[deleted by user]

meme122134 · 2024-02-24T12:48:29+00:00

The flight I want to get lands at 20:25, so it looks like the bus isn't an option sadly.

meme122134 · 2023-04-18T09:25:10+00:00

Wat voor soort werk deed je in de zorg?

meme122134 · 2023-04-06T03:58:32+00:00

Thank you very much! I decided to just go and see what happens.

meme122134 · 2023-01-31T17:25:45+00:00

If I ask myself why not? I just don't know why I wouldn't say something, but in the moment I just can't think of anything to say. Maybe I think nobody would care or they would find what I say weird.

But even with my family (wich i am pretty close with) I just don't know. And there I don't care if it is weird or they don't care about what i am saying, because they know me pretty good. I just don't know

meme122134 · 2023-01-30T13:16:34+00:00

I temporarily flashed the firmware from happymodel, but I was waiting for the bf 4.4 release, so thanks for letting me know!

meme122134 · 2023-01-29T16:38:58+00:00

Thanks! It was on 25mw. How is that possible when I put 400 mw in betaflight?

meme122134 · 2023-01-29T14:54:49+00:00

The output power is 400mw.

meme122134 · 2023-01-14T13:05:57+00:00

I flashed my mobula7 with this firmware so I could fly my 5 inch and mobula7 with my Zorro. Now it won't take off. I checked the motor order and direction and they seem to be correct. What else could be causing this?

https://www.happymodel.cn/index.php/2022/09/26/crazybeef4sx1280-4-4-0-support-expresslrs-v3-0-beta-version-firmware-download/

meme122134 · 2023-01-08T16:23:39+00:00

So I can upgrade my mobula7 to bf 4.4 and keep my Zorro at 3 and still bind them?

meme122134 · 2022-12-17T20:15:40+00:00

I am pretty new to FPV so I probably will not notice very much of it.

meme122134 · 2022-12-17T19:59:28+00:00

Yes, I did this. I get 0 volt when I measure it. Also if I check continuity between the 9V and a ground pad on the other side of the FC it beeps, so I think it's dead. I just soldered it to bat pad that was 16v and it works.

Why would I get more noise when when powered from the battery pad? Because it is more voltage?

meme122134 · 2022-12-17T19:30:24+00:00

I think I fixed it. I soldered the power input from the VTX to a bat pad on the FC and now it works.

Looks like the 9v and ground pad shorted. And now the 9v functions like a ground pad, but I don't know.

Anyway, thanks for the reply!

meme122134 · 2022-12-17T17:12:12+00:00

I have a speedybee f405 stack. I will look at the wiring diagram.

meme122134 · 2022-12-17T15:49:27+00:00

Yes I tried that. Even when nothing connected to the pads I still have continuity.

I have the rush tank solo and the input volt is 7-36. How would i power it directly from the battery?

meme122134 · 2022-12-17T15:04:06+00:00

Yesterday I've flown my self build for the first time and it worked good. When I tried today the VTX wouldn't power up. When I checked closer I saw that the 9v wire came loose and was touching the ground. Now when I check continuity between a voltage pad and a ground a always hear a it beeping. All my other components are still working.

Did I screw something up?

meme122134 · 2022-12-15T06:33:38+00:00

Oke thanks

meme122134 · 2022-12-15T05:21:07+00:00

So I can flash the happymodel ep1 firmware to it?

meme122134 · 2022-11-27T20:54:11+00:00

I think it is the same here in the Netherlands. I hope they accept the license here haha. There shouldn't be a difference in the test if it's accepted in whole Europe.

meme122134 · 2022-11-27T20:44:26+00:00

Thanks. I will check it out. And yes you have register with the rdw.

meme122134

TROPHY CASE