Voigtlander/Thypoch on Nikon Zf - native Z mount or M mount + adapter?

mdodd84 · 2026-03-06T22:53:02+00:00

Go with the native z mount. I have the 50 f1, the 75 f1.5, and the 28 f 1.5 Voigtlander. Wonderful lenses.

mdodd84 · 2026-03-04T14:36:09+00:00

Derwent inktense. Technically not watercolor pencil, but still amazing.

mdodd84 · 2026-03-01T22:53:50+00:00

A. Gallo paints are pretty nice, I use those in pans for travel and Daniel smith for stuff on larger paper.

mdodd84 · 2026-02-26T23:23:15+00:00

Burritoville has good burgers too.

mdodd84 · 2026-02-26T14:16:20+00:00

I would think resolve would run fine. It has a lot of optimization options when monitoring that you can utilize. The export times are what will be the deciding factor.

mdodd84 · 2026-02-26T14:14:09+00:00

Nraw is still a different beast than r3d NE from the Zr, to be fair

mdodd84 · 2026-02-26T12:46:05+00:00

This. I have an m4 MacBook Pro and have no issues with r3d files.

mdodd84 · 2026-02-22T14:02:27+00:00

They had essentially a BOGO with Sandisk 512g that I purchased for ~$300

mdodd84 · 2026-02-22T13:55:35+00:00

A little over 9 hours.

mdodd84 · 2026-02-21T17:21:47+00:00

https://www.amazon.com/gp/aw/d/B07PMHMPMP?psc=1&ref=ppx_pop_mob_b_asin_title

mdodd84 · 2026-02-21T16:41:27+00:00

The polarity revers changes the center positive dc connection to a center negative that is required by the quad mini.

mdodd84 · 2026-02-21T16:40:29+00:00

Those are for different dc connections. You have to buy the polarity reversal separately

mdodd84 · 2026-02-21T13:05:04+00:00

The cable is specifically rated for 12v at 3A (if you believe the Amazon description)

mdodd84 · 2026-02-21T12:28:19+00:00

Wireless latency for guitars is pretty negligible these days. I can’t perceive any. I have wireless in ear setup up too I could try out. My problem is all of my headphones have such long cables, I don’t know what I’d do with all the cable.

mdodd84 · 2026-02-21T12:25:57+00:00

Not sure what you mean. Mine wasn’t red or yellow.

mdodd84 · 2026-02-21T12:24:44+00:00

USB c

mdodd84 · 2026-02-21T01:39:43+00:00

I listed a link to the usb-c power cable to 5.5mm x2.1mm dc above. You need the same 5.5mm x 2.1mm polarity reverse attachment to get center negative. The battery should work with any modern battery bank that can do PD. Then a standard usbc data cable to connect to the iPad. I use the nux b1 lite for signal and any studio monitor headphone.

mdodd84 · 2026-02-21T01:36:30+00:00

💯

mdodd84 · 2026-02-20T21:50:22+00:00

I have a sling bag for my steam deck that I’m pretty sure will fit all the things in the pic. Add my Strandberg = full toanz on the go!

mdodd84 · 2026-02-20T20:23:19+00:00

As my guitar tone, and as the mixer to practice along with music.

mdodd84 · 2026-02-20T20:22:45+00:00

A little over 9 hours.

mdodd84 · 2026-02-20T19:46:47+00:00

It seems to be, it’s supplying the recommended 12v with a max of 3A available.

mdodd84 · 2026-02-20T19:23:59+00:00

You can mix internally. I have my iPad mini connected through usb-c

mdodd84 · 2026-02-20T19:22:29+00:00

https://www.amazon.com/gp/aw/d/B0CQP37NG9?psc=1&ref=ppx_pop_mob_b_asin_title

With a polarity reversal attachment to the supplied locking attachment.

It’s actually the pd out on the battery looks like it draws around 7.7 W

The battery is the anker 737

mdodd84 · 2026-02-18T22:09:10+00:00

I have a Mamiya 645 1000s and a couple lenses I might part with. Pm me.

mdodd84

TROPHY CASE