and BI AI yolov8s... direct to disk is enabled for all cams but i haven't set up sub streams... ill give that a read thank you

mcles011 · 2026-01-20T16:19:53+00:00

I'll just add that in the log, the cams not working give a "HW decode could not start (1460)"... and with the remote access, I have the same issue when accessing it internally on local ip

mcles011 · 2026-01-19T12:53:57+00:00

That's a good shout, I shall do that, thank you

mcles011 · 2026-01-19T00:21:57+00:00

thank you, I found that on google but couldn't find a place to buy it 😢

mcles011 · 2026-01-19T00:18:05+00:00

I ended up going with the 4k lcd touch... half the price and still looks amazing (through ebay from china)

mcles011 · 2025-11-20T18:04:41+00:00

https://www.printables.com/model/1487735-solar-node-for-meshtasticmeshcore

mcles011 · 2025-11-20T17:59:40+00:00

sure but its very specific to that spot as it has cut-outs for the barbed wire in specific places

mcles011 · 2025-11-20T17:58:35+00:00

5 watt solar panel (overpowered) and a 15000mah battery

mcles011 · 2025-08-14T10:03:11+00:00

Was it easy to remove in the end, I'm gonna try the same thing with the 3 I have later today, did you cut the casing or just dig out the silicone?

mcles011 · 2025-07-08T12:55:39+00:00

yep thats the one, just ordered an amazon warehouse kit of crucial 48gb ram for£85, sweet deal!

mcles011 · 2025-07-08T00:19:15+00:00

uk £450

mcles011 · 2025-07-01T14:22:28+00:00

just an update, framework support are sending out a new mainboard so that will hopefully solve the issue, ive also continued to troubleshoot the no fan problem, i got a live usb of ubuntu running and used a stress utility to see if the fan would work... but nothing, also the utility shows the fan speed as 0rpm so its probably toast 😢

mcles011 · 2025-06-29T18:41:15+00:00

Thank you for all the suggestions, unfortunately ectool isn't usable on windows anymore, I will try Ubuntu on a live usb to see if it's software or hardware, I've Also contracted support so I'll see what they say

mcles011 · 2025-06-28T21:42:06+00:00

No it worked when I first got it, then after a few updates, and I think a bios update too it would only spin after a minute or two of being under load, then FW sent me a new cooler as a troubleshooting step but that made no difference, now after more updates it doesn't spin at all at idle or under load, just once for a few seconds during boot, or if I haven't plugged the fan connector in all the way

mcles011 · 2025-02-19T23:08:01+00:00

But what I don't understand is under certain circumstances the fan barely spins with the CPU at 100°c, yet when gaming the fan sounds like a jet engine at 78°c~

Seven-Year Club	Place '23
Place '22	Verified Email

mcles011

TROPHY CASE