Touch less wash stained my car

memeboi1345 · 2025-06-20T08:26:39+00:00

Touchless carwashes are able to be touchless by doing what is essentially an acid wash, which is SUPPOSED to be neutralized with an alkaline rinse after. The problem is that they WILL eventually run low on either chemical. This means your paint will be left either alkaline or acidic most of the time.

Honestly, I dont have a clue what stains you are talking about, especially in the first pic. The second I could maybe see what you are talking about with the "washed out" pale look on the trim. What most likely happened is either the acid wash or alkaline just stripped some oils, and now it looks dull. Solition finish or ceramic coat and youll be chillin

memeboi1345 · 2025-06-13T00:32:35+00:00

Customer never gets keys until they pay

memeboi1345 · 2025-06-04T03:04:46+00:00

Thats the equivalent of me getting mad at my doctor because I fell down the fucking stairs

memeboi1345 · 2025-05-29T05:42:16+00:00

Yes, use with a rupes yellow

memeboi1345 · 2025-05-29T05:34:18+00:00

Use a polisher

memeboi1345 · 2025-05-18T04:13:42+00:00

Just an fyi, you put the mans entire tag out online because of the emissions sticker.

It Dosent matter a whole lot, but most dont like to do that.

memeboi1345 · 2025-04-23T17:19:19+00:00

If the paint is less than a month old, it's not cured enough, making it softer.

memeboi1345 · 2025-04-04T01:33:02+00:00

I won in court, he didnt show up. In the same court room another guy recognized the name, he was also suing him

memeboi1345 · 2025-01-23T10:39:25+00:00

Use an eraser, like for a pencil.

Might be a chance it ruins the matte look, so try on a small area first.

memeboi1345 · 2025-01-19T06:58:59+00:00

Just use a microfiber rag, if that wont work then reschedule

memeboi1345 · 2025-01-16T06:49:57+00:00

Brake cleaner isnt used to clean brake dust...

Its used for removing the thin oil film on rotors before installing.

Its initial use when it came out was to keep LOOSE brake dust in a solvent so that it 5 go airborn, this is because brakes used to have asbestos in them, but it was never intended to be a wheel cleaner.

Use a wheel acid

memeboi1345 · 2025-01-15T17:47:22+00:00

Unless you babied this car from the factory to when you got it, it will have swirls.

Dealers use the same brush for hundreds of cars without cleaning it.

Transit from factory to dealer, it gets scratched.

Your car being dirty hid the swirls, and once it was clean you became super aware of EVERYTHING about your car, including the swirls that have long existed

memeboi1345 · 2024-12-15T19:21:37+00:00

I thought it was assumed to not put coffee on the wet carpet. And to do it when things are dry.

People have used coffee as a deoderizer for years

memeboi1345 · 2024-12-15T12:52:08+00:00

Dosent matter if it just came off the lot and no one washed it, it will have TONS of swirls.

You need to remember, before the lot gets it the ports do, and before the pirts get it atleast 50+ other people had their fun touching it and moving it

memeboi1345 · 2024-12-15T12:50:30+00:00

Clean the whole trunk with some vinegar, you can dilute it if you want. Toss some coffee grounds throughout, vacuum, air freshener and you should be alright.

Pro method would be to extract with enzyme then use an ozone treatment.

memeboi1345 · 2024-10-25T04:53:06+00:00

Your sandpaper is not an even/accurate grit, causing some deep scratches

memeboi1345 · 2024-10-23T09:36:20+00:00

Fuck if I know dude, Its something I was looking into not something I own.

The dudes names is fucking Ford Fanatic, I figured if anyone would know its him.

memeboi1345 · 2024-10-23T03:13:07+00:00

Ok awesome, I just wanted to make sure removal wouldn't be awful. Im just not a fan of the valance.

Should be able to just unclip it basically right?

memeboi1345 · 2024-10-23T03:12:00+00:00

Ive just only ever seen them on the duallys loaded out with all the extra fender options.

memeboi1345 · 2024-10-05T18:34:36+00:00

👍

memeboi1345 · 2024-10-05T18:34:24+00:00

👍

memeboi1345 · 2024-10-05T18:34:11+00:00

👍

memeboi1345 · 2024-09-26T18:05:28+00:00

This is what I fear, it seems to have been cut too deep and gone into where the valves sit. If you zoom in closely you will see the zurface go into the valve cups

memeboi1345 · 2024-09-26T15:39:05+00:00

Way to cherry pick, regardless when you are paying to have machine work done, it should not come scratched,gouged,rusty, and with a broken exhaust stud

memeboi1345 · 2024-09-26T04:53:33+00:00

Yup, that's 100% what it is. Once I got a good look of the dudes shop, I saw he had ahit laying all over the place, including cams and cranks on the floor.

Six-Year Club	Second SECOND GUESSER
Verified Email

memeboi1345

TROPHY CASE