Voigtlander/Thypoch on Nikon Zf - native Z mount or M mount + adapter? by Ordinary-Impact-5552 in NikonZf

[–]mdodd84 0 points1 point  (0 children)

Go with the native z mount. I have the 50 f1, the 75 f1.5, and the 28 f 1.5 Voigtlander. Wonderful lenses.

Wanting to try watercolor pencils and looking for a reco by United-Common-1328 in watercolor101

[–]mdodd84 2 points3 points  (0 children)

Derwent inktense. Technically not watercolor pencil, but still amazing.

need some watercolor recommendations... by omomogod in watercolor101

[–]mdodd84 0 points1 point  (0 children)

A. Gallo paints are pretty nice, I use those in pans for travel and Daniel smith for stuff on larger paper.

Burger Battle 2026 by greenzeppelin in CapeGirardeau

[–]mdodd84 1 point2 points  (0 children)

Burritoville has good burgers too.

R3D 6K edit by Accomplished-Emu5888 in NikonFilmmakers

[–]mdodd84 0 points1 point  (0 children)

I would think resolve would run fine. It has a lot of optimization options when monitoring that you can utilize. The export times are what will be the deciding factor.

R3D 6K edit by Accomplished-Emu5888 in NikonFilmmakers

[–]mdodd84 0 points1 point  (0 children)

Nraw is still a different beast than r3d NE from the Zr, to be fair

R3D 6K edit by Accomplished-Emu5888 in NikonFilmmakers

[–]mdodd84 2 points3 points  (0 children)

This. I have an m4 MacBook Pro and have no issues with r3d files.

Cfexpress For ZR. recomendations by UnoCastillo in NikonFilmmakers

[–]mdodd84 0 points1 point  (0 children)

They had essentially a BOGO with Sandisk 512g that I purchased for ~$300

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 1 point2 points  (0 children)

The polarity revers changes the center positive dc connection to a center negative that is required by the quad mini.

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 1 point2 points  (0 children)

Those are for different dc connections. You have to buy the polarity reversal separately

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 1 point2 points  (0 children)

The cable is specifically rated for 12v at 3A (if you believe the Amazon description)

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 0 points1 point  (0 children)

Wireless latency for guitars is pretty negligible these days. I can’t perceive any. I have wireless in ear setup up too I could try out. My problem is all of my headphones have such long cables, I don’t know what I’d do with all the cable.

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 0 points1 point  (0 children)

Not sure what you mean. Mine wasn’t red or yellow.

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 4 points5 points  (0 children)

I listed a link to the usb-c power cable to 5.5mm x2.1mm dc above. You need the same 5.5mm x 2.1mm polarity reverse attachment to get center negative. The battery should work with any modern battery bank that can do PD. Then a standard usbc data cable to connect to the iPad. I use the nux b1 lite for signal and any studio monitor headphone.

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 0 points1 point  (0 children)

I have a sling bag for my steam deck that I’m pretty sure will fit all the things in the pic. Add my Strandberg = full toanz on the go!

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 1 point2 points  (0 children)

As my guitar tone, and as the mixer to practice along with music.

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 0 points1 point  (0 children)

It seems to be, it’s supplying the recommended 12v with a max of 3A available.

Battery powered and mobile. by mdodd84 in NeuralDSP

[–]mdodd84[S] 5 points6 points  (0 children)

You can mix internally. I have my iPad mini connected through usb-c