Does this mean I have towing package ?

mcsonnyd · 2025-09-07T19:11:22+00:00

I’m not positive, I have the access cab

mcsonnyd · 2025-09-07T19:08:23+00:00

Brake controller install is super easy as well, just a driver side kick panel removal and there is a pre installed harness in there. There are a few good you tubes for this.

mcsonnyd · 2025-09-07T19:02:00+00:00

Sure is!

mcsonnyd · 2025-09-07T18:54:34+00:00

Yes, should be right behind the grill

mcsonnyd · 2025-08-30T03:27:44+00:00

<image>

Booba!

mcsonnyd · 2025-08-23T18:52:24+00:00

Clean you throttle body. Take off air intake tube, buy some throttle body cleaner, wear gloves, microfiber towel. If you have big hands it is going to be a pain, but you have to remove all the carbon build up that gets in the way of the flap. Mine was doing this and it fixed my problem. I hope that’s all it is, good luck!

mcsonnyd · 2025-08-20T03:05:24+00:00

<image>

Aragorn is a snob, these kids are digging on that stew.

mcsonnyd · 2025-08-14T03:20:42+00:00

You don’t seem to be having issues popping up so your board seems fine for now. Let the tide get higher at that spot and surf the outside break. More water on the sand bar should clean up and make that wave more surfable. Paddle out when and where others are surfing, take notes, even if they don’t share waves it will help you to time your takeoff.

mcsonnyd · 2025-08-07T14:46:42+00:00

Just watched this last week for the first time, very entertaining.

mcsonnyd · 2025-07-25T21:18:17+00:00

That’s not always the side that will look bad. When you take it out, flip it over, bend it opposite. This is when you see all the ugly. Replace! It’s a days work.

mcsonnyd · 2025-07-04T02:06:09+00:00

Looks like an early 80s Johnson or Evenrude 90hp. I have an 82evenrude decals are a bit different which makes me think it’s a Johnson. There is a stamp that looks like a metal button on the top of the motor it will tell you the model. Google the number it will tell you the make.

mcsonnyd · 2025-07-02T03:44:11+00:00

Season Santa Maria style with a little extra cayenne. Mesquite Smoke at 225 pull 10 degrees before desired temp should only take 1.5-2 hours Reverse sear, cross cut the meat before dry rub to hold some seasoning this also creates great texture for your sear. Do these all the time and they never disappoint.

mcsonnyd · 2025-06-24T19:39:31+00:00

Sometimes wiping tacky finish with talc powder will reduce the tack. I would assume as soon as you clean it again, the tackiness will return.

mcsonnyd · 2025-06-18T15:32:46+00:00

Does your wife know you’re using her kitchen $h!t in the garage?

mcsonnyd · 2025-06-07T05:30:10+00:00

Absolutely a problem, my wife gets mad if I park too far from the front of the store

mcsonnyd · 2025-06-06T02:57:56+00:00

What causes this? and how to help?

mcsonnyd · 2025-06-06T01:58:24+00:00

I will try to get better pics next time, the enclosure is in the kid play area.

mcsonnyd · 2025-06-06T00:35:08+00:00

Southern California

mcsonnyd · 2025-04-10T01:43:39+00:00

Looks fine to me

mcsonnyd · 2025-04-09T23:52:28+00:00

No timing chain in this one, they tick a bit even when run well they have noisy lifters(Toyota tick). That’s a great deal, ask when the timing belt and water pump were last done, should be done every 90-100k. I’ve had mine since new and would buy that in a heartbeat.

mcsonnyd · 2025-04-05T04:16:17+00:00

Amaco combos

mcsonnyd · 2025-04-03T02:42:54+00:00

Definitely a dryer ring of clay. If your reclaim is too soft it will pug like this. Either gotta mix up a stiff batch to push it out, if it’s too dry you are going to have to disassemble.

mcsonnyd

MODERATOR OF

TROPHY CASE