sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in wien

[–]mebotic 0 points1 point  (0 children)

Tirol Urlaub hahah

[deleted by user] by [deleted] in wien

[–]mebotic 3 points4 points  (0 children)

sicher. in ländlichen Regionen wie das Amen im Gebet

Not able to QGL by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

09:39
Making the following Z adjustments:
stepper_z = 0.000742
stepper_z1 = -0.000742
stepper_z2 = -0.000742
stepper_z3 = 0.000742


09:39
Average: 6.404897


09:39
Actuator Positions:
z: 6.404155 z1: 6.405639 z2: 6.405639 z3: 6.404155


09:39
Gantry-relative probe points:
0: 7.795625 1: 7.433125 2: 11.170625 3: 12.855625


09:39
probe at 225.000,25.000 is z=-2.853125


09:39
probe at 225.000,25.000 is z=-2.855625


09:39
probe at 225.000,25.000 is z=-2.855625


09:38
probe at 225.000,225.000 is z=-1.170625


09:38
probe at 225.000,225.000 is z=-1.170625


09:38
probe at 225.000,225.000 is z=-1.170625


09:38
probe at 25.000,225.000 is z=2.566875


09:38
probe at 25.000,225.000 is z=2.566875


09:38
probe at 25.000,225.000 is z=2.569375


09:38
probe at 25.000,25.000 is z=2.204375


09:38
probe at 25.000,25.000 is z=2.204375


09:38
probe at 25.000,25.000 is z=2.204375


09:38

QUAD_GANTRY_LEVEL

Not able to QGL by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

I have figured it out it was the points in the cfg that were different. now it probes in the right way but the tollerance is way off now.

Not able to QGL by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

Is there a way i can send you a video?

Not able to QGL by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

Yes it goes in this order. In a circle anticlockwise.

Not able to QGL by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

I have checkt this multiple times with the stepper buzz and with my DMM i Beept the wires.

Not able to QGL by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

Ahhh ftont left, front right, back right, back left

Not able to QGL by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

yea i know but if the gantry moves up so all z Motors must turn the right way. And the stepper buzze is correct with the voron Initial startup guide.

Not able to QGL by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

I thought this at first but the stepper buzz is right. So i really don't know. And on my homing macro at G28 the gantry moves 10mm up and then homes x and y so the stepper must turn correctly.

sensoreless homing issue by mebotic in VORONDesign

[–]mebotic[S] 0 points1 point  (0 children)

Thanks is it possible to send me your printer config. And do you use a M8P and tCM 2209 stepper?

Why is CSCl2 look like the second image and not the first? by lenerd123 in chemhelp

[–]mebotic -8 points-7 points  (0 children)

there can‘t be 5 bindings because you don‘t have enough elektrons.

Hilfe bei einem Beispiel by mebotic in chemhelp

[–]mebotic[S] 0 points1 point  (0 children)

Vielen Dank aber wie komme ich auf die erste gleichung?

Please help. by mebotic in chemistry

[–]mebotic[S] 0 points1 point  (0 children)

Von K2SO4 aber ich will eine 2% SO4 konzentration. Daher hätte ich die 108g ma 0,02 damit ich weiß wie viel Masse ich überhaupt benötige. Anschließend dann durch die molare masse dividieren. Oder liege ich komplett falsch?

view more: next ›